(0) 
Newsletter
The WFT 2 is the next generation of WFT trimmers from LITTLE CROW GUNWORKS, designed to enhance your trimming experience with innovative features.
One of the most requested features by customers is the ability to interchange trim chambers. Unlike the original WFT, where trim chambers were press-fitted, the WFT 2 utilizes a slight slip fit in bearing with a groove cut for an O-ring, ensuring a secure press fit.
Changing trim chambers is straightforward: simply remove the cutter and use the provided knock-out dowel to push out the trim chamber. To install a new trim chamber, place it on a flat surface and steadily push the housing onto it.
Setting the cutter depth is simple. Just place a “master case” in the trim chamber, slide the cutter up to the case mouth, and tighten the set screws for a perfect trim.
Trimming with the WFT 2 is as precise and clean as with our original trimmer. The trim chamber selection is based on specific cartridges, but it still trims by case family—just order the largest chamber in the family you intend to trim.
Please note that this unit and its inserts do not chamfer or deburr the case mouth of the cartridge case as it is trimmed.
If you cannot find the cartridge you need, please contact our Special Order Department at 800-741-0015.
22K Hornet
Itâs a work in progress 25/08/2018
This was difficult for me to get the adjustment right. I used the master case against the cutter and locked the set screws. Installed the trimmer in Dewalt drill and the cases came out .006 short the first time. I readjusted and now itâs + or - .002. Maybe Iâm too much a perfectionist. It is fast. The cutter has chips in the edges and some case chatter a bit till cut no matter how easy I insert the trimmer. Iâll order another cutter when theyâre in stock. Overall I believe most of my challenges are due to âoperator error!â Hence the 5 star rating.
Not the best choice 23/02/2017
I have to give credit to Little Crow Gunworks. They offered to take back my trimmer and fix it after I buggered it up. Using the dowlel to remove the insert caused the entire bottom bearing to pop out. Needed to hear the housing with a torch to get that back in. But I kept it, knowing I will never change out the trim chamber to trim another caliber.
Problems: The WFT required a half inch chuck. THat means your normal power drill will not work. That's just poor design thinking. Second, it is tough to clean. Third, as noted, it does not chamfer, so you get to double-work your brass. Last, it is not easy to adjust the cut height. Bottom line: there are better options.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.
to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.
Whether you're looking to maintain, repair, or upgrade, we've got what you need!
For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.
Massive Selection
From the essentials to the unique, find everything under one roof.
Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.
Browse our collection and discover why we're the trusted name in shooting sports & hunting.
© 2026 Brownells UK
Part of the Brownells Europe Group
Classical view
Mobile view
Help and contact
