Help and contact
United Kingdom
(0) Basket
Newsletter
STRIKE INDUSTRIES
MASS DRIVER COMP
134.9
139.9
4
GBP
Product no.: 430105332
STRIKE INDUSTRIES G5 MASS DRIVER COMP - COMPACT (GLOCK 19)
Mfr Part: SI-G5-MDCOMP-C 793811765205 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
STRIKE INDUSTRIES G5 MASS DRIVER COMP - COMPACT (GLOCK 19)
Mfr Part: SI-G5-MDCOMP-C 793811765205 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Specs:
Make: Glock
Model: 19, Gen 5
Product no.: 430105329
STRIKE INDUSTRIES G3 MASS DRIVER COMP - COMPACT (GLOCK 19) 708747548051 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
STRIKE INDUSTRIES G3 MASS DRIVER COMP - COMPACT (GLOCK 19) 708747548051 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Specs:
Make: Glock
Model: 19, Gen 3
Product no.: 430105330
STRIKE INDUSTRIES G3 MASS DRIVER COMP - STANDARD (GLOCK 17)
Mfr Part: SI-G3-MDCOMP-S 708747548440 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
STRIKE INDUSTRIES G3 MASS DRIVER COMP - STANDARD (GLOCK 17)
Mfr Part: SI-G3-MDCOMP-S 708747548440 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Specs:
Make: Glock
Model: 17, Gen 3
Product no.: 430105333
STRIKE INDUSTRIES G5 MASS DRIVER COMP - STANDARD (GLOCK 17)
Mfr Part: SI-G5-MDCOMP-S 793811765199 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
STRIKE INDUSTRIES G5 MASS DRIVER COMP - STANDARD (GLOCK 17)
Mfr Part: SI-G5-MDCOMP-S 793811765199 The Strike Industries Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Current designs have largely been unchanged since the 1930s. It’s about time for something revolutionary. The Mass Driver name is inspired by the idea of theoretical mass driver engines in space travel. By ejecting mass, an equal and opposite reaction is generated propelling the space vehicle forward. The Mass Driver Compensator is driven by the hot gasses expelled through the barrel after the round is discharged, and acts as a counter balance system to attenuate mechanical recoil. Barrel mounted compensators add reciprocating mass and increase the moment of inertia to the operating system, which can have a negative effect on reliable cycling of recoil operated handguns. By separating the compensator from the operating components after ignition, the MDC allows for close to stock cyclic speeds, and reduces reciprocating mass. The compensator of the MDC system has a widened bore to reduce baffle strikes and keyholing rounds along with a 2.5mm relief cut at the top of the rear to reduce “lipping” and damage to the face of the pistol slide. NOTE: Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Package Contents: x1 Comp main body x1 Recoil spring x1 Guide rod x1 Guide rod fitment washer x1 Guide rod head x1 Internal spring x1 Warning card Product Features: No threaded barrel needed (but can be used) Eliminates the need for threaded barrels. 50 State Legal Widened bore to reduce baffle strikes and keyholing rounds 2.5mm relief cut at the top rear of comp to reduce "lipping" and damage to the face of the slide No permanent modification of weapon required Blended, no snag profile Matches with width of the slide, it can be used with open holsters, no special holster needed Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil Contours with slide dimensions to be compatible with most open-bottom holsters Precision CNC machined Threaded Barrels: Strike industries recommend use with non-threaded barrels if possible but yes, the Mass Driver Comp is compatible with most GLOCK™ aftermarket threaded barrels. They tested with majority of the popular brands on the market such as: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Grey Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies. NOTES: Designed for and tested on OEM GLOCK™ factory and Strike Industries slides SI cannot guarantee proper fitment and application on third party slides and frames Recommended torque value for guide rod nut is 25 lbs/in. Use with +P and +P+ 9mm ammo will produce premature internal spring wear and cause failure Loctite® Threadlocker Blue 242® on all threads Gunsmith or armorer installation recommended Product tested with factory GLOCK™ components Performance may vary when using third party compatible GLOCK™ components Consult with a local gunsmith for any custom modification while use with this product COMPATIBILITY: For GLOCK™ GEN3 OR GEN5 G19 (compact) & G17 (standard) SLIDES Holsters: SI Mass Driver Comp sits flush with OEM GLOCK™ slides and can be used in most open-ended holsters that accommodate compensators DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Specs:
Make: Glock
Model: 17, Gen 5
🔫 Upgrade your Glock 19 with the revolutionary Strike Industries G5 Mass Driver Comp! No threading needed, 50-state legal, and reduces recoil. Get yours now! 🛠️
Why order from us?
Welcome!
to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.
Whether you're looking to maintain, repair, or upgrade, we've got what you need!
For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.
Massive Selection
From the essentials to the unique, find everything under one roof.
Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.
Browse our collection and discover why we're the trusted name in shooting sports & hunting.
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK
Part of the Brownells Europe Group
Classical view
Mobile view
