The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
More...
Customer ratings for SINCLAIR INTERNATIONAL 20 CALIBER ROD GUIDE INSERT
Number of ratings: 6
From brownells.com: 6
Average rating: 2.7
17 Caliber Insert(14/12/2017)
Looking thru the guide you can see where it was drilled from each end. Drilling wandered and did not meet together perfectly, causing resistance when rod is slipped thru guide. Hopefully my cleaning rod does not contact throat area. I may return item using Sinclair's lifetime warranty.
Works great in GA Precision Templar LA(23/03/2015)
I confirmed that the 749-013-417 body and 749-013-422 guide insert was the perfect combo for my GA Precision Templar LA in .300 Win Mag. I've had this product for almost 3 years now and haven't had any big issues with it. Can't beat the value.
Poor Design & Quality(19/09/2012)
Insert is too long making it hard to use the port to apply solvent to patches, fit is very tight, not worth buying
Works great(28/12/2016)
I have used the Sinclair bore guide when cleaning my Rem 700 for over a year and am very happy with it. I have to remove my cheek riser before inserting the bore guide. But that's not a problem with the bore guide. I would recommend this bore guide.
It works but...(15/08/2018)
Brownells makes some stuff, but I don't think the two piece rod guide is one of them. It is not very user friendly, and makes cleaning more difficult than it should be. The two piece rod guide is also VERY long. I have a 36" rod, and it is not long enough to clean my rifle with a 26" barrel using this rod guide as is. I had to trim .5" off the end so that the patch would clear the end of the barrel. Brushes won't fully exit the barrel.
I prefer the Possum Hollow guide over these.
could not use(11/08/2012)
Good design, poor production. I bought the small body and inserts for 22 and 20 calibers. The 20 caliber would only fit about one inch into the body, the 22 insert about two inches. I had to have a machine shop turn the 20 caliber insert so I could clean a rifle. Had another rod guide for 22 so I just threw that one away.
Product no.: 749013419 SINCLAIR INTERNATIONAL 20 CALIBER ROD GUIDE INSERT Mfr Part: 1004102 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
The Sinclair Two-Piece Cleaning Rod Guides offer precise alignment of the cleaning rod with the bore using a dual-guide system.
Constructed from Delrin with rubber O-ring seals, these guides prevent solvent leakage and protect the rifle's rifling during cleaning.
Designed for specific cartridge fits, the guide body pairs with an insert tailored to the cleaning rod's diameter, ensuring a centered and flex-free rod movement.
Product no.: 749013417 SINCLAIR INTERNATIONAL BELTED MAGNUM BORE GUIDE BODY Mfr Part: 1004094 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
29.9GBP55£29.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 749013420 SINCLAIR INTERNATIONAL 22 CALIBER ROD GUIDE INSERT Mfr Part: 100410-3 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
33.9GBP44£33.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 749013414 SINCLAIR INTERNATIONAL 223 FAMILY BORE GUIDE BODY Mfr Part: 100409-1 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Product no.: 749013416 SINCLAIR INTERNATIONAL 308 FAMILY BORE GUIDE BODY Mfr Part: 1004093 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Product no.: 749013421 SINCLAIR INTERNATIONAL 6MM ROD GUIDE INSERT Mfr Part: 100410-4 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Product no.: 749013422 SINCLAIR INTERNATIONAL 270-30 CALIBER ROD GUIDE INSERT Mfr Part: 100410-5 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Product no.: 749013423 SINCLAIR INTERNATIONAL 35 CALIBER ROD GUIDE INSERT Mfr Part: 1004106 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
Product no.: 749013415 SINCLAIR INTERNATIONAL PPC BORE GUIDE BODY Mfr Part: 100409-2 The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
The Sinclair Two-Piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
More...
Customer ratings for SINCLAIR INTERNATIONAL 20 CALIBER ROD GUIDE INSERT
Number of ratings: 6
From brownells.com: 6
Average rating: 2.7
17 Caliber Insert(14/12/2017)
Looking thru the guide you can see where it was drilled from each end. Drilling wandered and did not meet together perfectly, causing resistance when rod is slipped thru guide. Hopefully my cleaning rod does not contact throat area. I may return item using Sinclair's lifetime warranty.
Works great in GA Precision Templar LA(23/03/2015)
I confirmed that the 749-013-417 body and 749-013-422 guide insert was the perfect combo for my GA Precision Templar LA in .300 Win Mag. I've had this product for almost 3 years now and haven't had any big issues with it. Can't beat the value.
Poor Design & Quality(19/09/2012)
Insert is too long making it hard to use the port to apply solvent to patches, fit is very tight, not worth buying
Works great(28/12/2016)
I have used the Sinclair bore guide when cleaning my Rem 700 for over a year and am very happy with it. I have to remove my cheek riser before inserting the bore guide. But that's not a problem with the bore guide. I would recommend this bore guide.
It works but...(15/08/2018)
Brownells makes some stuff, but I don't think the two piece rod guide is one of them. It is not very user friendly, and makes cleaning more difficult than it should be. The two piece rod guide is also VERY long. I have a 36" rod, and it is not long enough to clean my rifle with a 26" barrel using this rod guide as is. I had to trim .5" off the end so that the patch would clear the end of the barrel. Brushes won't fully exit the barrel.
I prefer the Possum Hollow guide over these.
could not use(11/08/2012)
Good design, poor production. I bought the small body and inserts for 22 and 20 calibers. The 20 caliber would only fit about one inch into the body, the 22 insert about two inches. I had to have a machine shop turn the 20 caliber insert so I could clean a rifle. Had another rod guide for 22 so I just threw that one away.