Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom
817953029466 100042583
The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails.  Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times.  Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
189.9 209.9 3 GBP
Product no.: 100042583
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT DDC
Mfr Part: 05-1404S 817953029466 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
209.9 GBP 1 £209.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Color: DDC Material: Aluminum

Top takeaways

  1. The Super Stabby Bayonet Mount is made from 7075-T6 Aluminum, ensuring it is rigid yet lightweight, and is designed for integration with Picatinny rail systems.
  2. It is optimized for the M9 Bayonet and compatible with M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings, requiring only 5 Picatinny sections for mounting.
  3. Geissele Automatics disclaims responsibility for damage to firearms or injury from the SSBM, which has been tested only on Geissele rails, and stresses the importance of handling the bayonet safely and adhering to firearms safety rules.

Attributes

Colour: DDC Material: Aluminum Delivery weight: 0.163kg

Item details

Made in USA



Product no.: 100042582
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT BLACK
Mfr Part: 05-1404B 817953029459 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
189.9 GBP 17 £189.90 *
Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse
Specs: Color: Black Material: Aluminum
Product no.: 100042584
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT OD GREEN
Mfr Part: 05-1404ODG 817953029473 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
209.9 GBP 2 £209.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Color: O.D. Green Material: Aluminum

🔪 Enhance your tactical gear with the Geissele Super Stabby Bayonet Mount! Lightweight aluminum, M9 compatible. Perfect for your handguard. Learn more! ⚔️

The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails.  Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times.  Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
In stock
£25.40 *
Old price £29.90
5