Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

REDDING
TITANIUM NITRIDE NECK BUSHINGS

611760763045 749003450
Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.

39.9 49.9 99 GBP
Product no.: 749003450
REDDING TITANIUM NITRIDE BUSHING/.304
Mfr Part: 76304 611760763045 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .304

Top takeaways

  1. Redding's Titanium Nitride Neck Bushings are heat treated steel bushings with a Titanium Nitride coating to increase hardness and reduce friction.
  2. The bushings are available in sizes from .185" through .368", in .001" increments.
  3. The product number's last three digits indicate the bushing size, with this particular bushing measuring .304" in diameter.

Attributes

Diameter (in): .304 Delivery weight: 0.045kg

Item details

Made in USA



Product no.: 749003288
REDDING TITANIUM NITRIDE BUSHING/.233
Mfr Part: 76233 611760762338 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .233
Product no.: 749003290
REDDING TITANIUM NITRIDE BUSHING/.235
Mfr Part: 76235 611760762352 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .235
Product no.: 749003293
REDDING TITANIUM NITRIDE BUSHING/.316
Mfr Part: 76316 611760763168 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .316
Product no.: 749003301
REDDING TITANIUM NITRIDE BUSHING/.315
Mfr Part: 76315 611760763151 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .315
Product no.: 749003390
REDDING TITANIUM NITRIDE BUSHING/.367
Mfr Part: 76367 611760763670 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .367
Product no.: 749003391
REDDING TITANIUM NITRIDE BUSHING/.368
Mfr Part: 76368 611760763687 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .368
Product no.: 749003392
REDDING TITANIUM NITRIDE BUSHING/.228
Mfr Part: 76228 611760762284 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .228
Product no.: 749003400
REDDING TITANIUM NITRIDE BUSHING/.255
Mfr Part: 76255 611760762550 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
39.9 GBP 7 £39.90 *
Delivery time approx. 7-14 days.
7 pcs. in the USA warehouse
Specs: Diameter (in): .255
Product no.: 749003401
REDDING TITANIUM NITRIDE BUSHING/.273
Mfr Part: 76273 611760762734 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .273
Product no.: 749003410
REDDING TITANIUM NITRIDE BUSHING/.300
Mfr Part: 76300 611760763007 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .300
Product no.: 749003411
REDDING TITANIUM NITRIDE BUSHING/.301
Mfr Part: 76301 611760763014 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .301
Product no.: 749003412
REDDING TITANIUM NITRIDE BUSHING/.313
Mfr Part: 76313 611760763137 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .313
Product no.: 749003413
REDDING TITANIUM NITRIDE BUSHING/.314
Mfr Part: 76314 611760763144 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .314
Product no.: 749003422
REDDING TITANIUM NITRIDE BUSHING/.361
Mfr Part: 76361 611760763618 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .361
Product no.: 749003423
REDDING TITANIUM NITRIDE BUSHING/.362
Mfr Part: 76362 611760763625 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .362
Product no.: 749003424
REDDING TITANIUM NITRIDE BUSHING/.363
Mfr Part: 76363 611760763632 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .363
Product no.: 749003425
REDDING TITANIUM NITRIDE BUSHING/.364
Mfr Part: 76364 611760763649 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .364
Product no.: 749003438
REDDING TITANIUM NITRIDE BUSHING/.366
Mfr Part: 76366 611760763663 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .366
Product no.: 749003441
REDDING TITANIUM NITRIDE BUSHING/.253
Mfr Part: 76253 611760762536 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .253
Product no.: 749003442
REDDING TITANIUM NITRIDE BUSHING/.256
Mfr Part: 76256 611760762567 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .256
Product no.: 749003443
REDDING TITANIUM NITRIDE BUSHING/.274
Mfr Part: 76274 611760762741 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .274
Product no.: 749003444
REDDING TITANIUM NITRIDE BUSHING/.280
Mfr Part: 76280 611760762802 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
39.9 GBP 1 £39.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .280
