Hammers

APEX TACTICAL SPECIALTIES INC 1911 CLASSIC GOVERNMENT HAMMER
1911 HAMMER

This EGW Ignition Kit with Stainless Steel Lightened Hammer is not a 100% drop-in kit and should be installed or checked by a competent gunsmith before use. The kit includes a hard sear, stainless steel lightened hammer, ball head disconnector, evolved sear spring, and 19# ISMI main spring.
EGW hammers should not be coated with applications that require heating as it can make the hammer brittle. Some coatings, like Robar's NP3, are safe for heat-treated components, but it's best to consult the coater beforehand to ensure the process is safe. Coating the hammer can lead to fractures and will void the warranty.
This EGW Ignition Kit falls under the category of hammers and is made of stainless steel with a finish of the same material.

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£134.90 *

EGW HD LIGHTENED HAMMER STAINLESS STEEL
1911 HD LIGHTENED HAMMER

The Apex 1911 Hammer is a direct replacement for the original Colt spur hammer found on the MK IV Series 70 1911A1 or Commander-style.
Made from A-2 tool steel, it is cut on a wire EDM for dimensional consistency and perfectly square hammer hooks.
The hammer hook height is .018-.020” to provide a consistent, clean breaking trigger pull and features a captive half cock notch as found on Mk IV Series 70 Colt pistols.

EGW

In stock Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse

£124.90 * £104.90 - £124.90*

APEX TACTICAL SPECIALTIES INC CZ SHADOW 2 ACTION ENHANCEMENT KIT
CZ SHADOW 2 ACTION ENHANCEMENT KIT

The 1911 HD Lightened Hammer from EGW is made from machined tool steel with cuts on the top and sides to reduce mass without reducing strength, resulting in faster lock time.
The hammer features "tank-tread" cocking serrations for a secure grip and a distinctive appearance. It is vacuum-hardened to resist wear and maintain proper geometry through years of use.
This stainless steel hammer weighs only .4 oz (11g) and is recommended for gunsmith installation. It is precise within .0005" of true and square, making it a reliable choice for any 1911 enthusiast.

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£239.90 *

APEX TACTICAL SPECIALTIES INC CZ 75 B ACTION ENHANCEMENT KIT
CZ 75 B ACTION ENHANCEMENT KIT

The Apex Tactical CZ Shadow 2 Action Enhancement Kit reduces the difference between double-action and single-action trigger pulls, resulting in enhanced performance on the range.
The kit includes direct replacement parts for the factory hammer and sear, which are precision-machined to provide a clean trigger break in single-action combined with a smooth, stack-free double-action pull that's consistent all the way through the firing process.
If used with the Carry Mainspring, the double-action pull measures 6 pounds, while the single-action pull measures 4 pounds. If the Competition Mainspring is installed, the double-action pull drops to 5.5 pounds, while the single-action pull measures 3.5 pounds. The kit will not work in pistols equipped with the B series firing-pin block.

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£239.90 *

BERETTA USA 92/96 SKELETONIZED HAMMER
BERETTA 92/96 SKELETONIZED HAMMER

The Apex Tactical CZ-75 B Action Enhancement Kit is designed to reduce the difference between the first double-action pull and the single-action second shot in your CZ-75 B pistol by up to 2 pounds.
Each kit includes direct replacement parts for the factory hammer and sear, with precision-machined components that provide a clean trigger break in single-action and a smooth, stack-free double-action pull.
The sear and hammer engagement surfaces are matched, eliminating the need for stoning for a precision fit. This kit is not compatible with decocker or Omega models.

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£43.90 *

BERETTA USA HAMMER ASSY TYPE F/G PX4 SC
HAMMER ASSY TYPE F/G PX4 SC

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£54.90 *

BERETTA USA HAMMER PX4 F&G VERSION
HAMMER PX4 F&G VERSION

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£49.90 *

VOLQUARTSEN TARGET HAMMER
RUGER MK II™ TARGET HAMMER

VOLQUARTSEN

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£79.90 *

WILSON COMBAT ULTRALIGHT HAMMER
1911 ULTRALIGHT HAMMER

The Ruger MK II™ Target Hammer by Volquartsen is a drop-in hammer that lightens trigger pull by 35% on MK II™ pistols.
Made of machined steel, the hammer is 1.05" (2.6cm) long, .56" (14mm) wide, and weighs only .5 oz. (14 g).
The hammer is electro-polished to remove even minor imperfections, resulting in an ultra-smooth sear surface and a clean breaking, target-quality, trigger pull. It comes with a strut and pin and fits Ruger MK II and .22/.45 pistols only.

WILSON COMBAT

In stock Delivery time approx. 7-14 days.
8 pcs. in the USA warehouse

£74.90 * £74.90 - £84.90*

APEX TACTICAL SPECIALTIES INC EVOLUTION K- & L-FRAME HAMMER FOR S&W REVOLVERS
EVOLUTION IV K & L FRAME HAMMER

The 1911 Ultralight Hammer by Wilson Combat is designed to minimize weight and provide faster locktime.
Made from A-2 tool steel or stainless steel, it is heat-treated for superior strength and long life.
It fits Series 70 and 80 and requires minor fitting. Its narrow body ensures it won't interfere with slide travel.

4.6

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£249.90 *

BERETTA USA HAMMER UNIT, PX4 SD TYPE F&G
HAMMER UNIT, PX4 SD TYPE F&G

The Apex Evolution IV K/L-Frame Hammer is a replacement for Performance Center revolvers, redesigned with pinned sear and stirrup for consistent performance and made from heat treated 17-4 Ph stainless steel.
The hammer converts the revolver to Double Action Only and lacks a hammer spur for cocking to single action. It works in current production Smith & Wesson K-Frame and L-Frame centerfire revolvers only.
The package includes the Apex Evolution 4 Hammer (K/L-Frame), fully machined revolver sear, sear spring, stirrup and pins, competition and duty/carry rebound slide springs, and firing pin with return spring.

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£209.90 *

HARRISON DESIGN & CONSULTING ORIG COMM IGNITION SET RD HOLE BLK DLC
1911 IGNITION SET WITH COMMANDER HAMMER

HARRISON DESIGN & CONSULTING

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£334.90 * £109.90 - £334.90*

Performance Enhancing Kits | Hammers

1911 Ignition Set with Commander Hammer Harrison Design & Consulting Orig Comm Ignition Set Rd Hole Blk DLC is a performance enhancing kit for pistols, manufactured from top grade tool steel with precise fit and consistent function under demanding conditions.
The hammer is slightly narrowed to avoid unwanted contact with the slide or ejector and features standard original round hole configuration. The sear is shaped to minimize excess material, reducing weight, and fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer.
Available in the white or with an IonBond Black hammer, some fitting may be required for hardened tool steel, hardened to Rc 53-56. The spur has deep serrations to help keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion.

ED BROWN BLUE BARSTOCK HAMMER
1911 BARSTOCK HARDCORE® HAMMER

ED BROWN

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£99.90 *

BERETTA USA HAMMER RELEASE LEVER ASSEMBLY
HAMMER RELEASE LEVER ASSEMBLY

4.5

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£24.90 *