Barrel Tools

Barrel Chamfering Accessories

In stock

£23.90 * £23.90 - £41.90*

CERROSAFE shrinks within the first 30 minutes of cooling for easy removal and then expands to exact chamber size after an hour.
The alloy melts at a low temperature (158° - 190° F) and should be melted in a clean iron ladle and poured as soon as it is fully melted.
It is essential to remove the casting before it cools to room temperature to avoid it gripping the chamber walls, making it difficult to remove.

3.8

BROWNELLS 17 CALIBER 3/4" 79 CROWN CUTTER
.17 CALIBER CROWN CUTTERS

Barrel Chamfering Cutters

In stock

£69.90 *

CLYMER 284 WINCHESTER FINISHING REAMER
RIMLESS RIFLE CHAMBERING REAMERS

In stock

£174.90 * £154.90 - £214.90*

Wheeler Savage Barrel Wrench

Clymer's 284 Winchester Finishing Reamer is made from high-quality M-7 High-Speed Steel for professional gunsmithing and is guaranteed to last a lifetime when cared for properly.
The reamer is precision-made to SAAMI specifications and is available in both Rougher and Finisher types, with the Rougher being .010" smaller to reduce wear on the Finisher.
It features 6 right-hand cutting, straight flutes with a solid pilot and integral throat, and comes with a 7/16" round shank with 3/8" square drive, except for the .22 RF which has a ¼" round shank.

3.7

Wheeler

In stock

£42.90 *

Barrel Nut Tools

The Wheeler Savage Barrel Wrench is designed for strength and rigidity to assist in barrel removal and installation.
It includes an action wrench that safely surrounds and supports the receiver ring and a 15-inch handle for leverage.
This tool is compatible with both early and late model barrel nuts on Savage 110 and 10 series rifles and has two 1/2" square drive holes for additional tools.

CLYMER 12 GAUGE BACK-BORE REAMER .735 DIA.
"BACK-BORE" REAMERS

MANSON PRECISION RIMLESS RIFLE CARTRIDGE, .30-06 SPRINGFIELD FINISHER
RIMLESS RIFLE CARTRIDGES

In stock

£134.90 * £74.90 - £139.90*

Shotgun Reamers

Clymer's "BACK-BORE" reamers are essential for shotgun barrel and choke modifications, with sizes in .005" increments from .725" to .740" for 12 gauge.
These reamers can be used to back-bore shortened barrels for constriction or to enlarge a choked barrel for extra constriction, benefiting competitive shooters.
Made of M-7 high speed steel, the 5" long reamers are designed for efficient removal of pits from rough bores, improving both the appearance and performance of the shotgun.

MANSON PRECISION

In stock

£234.90 * £234.90 - £409.90*

BROWNELLS .30 MUZZLE BRASS PILOT
BRASS PILOTS

Engineered by Dave Manson, these reamers are made to SAAMI specifications using M7 steel for precise chamber cutting and outstanding accuracy.
Finish Chambering Reamers come with integral throater and solid, fixed pilots, while Throating Reamers allow for chamber customization.
The product is designed for rimless rifle cartridges, specifically the .30-06 Springfield, and is available in various styles for different firearms.

BROWNELLS RIFLE MASTER FACING/CHAMFERING SET W/BRASS PILOTS
RIFLE MASTER CHAMFERING & FACING COMBO SET W /BRASS PILOTS

In stock

£28.90 * £19.90 - £28.90*

Chamfering Tool Pilots

Barrel Chamfering Tool Kits

In stock

£499.90 *

SHILEN 30 CALIBER 1-10" TWIST UNTURNED BLANK STAINLESS BBL
UNTURNED 30 CALIBER BARRELS

SHILEN

In stock - Is a 'Call to order' product.

£329.90 * £294.90 - £329.90*

Barrel Blanks | Rifle Barrel Blanks

The Shilen 30 Caliber barrel is meticulously crafted to ensure high accuracy, with a focus on the quality of the barrel's interior lands and grooves.
These barrels are made using the "Cold Forming" process for rifling and undergo rigorous inspections, including air-gauge and borescope inspections, to guarantee tight tolerances and uniformity.
Shilen's commitment to quality means that only barrels that pass all specifications are sold, ensuring that they enhance the gun builder's reputation for using top-tier components.

CLYMER 6.5 CALIBER BUSHING PACK
PILOT PACKS

CLYMER 6.5MM (0.255" PILOT) 1.5" THROATING REAMER
THROATING REAMERS

In stock

£46.90 * £43.90 - £47.90*

The PILOT PACKS Clymer 6.5 CALIBER BUSHING PACK includes two bushings, one slightly smaller and one slightly larger than the standard size, with tolerances of +.0000/-.0002.
Specifically for the 6.5mm caliber, the standard bushing size is .2560 and the pack provides one .2556 and one .2564 bushing.
Clymer is the manufacturer of the product, which falls under the Home main category.

.357 GROOVE, 1-14 TWIST 27 1/2" DOUGLAS PISTOL BLANK
DOUGLAS PISTOL BARREL

In stock

£99.90 *

Throating Reamers

Clymer 6.5MM Throating Reamer is made from high-quality M-7 High-Speed Steel for durability and longevity.
Designed for professional gunsmiths, it includes 5 left-hand spiral flutes and a 2½° throat angle for precise throat lengthening.
Available for 264/6.5 mm (.264) caliber rifles, it requires stock number and cartridge details for ordering.

DOUGLAS

In stock - Is a 'Call to order' product.

£309.90 *

Barrel Blanks | Rifle Barrel Blanks

The DOUGLAS PISTOL BARREL blank is made of premium quality Double XX Chrome Moly Steel, specifically designed for precision shooting.
It features a 1-14 twist rate, duplicating the Colt Python's rate, which enhances the .357's accuracy for PPC and other precision disciplines.
The barrel blank is 27½" long, made from 4140 CM Steel, and finishes to a 1.2" outer diameter, suitable for handguns.

DOUGLAS .257 1-10 TWIST CM #5 CONTOUR ULTRA RIFLED BARREL
CONTOUR #5

DOUGLAS

In stock - Is a 'Call to order' product.

£349.90 * £324.90 - £469.90*

Rifle Barrel Blanks | Barrel Blanks

Douglas Double XX premium-grade barrels offer proven accuracy and are meticulously manufactured with a focus on smoothness and precision, with tolerances held to .0005 inches.
The barrels come in various calibers and grooves, with .25 caliber barrels featuring a #5 contour and a 1-10 twist rate, made from Chrome Moly Steel.
When ordering, customers must provide the Stock #, caliber, twist, and contour from the chart, and special orders require full payment in advance and are non-cancelable and non-refundable.

CLYMER 264 WINCHESTER MAGNUM FINISHER CHAMBER REAMER
RIMMED & BELTED RIFLE CHAMBERING REAMERS

In stock

£184.90 * £169.90 - £214.90*

CLYMER 6.5 PRC LIVE PILOT FINISHER
LIVE PILOT FINISH REAMERS

Made from high-quality M-7 High-Speed Steel, Clymer's rifle chambering reamers are precision tools designed for professional gunsmiths, offering a lifetime of service with proper care.
These reamers are available in Rougher and Finisher types, with Roughers being .010" smaller to save wear on the Finisher, which is used when fewer chambers are needed.
Designed to SAAMI specifications, the reamers are suitable for the .264 Winchester Magnum cartridge and come with a solid pilot, integral throat, and are stocked in both Rougher and Finisher variants.

In stock

£249.90 * £224.90 - £249.90*