Enhance Your Reloading Precision with RCBS Tungsten Coated Neck Sizing Bushings
RCBS Coated Neck Bushings are designed for those who demand precision in their reloading process. These bushings are interchangeable, allowing you to select the perfect bushing that provides the right amount of tension on the bullet when using RCBS Gold Medal Match neck sizing dies.
Key Features:
- Tungsten Disulfide (WS2) Coating: This anti-friction coating eliminates the need for traditional case lube.
- Self-Centering Design: Ensures proper alignment with the case neck for optimal performance.
- High-End Brass Compatibility: For best results, use with brass that has consistent neck thicknesses.
- Specific Use: Designed exclusively for RCBS Gold Medal neck sizing dies.
RCBS recommends having neck bushings that are one to two sizes above and below your target diameter. This ensures you achieve the best possible neck tension for your ammunition. The RCBS Coated Neck Bushings are a small yet critical component in producing extremely consistent-shooting ammo with your Gold Medal Match sizing dies.
Brownells Gun Tech™ Tip:
There are two effective methods to select the steel neck bushings you need:
- Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension.
- Measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet, and subtract .002" to .003".
Upgrade your reloading setup today with RCBS Tungsten Coated Neck Sizing Bushings and experience the difference in your shooting accuracy.