Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

RCBS
STEEL NECK SIZING BUSHINGS

076683816474 749014110
Can't Load With RCBS GMM Dies Without One
RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".  
19.9 29.9 24 GBP
Product no.: 749014110
RCBS STEEL NECK DIE BUSHING .332
Mfr Part: 81647 076683816474 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .332

Top takeaways

  1. RCBS Steel Neck Bushings provide precise bullet tension with RCBS Gold Medal Match sizing dies, improving accuracy and extending case life.
  2. Bushings should be self-centered and come in bare steel, requiring lubrication, and it's recommended to have a range of sizes for optimal fit.
  3. To select the correct bushing size, subtract .002"-.003" from the loaded cartridge's outside neck diameter or calculate using case neck wall thickness and bullet diameter.

Attributes

Diameter (in): .332 Delivery weight: 0.113kg

Item details

Made in USA



Product no.: 100060225
RCBS 0.185" STEEL NECK SIZING BUSHING
Mfr Part: 81500 076683815002 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .185
Product no.: 100060236
RCBS 0.199" STEEL NECK SIZING BUSHING
Mfr Part: 81514 076683815149 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .199
Product no.: 100060239
RCBS 0.203" STEEL NECK SIZING BUSHING
Mfr Part: 81518 076683815187 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .203
Product no.: 100060240
RCBS 0.204" STEEL NECK SIZING BUSHING
Mfr Part: 81519 076683815194 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .204
Product no.: 100060241
RCBS 0.205" STEEL NECK SIZING BUSHING
Mfr Part: 81520 076683815200 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .205
Product no.: 100060242
RCBS 0.206" STEEL NECK SIZING BUSHING
Mfr Part: 81521 076683815217 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .206
Product no.: 100060275
RCBS STEEL NECK BUSHING .255
Mfr Part: 81570 076683815705 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 2 £23.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (Breech): 0.255 Diameter (in): .255
Product no.: 749014076
RCBS STEEL NECK DIE BUSHING .287
Mfr Part: 81602 076683816023 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .287
Product no.: 749014077
RCBS STEEL NECK DIE BUSHING .288
Mfr Part: 81603 076683816030 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .288
Product no.: 749014080
RCBS STEEL NECK DIE BUSHING .289
Mfr Part: 81604 076683816047 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .289
Product no.: 749014082
RCBS STEEL NECK DIE BUSHING .290
Mfr Part: 81605 076683816054 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
29.9 GBP 0 £29.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .290
Product no.: 749014112
RCBS STEEL NECK DIE BUSHING .333
Mfr Part: 81648 076683816481 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .333
Product no.: 749014116
RCBS STEEL NECK DIE BUSHING .335
Mfr Part: 81650 076683816504 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .335
Product no.: 749014084
RCBS STEEL NECK BUSHING .291
Mfr Part: 81606 076683816061 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Notify on availability
Out of stock. No ETA.
Specs: Diameter (in): .291
Product no.: 100060324
RCBS 0.325" STEEL NECK SIZING BUSHING
Mfr Part: 81640 076683816405 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
19.9 GBP 0 £19.90 *
Notify on availability
Out of stock. No ETA.
Specs: Diameter (in): .325
Product no.: 100060340
RCBS STEEL NECK BUSHING .356
Mfr Part: 81671 076683816719 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
23.9 GBP 0 £23.90 *
Notify on availability
Out of stock. No ETA.
Specs: Diameter (Breech): 0.356 Diameter (in): .356
Product no.: 100060229
RCBS 0.192" STEEL NECK SIZING BUSHING
Mfr Part: 81507 076683815071 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .192
Product no.: 100060232
RCBS 0.195" STEEL NECK SIZING BUSHING
Mfr Part: 81510 076683815101 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .195
Product no.: 100060244
RCBS 0.211" STEEL NECK SIZING BUSHING
Mfr Part: 81526 076683815262 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .211
Product no.: 100060247
RCBS 0.215" STEEL NECK SIZING BUSHING
Mfr Part: 81530 076683815309 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .215
Product no.: 100060262
RCBS 0.234" STEEL NECK SIZING BUSHING
Mfr Part: 81549 076683815491 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .234
Product no.: 100060276
RCBS STEEL NECK BUSHING .257
Mfr Part: 81572 076683815729 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (Breech): 0.257 Diameter (in): .257
Product no.: 100060295
RCBS 0.280" STEEL NECK SIZING BUSHING
Mfr Part: 81595 076683815958 RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".
Notify on availability
Not available.
Specs: Diameter (in): .280

Achieve perfect bullet tension with RCBS 0.332" Steel Neck Sizing Bushings 🎯. Ideal for reloaders using Gold Medal Match dies. Shop now for precision reloading! 🔍✨

Can't Load With RCBS GMM Dies Without One
RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Steel Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Tech™ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".  
Not available
 
0
In stock
£31.90 * £29.90 - £31.90*
5
Reordered
£18.90 * £16.90 - £18.90*
0
Newsletter