L.E. Wilson

L.E. WILSON CASE TRIMMER UNIFORM DEBURRING TOOL 30 DEGREES
Wilson Case Mouth Uniformer - 30 degrees

In stock

£18.90 * £17.90 - £26.90*

(Select Items on Sale!)

Old price £24.60

Trimmer Case Holders | Case Trimmers

3.8

L.E. WILSON 308 WINCHESTER CASE GAGE
WILSON CASE GAGE

In stock

£37.90 *

Case Mouth Chamfering

The Wilson Case Mouth Uniformer is designed for use with the Wilson Case Trimmer and deburs the inside of the case mouth only.
It is available in two chamfer angles: a standard 45-degree and a 30-degree specifically for VLD bullets.
The uniformer comes with a crank style handle which can be replaced with a Sinclair power adaptor for use with a drill or rechargeable screwdriver.

3.7

In stock

£43.90 * £42.90 - £59.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .249
NECK SIZING BUSHINGS

4.9

L.E. WILSON 6.5MM CREEDMOOR BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

In stock

£27.90 * £26.90 - £28.90*

Neck Size Bushings

Hardened stainless steel neck bushing from L.E. Wilson with a size marked for the middle and a .003” taper for precise sizing.
Can be reversed for emergency use or fine-tuning if brass hardens or to adjust neck tension without using a smaller size.
Compatible with L.E. Wilson dies only, and not interchangeable with Forster or RCBS dies.

In stock

£84.90 * £69.90 - £89.90*

L.E. WILSON 30 M1 CARBINE CASE LENGTH GAGE
WILSON CASE LENGTH GAGE

The Wilson chamber type bullet seater ensures precise alignment of both bullet and cartridge case.
Its design allows for more accurate bullet seating compared to conventional 7/8 inch to 14 bullet seating dies.
Specifically made for the 6.5 Creedmoor cartridge, it is highly regarded among benchrest shooters.

4.4

In stock

£28.90 *

L.E. WILSON CASE TRIMMER KIT W/STD STOP STAINLESS
CASE TRIMMER KIT W/STANDARD STOP

L.E. WILSON CASE TRIMMER W/MICRO ADJ TIN
CASE TRIMMER KIT W/MICRO ADJUST KIT

In stock

£184.90 *

Case Trimmers

The Wilson Case Length Trimmer Kit includes a stand, clamp, and the renowned Wilson Case Trimmer, with case holders being sold separately.
It is capable of trimming cases from .17 to .45 caliber and features a Stainless/TiN long-lasting finish, complemented with a black oxide coating for durability.
Significant adjustments can be made with the Stop Screw, and the product prides itself on being manufactured in the U.S.A. since 1936.

L.E. WILSON FIRED CASE PISTOL HOLDER 9MM LUGER
WILSON TRIMMER CASE HOLDERS, PISTOL CARTRIDGES

Reordered

£249.90 * £234.90 - £249.90*

Case Trimmers

The kit includes a Wilson Case Length Micro Trimmer with stand, clamp, and has been in production since 1936.
It is capable of trimming .17 - .45 caliber cases and features a TiN finish for durability, with a micrometer for precision adjustments.
Case Holders are sold separately, and the trimmer comes with a new 304 Stainless Steel Handle, all made in the U.S.A. with American Steel.

L.E. WILSON PISTOL MAX GAGE 40 S-W
WILSON PISTOL MAX CASE GAGES

In stock

£24.90 *

Trimmer Case Holders

3.6

In stock

£36.90 * £35.90 - £36.90*

L.E. WILSON 300 WINCHESTER MAGNUM BUSHING NECK DIE
STAINLESS NECK SIZING DIES

In stock

£89.90 * £79.90 - £94.90*

L.E. WILSON 243 ACKLEY IMPROVED MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson, Inc. 300 Winchester Magnum Bushing Neck Die allows for adjustable neck sizing using interchangeable bushings and is used with an Arbor Press.
The neck die sizes the case neck to 3/16" from the mouth end without using a conventional expander, which improves concentricity and extends brass life.
Bushings are not included with the die, and the necessary Neck Die Base is sold separately.

