Attributes
- Cartridge: -
- Style:
Pull-Thru Reamer Sets
- Delivery weight: 0.005kg
- Shipping width: 83mm
- Shipping length: 89mm
Product no.: 184300310
Mfr. No.: HSBUSH
The same special reamers military armorers have long used to cut minimum length chambers on match rifles, giving their shooters the accuracy advantage. The gun's own bolt applies pressure to the reamer while reamer is turned from the muzzle end. When the bolt "drops", the chamber is cut. Improved design cuts the shoulder, neck and throat to prevent neck crimping of the ammo. Use as a finish reamer ONLY. Cut chamber with conventional finish reamer first. Superb quality reamers made to SAAMI specifications.Delivery time approx. 7-14 days.
The PULL THROUGH CHAMBER REAMERS from CLYMER are designed to help you achieve precision like never before on your .30 caliber match rifles.
These special reamers have been trusted by military armorers for years to cut minimum length chambers on match rifles, providing shooters with a significant accuracy advantage. The reamer is operated from the muzzle end, with the gun's own bolt applying pressure as it turns. When the bolt "drops," the chamber is effectively cut.
Featuring an improved design, these reamers cut the shoulder, neck, and throat, which helps to prevent neck crimping of the ammunition. Please note that these reamers are intended for use as a finish reamer ONLY; it is essential to cut the chamber with a conventional finish reamer first.
Experience superb quality reamers made to SAAMI specifications and elevate your gunsmithing to the next level!
Pull-Thru Reamer Sets
Rod and T-handle different Diameters 30/01/2018
The rod shipped measures .267â outside diameter (not the .25â advertised) and the recommended T-handle has an inside diameter of .254â. Customer service said to send it back and they would send it to Clymer to sort out. Mean while I have barrels waiting to get finish reamed.
Great tool!!! 25/09/2017
I used this reamer to finish a short chambered M1 Garand barrel. It worked perfectly.
Not an issue for me as I have training on how to perform this task, but there were no instructions included. It had to be a fluke as I've never purchased any armorer tool from Brownell's that didn't come with instructions.
Patience, plenty of cutting oil and frequent checking are all recommended to prevent going too far. It doesn't take a whole lot of time for a short chamber as this tool cuts very well with minimum effort. I gauge checked and cleaned the tool and bore a number of times. In the end when the bolt closed on the final couple of turns the GO and NO GO gauges confirmed it was dead on spec.
I would definitely recommend this tool for the hobbyist and professional alike.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.