The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. More...
The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
More...
Customer ratings for L.E. WILSON, INC. 44-40 WINCHESTER CASE GAGE
Number of ratings: 14
From brownells.com: 14
Average rating: 4.9
Great Product !!!(04/04/2014)
All products I purchase are top quality and the best no Hassel Warranty.
Some of the best money...(26/02/2011)
I've ever spent. I had several thousand cases to resize after I discover they do not fit in my AR-15. This little doo-dad tells me instantly with just a glance if I have set my dies to the correct location. Also indicates if case has been sized or not. To use, size your case and insert into comparator. If the head or the mouth sticks out, the case is too long. If the case fits flush to the inside/lower cuts, it WILL fit into ANY rifle for which it is chambered. A great tool. I'm glad I bought mine and I use it with regularity.
Well Made(31/03/2011)
Easy to use, well made and accurate.
How Did I Get Along Without It?(09/09/2012)
I used this gauge to set up my resizing die rather than the "touch and back off" method. I didn't realize how far off I was and careful case prep improved my groups.
223/5.56 Need This Tool!(21/01/2013)
If you are a beginner loading 223/5.56 Ammo this is a must have tool! This tool helps with setting up your bullet setting die so you do not over crimp & end up with FTF!!
absoutely essential for checking loaded(06/01/2014)
The perfect tool for checking your reloads to be sure they won't cause a jam. I fought for years with reloading my AR15 until I purchased this Wilson gauge. I drop every reloaded round into this gauge to be sure it is not oversize. There is just to much inconsistency in brass, so now I can rely on my reloads to feed and fire just like factory stuff.
easy, simple,accurate(27/03/2011)
reloading is easier and more accurate with the right tools
Excellent product(27/03/2013)
Ordered on Monday, arrived on Wednesday. Easy to use and extremly accurate.
Best gauge to ensure saftey(02/09/2012)
The Wilson Case Gauge, in any caliber, allows the individual to have the confidence and assurance that the prepped cases completed for reloading are within spec and will chamber correctly and safely. A must have for any reloader.
Worth every penny(03/04/2017)
I've reloaded for years but never used Wilson products. Setting up for a custom build 22-250, I wanted accurate cartridge headspace measurements and thought I'd try them although there are less expensive versions. This gage is superb tool room quality. You can use it as a go/no-go or using a depth mic measure the deviation from the reference and flip it over and you get case length. Note that they are in the "white" with no surface finish so you must keep them lubricated like precision cutting tools.
Incorrect Size Marking.(23/04/2012)
This gauge is excellent for determining whether case is within tolerance for head space and case length. The gauge I recieved was stamped for 260Rem as ordered. However, the gauge was actually machined to fit 243Win. It was returned for exchange. Otherwise I would give a 5.
Awesome Product(20/05/2016)
I bought this to ensure the correct head space on my reloads. With it I was also able to easily determine that some factory ammo is actually out of SAAMI specs for head space which was causing partial case head separation. Also works great to check the length of your brass for trimming. A+++
This ia a great tool(05/06/2012)
I don't know how I got along woith out it. These gauges are slick and will improve your shooting..
Great tool for quick checks(27/04/2016)
I use mine (I own several calibers ) to check for case stretch after FL sizing. Easily shows if trimming is needed.
749003846 L.E. WILSON, INC. 44-40 WINCHESTER CASE GAGE Mfr Part: CG4440 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003929 L.E. WILSON, INC. 357 SIG CASE GAGE Mfr Part: CG357S The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003930 L.E. WILSON, INC. 300 SAVAGE CASE GAGE Mfr Part: CG3SAV The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003931 L.E. WILSON, INC. 17 REMINGTON CASE GAGE Mfr Part: CG17REM The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003934 L.E. WILSON, INC. 220 SWIFT CASE GAGE Mfr Part: CG22SW The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003937 L.E. WILSON, INC. 25-06 REMINGTON CASE GAGE Mfr Part: CG2506 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003938 L.E. WILSON, INC. 257 ROBERTS CASE GAGE Mfr Part: CG257R The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003939 L.E. WILSON, INC. 280 REMINGTON CASE GAGE Mfr Part: CG280R The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003940 L.E. WILSON, INC. 284 WINCHESTER CASE GAGE Mfr Part: CG284W The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003942 L.E. WILSON, INC. 30-30 WINCHESTER CASE GAGE Mfr Part: CG3030 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003944 L.E. WILSON, INC. 6MM REMINGTON CASE GAGE Mfr Part: CG6244R The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749058028 L.E. WILSON, INC. 6.5MM CREEDMOOR CASE GAGE Mfr Part: CG65CRE The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749017470 L.E. WILSON, INC. 26 NOSLER/28 NOSLER CASE GAGE Mfr Part: CGN0S The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749017469 L.E. WILSON, INC. 25-45 SHARPS CASE GAGE Mfr Part: CG2545S The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018852 L.E. WILSON, INC. 300 NORMA MAG CASE GAGE Mfr Part: CG300NM The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018853 L.E. WILSON, INC. 6.5 PRC CASE GAGE Mfr Part: CG65PRC The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749014759 L.E. WILSON, INC. 6MM ARC CASE GAGE Mfr Part: CGARC The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018855 