Product no.: 749003445
REDDING TITANIUM NITRIDE BUSHING/.281
Mfr Part: 76281 611760762819 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .281
Product no.: 749003446
REDDING TITANIUM NITRIDE BUSHING/.283
Mfr Part: 76283 611760762833 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .283
Product no.: 749003447
REDDING TITANIUM NITRIDE BUSHING/.284
Mfr Part: 76284 611760762840 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .284
Product no.: 749003448
REDDING TITANIUM NITRIDE BUSHING/.302
Mfr Part: 76302 611760763021 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .302
Product no.: 749003449
REDDING TITANIUM NITRIDE BUSHING/.303
Mfr Part: 76303 611760763038 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .303
Product no.: 749003451
REDDING TITANIUM NITRIDE BUSHING/.311
Mfr Part: 76311 611760763113 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .311
Product no.: 749003452
REDDING TITANIUM NITRIDE BUSHING/.312
Mfr Part: 76312 611760763120 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .312
Product no.: 749003453
REDDING TITANIUM NITRIDE BUSHING/.325
Mfr Part: 76325 611760763250 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .325
Product no.: 749003455
REDDING TITANIUM NITRIDE BUSHING/.365
Mfr Part: 76365 611760763656 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .365
Product no.: 749003461
REDDING TITANIUM NITRIDE BUSHING/.272
Mfr Part: 76272 611760762727 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .272
Product no.: 749003462
REDDING TITANIUM NITRIDE BUSHING/.282
Mfr Part: 76282 611760762826 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .282
Product no.: 749003463
REDDING TITANIUM NITRIDE BUSHING/.285
Mfr Part: 76285 611760762857 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .285
Product no.: 749003465
REDDING TITANIUM NITRIDE BUSHING/.305
Mfr Part: 76305 611760763052 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .305
Product no.: 749003467
REDDING TITANIUM NITRIDE BUSHING/.339
Mfr Part: 76339 611760763397 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 3 £49.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .339
Product no.: 749003469
REDDING TITANIUM NITRIDE BUSHING/.306
Mfr Part: 76306 611760763069 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .306
Product no.: 749003472
REDDING TITANIUM NITRIDE BUSHING/.226
Mfr Part: 76226 611760762260 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .226
Product no.: 749003474
REDDING TITANIUM NITRIDE BUSHING/.225
Mfr Part: 76225 611760762253 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .225
Product no.: 749003475
REDDING TITANIUM NITRIDE BUSHING/.251
Mfr Part: 76251 611760762512 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .251
Product no.: 749003476
REDDING TITANIUM NITRIDE BUSHING/.261
Mfr Part: 76261 611760762611 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .261
Product no.: 749003477
REDDING TITANIUM NITRIDE BUSHING/.262
Mfr Part: 76262 611760762628 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .262
Product no.: 749003478
REDDING TITANIUM NITRIDE BUSHING/.263
Mfr Part: 76263 611760762635 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .263
Product no.: 749003479
REDDING TITANIUM NITRIDE BUSHING/.271
Mfr Part: 76271 611760762710 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .271
Product no.: 749003480
REDDING TITANIUM NITRIDE BUSHING/.286
Mfr Part: 76286 611760762864 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .286
Product no.: 749003481
REDDING TITANIUM NITRIDE BUSHING/.287
Mfr Part: 76287 611760762871 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .287
Product no.: 749003482
REDDING TITANIUM NITRIDE BUSHING/.288
Mfr Part: 76288 611760762888 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .288
Product no.: 749003483
REDDING TITANIUM NITRIDE BUSHING/.289
Mfr Part: 76289 611760762895 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .289
Product no.: 749003484
REDDING TITANIUM NITRIDE BUSHING/.290
Mfr Part: 76290 611760762901 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 3 £49.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .290
Product no.: 749003485
REDDING TITANIUM NITRIDE BUSHING/.294
Mfr Part: 76294 611760762949 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .294
