Wilson Dies

Reordered

£27.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .293
NECK SIZING BUSHINGS

Hardened stainless steel neck bushing designed for precise sizing in .001” increments with a .003” taper for fine-tuning neck tension.
Specific to L.E. Wilson dies and not interchangeable with Forster or RCBS, with a unique feature allowing flipping for tighter sizing in emergencies.
To select the correct bushing size, subtract .002"-.003" from the loaded cartridge's outside neck diameter or calculate based on case neck wall thickness and bullet diameter.

Reordered

£27.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .330
NECK SIZING BUSHINGS

The L.E. Wilson Steel Neck Sizer Die Bushing is made of hardened stainless steel and comes in .001” increments, with a .003” taper for precise neck sizing.
It allows for adjustable tension by flipping the bushing; markings facing down provides a tighter fit for cases with hardened brass or for fine-tuning.
Compatible only with L.E. Wilson dies, it's not interchangeable with Forster or RCBS dies, and sizing can be determined by subtracting .002"-.003" from the loaded cartridge's outside neck diameter or case neck wall thickness calculation.

Reordered

£26.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .256
NECK SIZING BUSHINGS

The L.E. Wilson Steel Neck Sizer Die Bushing is made of hardened stainless steel and is designed to size the neck of a cartridge case with a .003” taper.
Bushings are marked with a size indicating the middle, but can be flipped for a tighter fit in emergency situations or for fine-tuning neck tension.
Compatible only with L.E. Wilson dies, not interchangeable with Forster or RCBS dies; selection of bushing size can be based on loaded cartridge outside neck diameter or case neck wall thickness calculations.

Reordered

£26.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .310
NECK SIZING BUSHINGS

Hardened stainless steel neck bushing from L.E. Wilson with a .003” taper for precise neck sizing in .001” increments.
Bushing can be inverted for emergency sizing adjustments or fine-tuning when brass becomes too hard or to alter neck tension slightly.
Compatible exclusively with L.E. Wilson dies and not interchangeable with Forster or RCBS dies; select size by subtracting .002" to .003" from either loaded cartridge outside neck diameter or calculated neck wall thickness plus bullet diameter.

In stock

£26.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .331
NECK SIZING BUSHINGS

Hardened stainless steel neck bushing from L.E. Wilson, with .310" diameter, is made in .001” increments and has a .003” taper for precise sizing.
Bushing can be flipped for emergency tighter sizing if brass hardens or for fine-tuning neck tension without stepping down to a smaller size.
Compatible exclusively with L.E. Wilson dies and not interchangeable with Forster or RCBS dies; select bushing size based on cartridge measurements or case neck wall thickness plus bullet diameter.

In stock

£27.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .284
NECK SIZING BUSHINGS

Hardened stainless steel neck bushing by L.E. Wilson with a .331" diameter, designed for precise neck sizing in .001” increments with a .003” taper.
Reversible bushing for emergency use or fine-tuning; marked side facing down achieves tighter sizing if brass becomes too springy or for less “squeeze” than the next smaller size.
Compatible only with L.E. Wilson dies, not interchangeable with Forster or RCBS dies; select size by subtracting .002"-.003" from the loaded cartridge's outside neck diameter or calculate using case neck wall thickness and bullet diameter.

In stock

£26.90 * £24.90 - £28.90*

L.E. WILSON STEEL NECK SIZER DIE BUSHING .325
NECK SIZING BUSHINGS

Hardened stainless steel neck bushing from L.E. Wilson, with .001” increments and a .003” taper for precise sizing adjustments.
Reversible bushing design allows for emergency use or fine-tuning by flipping it to tighten the sizing if brass has hardened or to adjust neck tension.
Compatible exclusively with L.E. Wilson dies and not interchangeable with Forster or RCBS dies; selection based on loaded cartridge or case neck wall thickness measurements.

In stock

£26.90 * £24.90 - £28.90*

SINCLAIR INTERNATIONAL 9/16"X3-1/2" PROTECTIVE TUBE (JAGS, BRUSHES)
PROTECTIVE TUBES

Hardened stainless steel neck bushing from L.E. Wilson designed in .001” increments with a .003” taper for precise sizing.
Bushing can be flipped for emergency tighter sizing or fine-tuning when brass hardens or to adjust neck tension.
Compatible with L.E. Wilson dies only, not interchangeable with Forster or RCBS dies; select bushings by subtracting .002" to .003" from either loaded cartridge neck diameter or case neck wall thickness times two plus bullet diameter.

SINCLAIR INTERNATIONAL

Reordered

£8.90 * £8.90 - £9.90*

Storage Boxes

The protective tubes are ideal for storing small items like parts, dummy rounds, and tools.
They are made of acrylic with a polyethylene cap and have an adjustable cardboard tube.
Specifically useful for storing L.E. Wilson Dies and can adjust in size from 3 inches to 5.5 inches.

SINCLAIR INTERNATIONAL 1-1/2" X 15" PROTECTIVE TUBE (LARGE ROD GUIDES)
PROTECTIVE TUBES

SINCLAIR INTERNATIONAL

Reordered

£9.90 * £8.90 - £9.90*

Storage Boxes

PROTECTIVE TUBES SINCLAIR INTERNATIONAL tubes are ideal for storing small parts, dummy rounds, and small tools.
The tubes are made of acrylic with a polyethylene cap and a cardboard tube that adjusts in size from 3" to 5.5".
They are specifically useful for storing L.E. Wilson Dies and other similar-sized items.

L.E. WILSON 308 WINCHESTER MICROMETER TOP BULLET SEATER
MICROMETER TOP BULLET SEATER DIES

In stock

£139.90 * £134.90 - £139.90*

L.E. WILSON 22-250 REMINGTON MICROMETER TOP BULLET SEATER
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die features a micrometer top with 0.001” increment scaling for precise bullet-seating depth adjustments.
Constructed from durable stainless steel, it is designed for the 308 Winchester cartridge and to be used with an Arbor Press.
Its portability allows reloaders to make adjustments at the range, potentially saving multiple trips by testing and adjusting seating depth on-site.

Reordered

£139.90 * £134.90 - £139.90*

L.E. WILSON 338 LAPUA MICROMETER TOP BULLET SEATER
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Dies offer precise bullet-seating with 0.001” increment adjustments.
Constructed from durable stainless steel, these dies require an Arbor Press for operation.
Designed for the 22-250 Remington cartridge, they allow for on-range adjustments, reducing the need for multiple range trips.

Reordered

£139.90 * £134.90 - £139.90*

L.E. WILSON 22-250 REMINGTON BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die offers precise bullet-seating with 0.001” increment adjustments using a durable stainless steel micrometer.
This tool is designed for major adjustments via a threaded cap, ensuring high accuracy for reloaders.
It is compatible with the 338 Lapua cartridge and can be used at the range with an Arbor Press for testing different seating depths.

In stock

£84.90 * £69.90 - £89.90*

L.E. WILSON 223 REMINGOTN BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The Wilson chamber type bullet seater ensures precise alignment of bullet and cartridge case for benchrest shooters.
It features a design where the case and bullet are fully captured before seating, leading to greater accuracy than conventional dies.
This bullet seater is highly regarded for its accuracy, making it one of the most precise bullet seaters available.

4.4

Reordered

£84.90 * £69.90 - £89.90*