L.E. WILSON, INC. 6MM BRX CASE GAGE Mfr Part: CG6BRX The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018914 L.E. WILSON, INC. 303 SAVAGE CASE GAGE Mfr Part: CG303S The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018916 L.E. WILSON, INC. 6MM GT CASE GAGE Mfr Part: CG6GT The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018918 L.E. WILSON, INC. 7.62X54 RUSSIAN CASE GAGE Mfr Part: CG7654R The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003849 L.E. WILSON, INC. 32-20 WINCHESTER CASE GAGE Mfr Part: CG3220 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003935 L.E. WILSON, INC. 221 REMINGTON FIREBALL CASE GAGE Mfr Part: CG22RFB The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003941 L.E. WILSON, INC. 303 BRITISH CASE GAGE Mfr Part: CG303B The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003943 L.E. WILSON, INC. 6.5X55MM SWEDE CASE GAGE Mfr Part: CG6555 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749003948 L.E. WILSON, INC. 50 BMG CASE GAGE Mfr Part: CG50BMG The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749058025 L.E. WILSON, INC. 300 AAC BLACKOUT CASE GAGE Mfr Part: CG3ACC The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749058029 L.E. WILSON, INC. 6 XC CASE GAGE Mfr Part: CG6XC The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749014483 L.E. WILSON, INC. 7.5X55MM SWISS CASE GAGE Mfr Part: CG7555 The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018851 L.E. WILSON, INC. 300 PRC CASE GAGE Mfr Part: CG3PRC The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018854 L.E. WILSON, INC. 6MM BRA CASE GAGE Mfr Part: CG6BRA The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018907 L.E. WILSON, INC. 22 NOSLER CASE GAGE Mfr Part: CG2NOS The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018910 L.E. WILSON, INC. 224 VALKYRIE CASE GAGE Mfr Part: CG224V The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018913 L.E. WILSON, INC. 30 NOSLER CASE GAGE Mfr Part: CG30NOS The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
749018915 L.E. WILSON, INC. 33 NOSLER CASE GAGE Mfr Part: CG33NOS The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY
More...
Customer ratings for L.E. WILSON, INC. 44-40 WINCHESTER CASE GAGE
Number of ratings: 14
From brownells.com: 14
Average rating: 4.9
Great Product !!!(04/04/2014)
All products I purchase are top quality and the best no Hassel Warranty.
Some of the best money...(26/02/2011)
I've ever spent. I had several thousand cases to resize after I discover they do not fit in my AR-15. This little doo-dad tells me instantly with just a glance if I have set my dies to the correct location. Also indicates if case has been sized or not. To use, size your case and insert into comparator. If the head or the mouth sticks out, the case is too long. If the case fits flush to the inside/lower cuts, it WILL fit into ANY rifle for which it is chambered. A great tool. I'm glad I bought mine and I use it with regularity.
Well Made(31/03/2011)
Easy to use, well made and accurate.
How Did I Get Along Without It?(09/09/2012)
I used this gauge to set up my resizing die rather than the "touch and back off" method. I didn't realize how far off I was and careful case prep improved my groups.
223/5.56 Need This Tool!(21/01/2013)
If you are a beginner loading 223/5.56 Ammo this is a must have tool! This tool helps with setting up your bullet setting die so you do not over crimp & end up with FTF!!
absoutely essential for checking loaded(06/01/2014)
The perfect tool for checking your reloads to be sure they won't cause a jam. I fought for years with reloading my AR15 until I purchased this Wilson gauge. I drop every reloaded round into this gauge to be sure it is not oversize. There is just to much inconsistency in brass, so now I can rely on my reloads to feed and fire just like factory stuff.
easy, simple,accurate(27/03/2011)
reloading is easier and more accurate with the right tools
Excellent product(27/03/2013)
Ordered on Monday, arrived on Wednesday. Easy to use and extremly accurate.
Best gauge to ensure saftey(02/09/2012)
The Wilson Case Gauge, in any caliber, allows the individual to have the confidence and assurance that the prepped cases completed for reloading are within spec and will chamber correctly and safely. A must have for any reloader.
Worth every penny(03/04/2017)
I've reloaded for years but never used Wilson products. Setting up for a custom build 22-250, I wanted accurate cartridge headspace measurements and thought I'd try them although there are less expensive versions. This gage is superb tool room quality. You can use it as a go/no-go or using a depth mic measure the deviation from the reference and flip it over and you get case length. Note that they are in the "white" with no surface finish so you must keep them lubricated like precision cutting tools.
Incorrect Size Marking.(23/04/2012)
This gauge is excellent for determining whether case is within tolerance for head space and case length. The gauge I recieved was stamped for 260Rem as ordered. However, the gauge was actually machined to fit 243Win. It was returned for exchange. Otherwise I would give a 5.
Awesome Product(20/05/2016)
I bought this to ensure the correct head space on my reloads. With it I was also able to easily determine that some factory ammo is actually out of SAAMI specs for head space which was causing partial case head separation. Also works great to check the length of your brass for trimming. A+++
This ia a great tool(05/06/2012)
I don't know how I got along woith out it. These gauges are slick and will improve your shooting..
Great tool for quick checks(27/04/2016)
I use mine (I own several calibers ) to check for case stretch after FL sizing. Easily shows if trimming is needed.