Product no.: 749003486
REDDING TITANIUM NITRIDE BUSHING/.308
Mfr Part: 76308 611760763083 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .308
Product no.: 749003487
REDDING TITANIUM NITRIDE BUSHING/.309
Mfr Part: 76309 611760763090 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .309
Product no.: 749003488
REDDING TITANIUM NITRIDE BUSHING/.310
Mfr Part: 76310 611760763106 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .310
Product no.: 749003489
REDDING TITANIUM NITRIDE BUSHING/.326
Mfr Part: 76326 611760763267 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .326
Product no.: 749003490
REDDING TITANIUM NITRIDE BUSHING/.328
Mfr Part: 76328 611760763281 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .328
Product no.: 749003491
REDDING TITANIUM NITRIDE BUSHING/.329
Mfr Part: 76329 611760763298 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .329
Product no.: 749003492
REDDING TITANIUM NITRIDE BUSHING/.338
Mfr Part: 76338 611760763380 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .338
Product no.: 749003497
REDDING TITANIUM NITRIDE BUSHING/.250
Mfr Part: 76250 611760762505 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .250
Product no.: 749003498
REDDING TITANIUM NITRIDE BUSHING/.260
Mfr Part: 76260 611760762604 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .260
Product no.: 749003499
REDDING TITANIUM NITRIDE BUSHING/.264
Mfr Part: 76264 611760762642 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .264
Product no.: 749003500
REDDING TITANIUM NITRIDE BUSHING/.265
Mfr Part: 76265 611760762659 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .265
Product no.: 749003501
REDDING TITANIUM NITRIDE BUSHING/.269
Mfr Part: 76269 611760762697 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .269
Product no.: 749003502
REDDING TITANIUM NITRIDE BUSHING/.270
Mfr Part: 76270 611760762703 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .270
Product no.: 749003503
REDDING TITANIUM NITRIDE BUSHING/.291
Mfr Part: 76291 611760762918 Redding Titanium Nitrite Bushing/.291
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .291
Product no.: 749003504
REDDING TITANIUM NITRIDE BUSHING/.292
Mfr Part: 76292 611760762925 Redding Titanium Nitrite Bushing/.292
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .292
Product no.: 749003505
REDDING TITANIUM NITRIDE BUSHING/.330
Mfr Part: 76330 611760763304 Redding Titanium Nitrite Bushing/.330
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .330
Product no.: 749003508
REDDING TITANIUM NITRIDE BUSHING/.247
Mfr Part: 76247 611760762475 Redding Titanium Nitrite Bushing/.247
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .247
Product no.: 749003509
REDDING TITANIUM NITRIDE BUSHING/.248
Mfr Part: 76248 611760762482 Redding Titanium Nitrite Bushing/.248
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .248
Product no.: 749003510
REDDING TITANIUM NITRIDE BUSHING/.249
Mfr Part: 76249 611760762499 Redding Titanium Nitrite Bushing/.249
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .249
Product no.: 749003511
REDDING TITANIUM NITRIDE BUSHING/.257
Mfr Part: 76257 611760762574 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .257
Product no.: 749003512
REDDING TITANIUM NITRIDE BUSHING/.266
Mfr Part: 76266 611760762666 Redding Titanium Nitrite Bushing/.266
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .266
Product no.: 749003513
REDDING TITANIUM NITRIDE BUSHING/.293
Mfr Part: 76293 611760762932 Redding Titanium Nitrite Bushing/.293
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .293
Product no.: 749003514
REDDING TITANIUM NITRIDE BUSHING/.331
Mfr Part: 76331 611760763311 Redding Titanium Nitrite Bushing/.331
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .331
Product no.: 749003515
REDDING TITANIUM NITRIDE BUSHING/.337
Mfr Part: 76337 611760763373 Redding Titanium Nitrite Bushing/.337
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .337
Product no.: 749003520
REDDING TITANIUM NITRIDE BUSHING/.259
Mfr Part: 76259 611760762598 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .259
Product no.: 749003525
REDDING TITANIUM NITRIDE BUSHING/.267
Mfr Part: 76267 611760762673 Redding Titanium Nitrite Bushing/.267
