Introducing the WFT 2 Trimmer - the ultimate tool for precision trimming!
The WFT 2 Trimmer from LITTLE CROW GUNWORKS is the next generation of WFT trimmers, designed to enhance your reloading experience. With two main improvements, this trimmer is capable of trimming up to .45 caliber and features interchangeable trim chambers.
Key Features:
- Interchangeable Trim Chambers: Unlike the original WFT, the WFT 2 allows for easy swapping of trim chambers thanks to a slight slip fit in bearing with a groove for an O-ring that creates a secure press fit.
- Half Inch Shaft: The WFT 2 comes with a half inch shaft, requiring a compatible half inch chuck for operation.
- Easy Chamber Changes: Changing trim chambers is simple: remove the cutter and use the provided knock-out dowel to push out the chamber.
- Precision Cutting: Setting the cutter depth is straightforward—just place a "master case" in the trim chamber, slide the cutter to the case mouth, and tighten the set screws.
Trimming with the WFT 2 is as precise and clean as with our original trimmer. The trim chamber selection is based on specific cartridges, but it still trims by case family—just order the largest chamber in the family you intend to trim.
Please note that this unit and its inserts do not chamfer or deburr the case mouth of the cartridge case while trimming. If you cannot find the cartridge you need, feel free to contact our Special Order Department at 800-741-0015.