Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

L.E. WILSON, INC. BUSHING FULL LENGTH DIES


284 Winchester Bushing Full Length Sizing Die

L.E. More...

Product no.: 749017496 749017496
L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander  
L.E. WILSON, INC.
81.1 94.6 33 GBP
749017496
284 Winchester Bushing Full Length Sizing Die
Mfr Part: FLD284W L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 1 £88.45 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 284 Winchester

Attributes

Cartridge: 284 Winchester

Item details

Made in USA



749017490
6.5x47mm Lapua Bushing Full Length Sizing Die
Mfr Part: FLD65X47L L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Out of stock, backorder available
Specs: Cartridge: 6.5 x 47 mm Lapua
749017488
6x47mm Lapua Bushing Full Length Sizing Die
Mfr Part: FLD6X47L L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 6 x 47 Lapua
749017499
30 BR Bushing Full Length Sizing Die
Mfr Part: FLD30BR L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Out of stock, backorder available
Specs: Cartridge: 30 BR (Benchrest) Remington
749017481
22 PPC Sako Bushing Full Length Sizing Die
Mfr Part: FLD22PPCF L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 22 PPC
749017494
6.5mm BR Norma Bushing Full Length Sizing Die
Mfr Part: FLD65BR L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 6.5 mm BR (Benchrest)
749017497
7mm BR Bushing Full Length Sizing Die
Mfr Part: FLD7BR L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 7 mm BR (Benchrest) Remington
749017487
6mm PPC Sako Bushing Full Length Sizing Die
Mfr Part: FLD6PPCF L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 6mm PPC
749017485
6mm Dasher Bushing Full Length Sizing Die
Mfr Part: FLD6DASH L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 6 £88.45 *

6 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6 mm Dasher
749017492
6.5 Creedmoor Bushing Full Length Sizing Die
Mfr Part: FLD6CRED L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 8 £88.45 *

8 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6.5 Creedmoor
749017493
6.5x55mm Swede Bushing Full Length Sizing Die
Mfr Part: FLD6555 L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 1 £88.45 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6.5 x 55 mm Swedish Mauser
749017491
6.5-284 Norma Bushing Full Length Sizing Die
Mfr Part: FLD65284 L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 3 £88.45 *

3 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6.5 mm - 284 Norma
749017483
22 PPC USA Bushing Full Length Sizing Die
Mfr Part: FLD22PPCM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 22 PPC
749017482
22-250 Remington Bushing Full Length Sizing Die
Mfr Part: FLD2250 L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 22-250 Remington
749017480
22 BR Bushing Full Length Sizing Die
Mfr Part: FLD22BR L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 22 BR (Benchrest) Remington
749017484
6mm BR Norma Bushing Full Length Sizing Die
Mfr Part: FLD6BR L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 1 £88.45 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6 mm BR Norma
749017489
6mm PPC USA Bushing Full Length Sizing Die
Mfr Part: FLD6PPCM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.95 GBP 0 £81.95 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 6mm PPC
749017486
6XC Bushing Full Length Sizing Die
Mfr Part: FLD6XC L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 0 £88.45 *

Out of stock, backorder available
Specs: Cartridge: 6 mm XC
749017495
6.8 Remington SPC Bushing Full Length Sizing Die
Mfr Part: FLD68SPC L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 1 £88.45 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6.8 mm Remington SPC
749017498
300 AAC Blackout Bushing Full Length Sizing Die
Mfr Part: FLD300B L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
88.45 GBP 2 £88.45 *

2 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 300 AAC Blackout
749014460
6mm Creedmoor Bushing Full Length Sizing Die
Mfr Part: FLD6MCRE L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.8 GBP 3 £87.80 *

3 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 6mm Creedmoor
749018007
25-06 Remington Bushing Full Length Die
Mfr Part: FLD2506 L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.65 GBP 0 £87.65 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 25-06 Remington Die Style: Bushing Full Length Die
749018009
270 Winchester Bushing Full Length Die
Mfr Part: FLD270W L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
81.1 GBP 0 £81.10 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 270 Winchester Die Style: Bushing Full Length Die
749018010
280 Remington Bushing Full Length Die
Mfr Part: FLD280R L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.7 GBP 1 £87.70 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 280 Remington Die Style: Bushing Full Length Die
749018012
30-06 Springfield Bushing Full Length Die
Mfr Part: FLD3006 L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.5 GBP 0 £87.50 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 30-06 Springfield Die Style: Bushing Full Length Die
749018015
300 WSM Bushing Full Length Die
Mfr Part: FLD300WSM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.45 GBP 0 £87.45 *

Out of stock, backorder available
Specs: Cartridge: 300 WSM (Winchester Short Mag) Die Style: Bushing Full Length Die
749018032
7mm WSM Bushing Full Length Die
Mfr Part: FLD7WSM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
87.5 GBP 0 £87.50 *

Out of stock, backorder available
Specs: Cartridge: 7 mm WSM (Winchester Short Magnum) Die Style: Bushing Full Length Die
749018752
300 Remington SAUM Bushing Full Length Die
Mfr Part: FLD3RSAUM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
94.3 GBP 2 £94.30 *

2 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 300 SAUM (Remington SA Ultra Mag) Die Style: Bushing Full Length Die
749018751
300 Remington Ultra Magnum Bushing Full Length Die
Mfr Part: FLD3RUM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
94.6 GBP 1 £94.60 *

1 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 300 Remington Ultra Magnum Die Style: Bushing Full Length Die
749018753
300 Winchester Magnum Bushing Full Length Die
Mfr Part: FLD3WMG L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
94.6 GBP 2 £94.60 *

2 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 300 Winchester Magnum Die Style: Bushing Full Length Die
749018754
338 Lapua Magnum Bushing Full Length Die
Mfr Part: FLD338L L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
94.5 GBP 5 £94.50 *

5 In stock with Brownells USA. Delivery within 7-10 days
Specs: Cartridge: 338 Lapua Mag Die Style: Bushing Full Length Die
749018756
7mm Remington SAUM Bushing Full Length Die
Mfr Part: FLD7RSAUM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
92.6 GBP 0 £92.60 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 7 mm SAUM (Remington SA Ultra Mag) Die Style: Bushing Full Length Die
749018755
7mm Remington Ultra Magnum Bushing Full Length Die
Mfr Part: FLD7RUM L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander
92.6 GBP 0 £92.60 *

Special Order Item: Please allow 5-8 weeks additional processing time.
Specs: Cartridge: 7 mm Remington Ultra Magnum Die Style: Bushing Full Length Die
L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same time. The use of bushings gives you the necessary control to keep the amount of neck resizing to the barest minimum needed. This reduces the risk of "overworking" your brass, extending the life of your cases. These full-length dies use the same bushings as Wilson’s neck sizing dies, so you can size the case neck to provide the exact amount of tension you want on the bullet. Working up a new load with a different bullet? No problem - replace only the bushing, and you’re good to go. Precision-machined, hardened stainless steel Simultaneously sizes case body & shoulder Fits standard 7/8"-14 reloading press stations Uses L.E. Wilson neck-sizing bushings, available here Bushing full-length sizing dies from L.E. Wilson are machined to exceptionally precise dimensions from a special stainless steel alloy that is harder than a Grade 8 bolt. Each die comes with an adjustable-depth decapping rod, a spare decapping punch, and a lock ring. (An expander is not included.) Included: Die body Decapper assembly, including decapping rod & punch Lock ring Hex wrench (for lock ring setscrew) Instructions Not included: Bushing Expander