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .267
Product no.: 749003528
REDDING TITANIUM NITRIDE BUSHING/.245
Mfr Part: 76245 611760762451 Redding Titanium Nitrite Bushing/.245
49.9 GBP 4 £49.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .245
Product no.: 749003529
REDDING TITANIUM NITRIDE BUSHING/.246
Mfr Part: 76246 611760762468 Redding Titanium Nitrite Bushing/.246
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .246
Product no.: 749003530
REDDING TITANIUM NITRIDE BUSHING/.258
Mfr Part: 76258 611760762581 Redding Titanium Nitrite Bushing/.258
49.9 GBP 1 £49.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .258
Product no.: 749003531
REDDING TITANIUM NITRIDE BUSHING/.268
Mfr Part: 76268 611760762680 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 5 £49.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .268
Product no.: 749003533
REDDING TITANIUM NITRIDE BUSHING/.333
Mfr Part: 76333 611760763335 Redding Titanium Nitrite Bushing/.333
49.9 GBP 7 £49.90 *
Delivery time approx. 7-14 days.
7 pcs. in the USA warehouse
Specs: Diameter (in): .333
Product no.: 749003535
REDDING TITANIUM NITRIDE BUSHING/.335
Mfr Part: 76335 611760763359 Redding Titanium Nitrite Bushing/.335
49.9 GBP 6 £49.90 *
Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse
Specs: Diameter (in): .335
Product no.: 749003536
REDDING TITANIUM NITRIDE BUSHING/.336
Mfr Part: 76336 611760763366 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 3 £49.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .336
Product no.: 749003542
REDDING TITANIUM NITRIDE BUSHING/.327
Mfr Part: 76327 611760763274 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 2 £49.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .327
Product no.: 749003294
REDDING TITANIUM NITRIDE BUSHING/.317
Mfr Part: 76317 611760763175 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .317
Product no.: 749003414
REDDING TITANIUM NITRIDE BUSHING/.323
Mfr Part: 76323 611760763236 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .323
Product no.: 749003415
REDDING TITANIUM NITRIDE BUSHING/.324
Mfr Part: 76324 611760763243 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .324
Product no.: 749003439
REDDING TITANIUM NITRIDE BUSHING/.224
Mfr Part: 76224 611760762246 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .224
Product no.: 749003454
REDDING TITANIUM NITRIDE BUSHING/.341
Mfr Part: 76341 611760763410 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .341
Product no.: 749003460
REDDING TITANIUM NITRIDE BUSHING/.252
Mfr Part: 76252 611760762529 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .252
Product no.: 749003464
REDDING TITANIUM NITRIDE BUSHING/.295
Mfr Part: 76295 611760762956 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .295
Product no.: 749003466
REDDING TITANIUM NITRIDE BUSHING/.307
Mfr Part: 76307 611760763076 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .307
Product no.: 749003468
REDDING TITANIUM NITRIDE BUSHING/.340
Mfr Part: 76340 611760763403 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .340
Product no.: 749003496
REDDING TITANIUM NITRIDE BUSHING/.242
Mfr Part: 76242 611760762420 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .242
Product no.: 749003519
REDDING TITANIUM NITRIDE BUSHING/.243
Mfr Part: 76243 611760762437 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .243
Product no.: 749003527
REDDING TITANIUM NITRIDE BUSHING/.244
Mfr Part: 76244 611760762444 Redding Titanium Nitrite Bushing/.244
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .244
Product no.: 749003532
REDDING TITANIUM NITRIDE BUSHING/.332
Mfr Part: 76332 611760763328 Redding Titanium Nitrite Bushing/.332
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .332
Product no.: 749003534
REDDING TITANIUM NITRIDE BUSHING/.334
Mfr Part: 76334 611760763342 Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368
49.9 GBP 0 £49.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .334

🎯 Perfect your reloading with Redding Titanium Nitride Neck Bushings! Size .304 for precision. 🛠️ Durable, friction-reducing coating. Shop now! ✨

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.

Not available
 
5
Reordered
£27.90 * £24.90 - £28.90*
0
Reordered
£9.90 * £8.90 - £12.90*
0
Newsletter