Introducing the next generation of precision trimming with the WFT 2 Trimmer!
The WFT 2 Trimmer from LITTLE CROW GUNWORKS is designed for efficiency and versatility, making it an essential tool for any gunsmith or firearm enthusiast.
Product Features:
- Caliber Compatibility: Trims up to .45 caliber.
- Interchangeable Trim Chambers: Easily switch between different trim chambers without press fitting.
- Half Inch Shaft: Requires a half inch chuck for operation.
- Precision Trimming: Achieves clean and accurate trims similar to the original WFT.
The WFT 2 features a half inch shaft and is designed to work with a half inch chuck. One of the most requested features by our customers is the ability to interchange trim chambers effortlessly. Unlike the original WFT, which required press fitting, the WFT 2 utilizes a slip fit design with a groove for an O-ring, ensuring a secure press fit.
How to Change Trim Chambers:
Changing out trim chambers is simple. Just remove the cutter and use the provided knock-out dowel to push out the trim chamber. To install a new trim chamber, place it on a flat surface and steadily push the housing onto it.
Setting Cutter Depth:
Adjusting the cutter depth is straightforward. Place a “master case” in the trim chamber, slide the cutter up to the case mouth, and tighten the set screws for a precise fit.
Note that the trim chamber selection on the WFT 2 is by specific cartridge, but it still trims by case family. Be sure to order the largest chamber in the family you intend to trim. Please be aware that this unit and its inserts do not chamfer or deburr the case mouth of the cartridge case as it is trimmed.
If you can't find the cartridge you need, please contact our Special Order Department at 800-741-0015.