The WFT 2 Trimmer: Precision Meets Innovation
The WFT 2 Trimmer from LITTLE CROW GUNWORKS is the next generation of WFT trimmers, designed for enthusiasts and professionals alike.
Key Features:
- Caliber Compatibility: Capable of trimming up to .45 caliber.
- Interchangeable Trim Chambers: Easily swap out trim chambers for various cartridges.
- Half Inch Shaft: Requires a half inch chuck to drive the trimmer.
The most requested feature by our customers was the ability to interchange trim chambers. Unlike the original WFT, which used a press fit, the WFT 2 utilizes a slight slip fit in bearing with a groove cut for an O-ring, creating a secure press fit.
Easy Operation:
Changing trim chambers is straightforward. Simply remove the cutter and push out the trim chamber using the provided knock-out dowel. To install a new trim chamber, place it on a flat surface and steadily push the housing onto it.
Adjustable Cutter Depth:
Setting the cutter depth is a breeze. Place a master case in the trim chamber, slide the cutter up to the case mouth, and tighten the set screws for a precise cut.
Trimming with the WFT 2 is just as precise and clean as with our original trimmer. The trim chamber selection is based on specific cartridges, but it still trims by case family—just order the largest chamber in the family you intend to trim.
Note: This unit and its inserts do not chamfer or deburr the case mouth of the cartridge case as it is trimmed.
If you can't find the cartridge you need, please contact our Special Order Department at 800-741-0015.