The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
More...
Customer ratings for REDDING TYPE S BUSHING NECK DIE 30 BR
Number of ratings: 2
From brownells.com: 2
Average rating: 5
Type S Bushing Neck Sizing Die(31/03/2011)
Very easy to set up, just remove the expander button and set the amount of neck sizing needed. It sizes just the amount of the neck needed for target or single load varmit shooting. So far I have not found any problems. This is a typical Redding product.
works great(13/04/2011)
very nice die i use it for neck sizing my 338 edge
Product no.: 749005961 REDDING TYPE S BUSHING NECK DIE 220 SWIFT Mfr Part: 71107611760711077 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749005964 REDDING TYPE S BUSHING NECK DIE 6.5X55 SWEDISH Mfr Part: 71132611760711329 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749006082 REDDING TYPE S BUSHING NECK DIE 308 WIN Mfr Part: 71155611760711558 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749006531 REDDING TYPE S BUSHING NECK DIE 280 ACKLEY IMP Mfr Part: 71428611760714283 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749007031 REDDING TYPE S BUSHING NECK DIE 338 LAPUA MAG Mfr Part: 71594611760715945 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749017110 REDDING 6MM CREEDMOOR TYPE S BUSHING NECK DIE Mfr Part: 71443611760714436 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749018631 REDDING TYPE S BUSHING NECK DIE 6.5 PRC Mfr Part: 71487611760714870 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749019255 REDDING 300 PRC TYPE S NECK DIE Mfr Part: 71776611760717765 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749007026 REDDING TYPE S BUSHING NECK DIE 284 WIN Mfr Part: 71141611760711411 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749005962 REDDING TYPE S BUSHING NECK DIE 6MM REM Mfr Part: 71115611760711152 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749007015 REDDING TYPE S BUSHING NECK DIE 20 PPC Mfr Part: 71566611760715662 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749006529 REDDING TYPE S BUSHING NECK DIE 243 WIN ACKLEY IMP 40 Mfr Part: 71420611760714207 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749007023 REDDING TYPE S BUSHING NECK DIE 257 ROBERTS Mfr Part: 71125611760711251 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749006948 REDDING TYPE S BUSHING NECK DIE 7MM IHMSA Mfr Part: 71240611760712401 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749006523 REDDING TYPE S BUSHING NECK DIE 223 WSSM Mfr Part: 71295611760712951 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Product no.: 749011245 REDDING TYPE S BUSHING NECK DIE 6.5X65 RWS Mfr Part: 71762 The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
The Type S Bushing Neck Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushing available in .001" increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decappin pin retainer is also supplied with most Type S Bushing Dies except 17 and 20 Caliber This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
More...
Customer ratings for REDDING TYPE S BUSHING NECK DIE 30 BR
Number of ratings: 2
From brownells.com: 2
Average rating: 5
Type S Bushing Neck Sizing Die(31/03/2011)
Very easy to set up, just remove the expander button and set the amount of neck sizing needed. It sizes just the amount of the neck needed for target or single load varmit shooting. So far I have not found any problems. This is a typical Redding product.
works great(13/04/2011)
very nice die i use it for neck sizing my 338 edge