Attributes
- Delivery weight: 0.018kg
- Shipping width: 83mm
- Shipping length: 146mm
Product no.: 319400900
Mfr. No.: UF1000015
The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and pump guns! You have only to spoil one good gun with a faulty job and you've spent the price of the jig. We have sold a great number of these to gunsmiths during the recent years. The universal comment when we meet scope jig buyers later is "I don't know how I ever did business without it. Would rather almost do without my right arm than lose it now!" The Forster Universal Sight Mounting Fixture was designed to fill the exacting requirements encountered in drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, etc. The Fixture will handle virtually all bolt action, lever action and pump action guns including the Savage 99, Remington 760, etc.; in fact, any single barrel gun as long as the barrel can be laid into the "V" blocks of the Fixture. Tubular magazine guns are done in the same manner by first removing the magazine tube. The Fixture will locate the holes to a standard, predetermined spacing built into the over-arm, or to any other spacing by sliding the over-arm in either direction. "Run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is done through another bushing of the correct tap size, and eliminates cocking of the tap which is a major cause of tap breakage and sloppy holes. The sliding over-arm has three holes with standard spacing of .500" and .860" between centers into which the interchangeable drill and tap guide-bushings fit. The over-arm is keyed and slides in a "T" slot. It is always in true alignment with the exact center of the gun barrel. The main body of the Fixture is cast aluminum. The two "V" blocks are adjustable for height and made of hardened steel accurately ground on the "V" as well as the shaft. Accuracy in every detail has been the first consideration! It is truly a precision fixture that will save its cost over and over again while allowing you to do a really first class job on every gun that comes into your shop.Delivery time approx. 7-14 days.
The Forster Universal Sight Mounting Fixture is the ultimate solution for gunsmiths seeking precision and reliability in scope mounting.
The Forster Scope Mounting Jig meets the exacting requirements of the most particular gunsmith. It is capable of handling virtually all bolt action, lever action, and pump guns! Just one faulty job on a good gun can cost you the price of the jig.
Over the years, we have supplied a significant number of these jigs to gunsmiths, and the universal feedback we receive is, "I don't know how I ever did business without it. I would almost rather do without my right arm than lose it now!"
The Forster Universal Sight Mounting Fixture is specifically designed to tackle the challenges of drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, and more. It accommodates virtually all bolt action, lever action, and pump action guns, including popular models like the Savage 99 and Remington 760. As long as the barrel can be laid into the "V" blocks of the Fixture, it will work seamlessly.
For tubular magazine guns, the process is just as straightforward—simply remove the magazine tube first. The Fixture allows you to locate the holes at standard, predetermined spacing built into the over-arm, or you can adjust the spacing by sliding the over-arm in either direction. The "run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is accomplished through another bushing of the correct tap size, which prevents cocking of the tap—a major cause of tap breakage and sloppy holes.
The sliding over-arm features three holes with standard spacing of .500" and .860" between centers, into which the interchangeable drill and tap guide bushings fit. The over-arm is keyed and slides in a "T" slot, ensuring it is always in true alignment with the exact center of the gun barrel.
The main body of the Fixture is constructed from cast aluminum, and the two "V" blocks are adjustable for height and made of hardened steel, accurately ground on both the "V" and the shaft. Every detail has been designed with accuracy as the top priority!
This precision fixture will save you money over and over again while enabling you to perform a first-class job on every gun that comes into your shop.
A must for any gunsmith 29/02/2012
The fixture is great for drilling holes for scope base mounting! It can be set up for any rifle, within reason.
A must for scop mounts. 21/05/2011
I have use this a few times now with excellent results. Mounts line up with perfect accuracy. Very easy to use with a hand drill. Bushings are great for drilling and taps.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.