In stock

£139.90 * £134.90 - £139.90*

L.E. WILSON 7MM (0.2863"-0.2868") INSIDE NECK REAMER
WILSON NECK REAMER

The L.E. Wilson Micrometer Top Bullet Seater Die ensures precise bullet-seating depths with a scale in 0.001” increments.
Constructed from durable stainless steel, it is designed for use with an Arbor Press and is ideal for reloaders seeking accuracy.
It allows for major adjustments through a threaded cap and enables reloading bullets long for testing at the range, reducing multiple range visits.

L.E. WILSON 224 VALKYRIE BRASS CASE GAGE
BRASS CASE GAGES

In stock

£43.90 * £38.90 - £48.90*

Case Neck Reamers

Wilson neck reamers ensure proper clearance between the case neck and the chamber to prevent high chamber pressures and improve shooting consistency.
These reamers are designed for use with the Wilson trimmer, replacing the trimmer cutter, and are ideal for forming wildcats from parent cases.
The standard reamers are sized for fired, unsized cases and are .0025" - .003" larger than bullet diameter, with custom sizes available upon request.

3.2

In stock

£59.90 *

L.E. WILSON 5.56MM BUSHING FULL LENGTH DIE
BUSHING FULL LENGTH DIES

The L.E. Wilson, Inc. 224 Valkyrie Brass Case Gage is corrosion-resistant with an excellent surface finish, ideal for case gaging.
This one-piece gage checks overall length for trimming needs and datum to head length for correct headspace to prevent over sizing.
Originally invented in 1935 by Sam (L.E.) Wilson to enhance shooting safety and help prevent case-separation issues.

In stock

£124.90 * £114.90 - £124.90*

L.E. WILSON 30 CALIBER VLD SEATING STEM
WILSON VLD BULLET SEATER STEMS

The L.E. Wilson, Inc. 5.56mm Bushing Full Length Die allows for customizable neck tension and simultaneous body sizing without an expander.
Constructed from high-quality, heat-treated steel, the die is designed to leave 3/16” of the case neck unsized for potentially increased accuracy.
It features interchangeable bushings and a durable lock nut, with neck bushings sold separately; compatible with both L.E. Wilson and Redding bushings.

Replacement Parts & Upgrades

In stock

£29.90 *

The L.E. Wilson VLD Seating Stem is tailored for VLD-style bullets, providing better seating by gripping the bullet lower on its profile.
It is a direct replacement for standard seating stems in L.E. Wilson Chamber Type Bullet Seater Dies, enhancing versatility for reloaders.
The stem is designed with steeper angles to match the unique profile of VLD bullets, catering to Secant, Hybrid, and Tangent designs.

L.E. WILSON 6.5MM CALIBER (0.263) DIE W/EXPANDING MANDREL
EXPANDING MANDREL DIES

In stock

£84.90 *

L.E. WILSON STAINLESS STEEL LOCK NUT W/SET SCREW
STAINLESS STEEL LOCK NUT

The Wilson Expanding Mandrel Sizing Die is designed for new brass cases to ensure consistent neck diameter and proper preparation for seating.
Features include a visible cutout for alignment, interchangeable mandrels for different calibers, and compatibility with standard 7/8ths reloading presses.
Constructed with stainless parts for durability and a long-lasting finish, and includes a precision-manufactured L.E. Wilson lock nut.

Replacement Parts & Upgrades

In stock

£13.90 *

The lock nut is manufactured by L.E. Wilson, Inc. and is made of stainless steel.
It features a set screw to lock reloading dies in place, allowing for consistent depth without readjustment.
Designed to fit 7/8"-14 threads, it is compatible with most reloading dies.

L.E. WILSON 50 BMG MICROSTOP CASE TRIMMER KIT TIN
50 BMG MICROSTOP CASE TRIMMER KIT

L.E. WILSON ADJUSTABLE CASE GAGE .300 WIN MAG
ADJUSTABLE CASE GAGES

In stock

£274.90 * £244.90 - £274.90*

Case Trimmers

The L.E. Wilson .50 BMG Microstop Case Trimmer Kit is designed for precision in processing and preparing fired cases for reloading, accommodating cases from 6mm to .50 BMG.
It features a longer base for handling longer cases and a microstop adjustment for precise trimming.
The kit includes a trimmer, .50-caliber case holder, trimmer stand, case holder clamp, and a micrometer stop, providing all the necessary tools for quality reloaded brass.

In stock

£49.90 *