Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

APEX TACTICAL SPECIALTIES INC
S&W M&P FLAT-FACED FORWARD SET SEAR & TRIGGER KIT

854263007326 100025314
Drop-In Upgrade Kit Takes Your M&P s Trigger from Factory to Fantastic!
The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains: Aluminum flat-faced trigger Forward set sear  Ultimate Striker Block Kit (striker block, spring & installation tool)  Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation) Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps. Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight. The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop. Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.

SPECS: Kit includes Flat Faced Forward Set Trigger, Forward Set Sear, Ultimate Striker Block Kit(striker block, spring, and Talon Tactical Tool), Forward Set Spring Kit(white trigger return spring, green trigger return spring, polymer slave pin, sear spring, and RAM spring. Trigger only includes the Flat Faced Forward Set Trigger and polymer slave pin.

Does Not fit M&P 2.0 Pistols

244.9 249.9 3 GBP
Product no.: 100025314
APEX TACTICAL SPECIALTIES INC S&W M&P FLAT-FACED FORWARD SET SEAR & TRIGGER KIT-BLUE
Mfr Part: 100-157 854263007326 The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains: Aluminum flat-faced trigger Forward set sear Ultimate Striker Block Kit (striker block, spring & installation tool) Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation) Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps. Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight. The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop. Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.
249.9 GBP 2 £249.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Finish: Blue Make: Smith & Wesson Model: M&P Style: Kit

Top takeaways

  1. The Apex Tactical Kit enhances M&P triggers with a lower pull weight and shortened travel, mimicking a 1911 trigger feel.
  2. It includes a flat-faced trigger, forward set sear, Ultimate Striker Block Kit, and a spring pack with adjustable pull weight.
  3. Compatible with post-June 2011 S&W M&P centerfire pistols; not suitable for M2.0, Shield, BodyGuard, or .22 LR models without modifications.

Attributes

Finish: Blue Make: Smith & Wesson Model: M&P Style: Kit Delivery weight: 0.029kg

Item details

Made in USA
US export classification: 0A501.c



Product no.: 100016327
APEX TACTICAL SPECIALTIES INC FLAT FACED FORWARD SET SEAR & TRIGGER KIT, BLACK
Mfr Part: 100-054 856008005512 The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains: Aluminum flat-faced trigger Forward set sear Ultimate Striker Block Kit (striker block, spring & installation tool) Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation) Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps. Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight. The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop. Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.
244.9 GBP 15 £244.90 *
Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse
Specs: Finish: Black Make: Smith & Wesson Model: M&P Style: Competition, Enhanced
Product no.: 100023495
APEX TACTICAL SPECIALTIES INC FLAT FACED FORWARD SET SEAR & TRIGGER KIT, PURPLE
Mfr Part: 100-155 854263007050 The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains: Aluminum flat-faced trigger Forward set sear Ultimate Striker Block Kit (striker block, spring & installation tool) Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation) Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps. Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight. The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop. Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.
249.9 GBP 5 £249.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Finish: Purple Make: Smith & Wesson Model: M&P Style: Competition, Flat, Enhanced

🎯 Upgrade your S&W M&P with Apex Tactical's Flat-Faced Forward Set Sear & Trigger Kit for a smoother pull & 1911 feel! Choose your pull weight. Shop now! 🔧💥

Drop-In Upgrade Kit Takes Your M&P s Trigger from Factory to Fantastic!
The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains: Aluminum flat-faced trigger Forward set sear  Ultimate Striker Block Kit (striker block, spring & installation tool)  Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation) Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps. Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight. The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop. Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.

SPECS: Kit includes Flat Faced Forward Set Trigger, Forward Set Sear, Ultimate Striker Block Kit(striker block, spring, and Talon Tactical Tool), Forward Set Spring Kit(white trigger return spring, green trigger return spring, polymer slave pin, sear spring, and RAM spring. Trigger only includes the Flat Faced Forward Set Trigger and polymer slave pin.

Does Not fit M&P 2.0 Pistols

Newsletter