Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

050806009226 080451110
Hollow-Ground Radius Gives More Strength
We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way! THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set. SETS AVAILABLE We've packaged the Screwdrivers four ways: the Starter Set™ has the 10 Screwdrivers highlighted in gray in the chart below. The Completer Set™ adds the remaining 10 and turns a Starter Set™ into the Master Set™. The Master Set™ has all 20 Screwdrivers, plus the properly radiused Bit Shaping Stone, and a bottle of Brownells Best Penetrating Oil™. To create the The Super Master Set™ we took the Master Set and added 6 Allen head fixed blade screwdrivers and 3 Phillips "Anti-Cam" screwdrivers. NONE of the four sets include the Bench Block - It's sold as a separate item and makes a great addition to your set, now or later. As with all our tools and supplies, they are guaranteed to please you, the most demanding craftsman in the world - the working gunsmith.   

SPECS: 2½" (6.3cm) long shanks. 3¾" (9.5cm) long x 1"(2.5cm) dia. handle. Each screwdriver packed in individual plastic tube. Brownells Best Penetrating Oil included in each Set.

 

Stock #
Screwdriver #
Shank Dia.
Blade Thickness
#080-451-001
1
.120
.030
#080-451-002
2
.120
.040
#080-451-003
3
.150
.030
#080-451-004
4
.150
.040
#080-451-005
5
.180
.030
#080-451-006
6
.180
.040
#080-451-007
7
.210
.030
#080-451-008
8
.210
.040
#080-451-009
9
.240
.030
#080-451-010
10
.240
.040
#080-451-011
11
.270
.035
#080-451-012
12
.270
.045
#080-451-013
13
.300
.035
#080-451-014
14
.300
.045
#080-451-015
15
.300
.055
#080-451-016
16
.340
.040
#080-451-017
17
.340
.050
#080-451-018
18
.360
.040
#080-451-019
19
.360
.050
#080-451-020
20
.360
.060

 

154.9 419.9 4 GBP
Product no.: 080451110
BROWNELLS FIXED-BLADE SCREWDRIVER STARTER SET 050806009226 Fixed-Blade Screwdriver Starter Set?
154.9 GBP 0 £154.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Handle: Fixed Style: Set

Description

Fixed-Blade Screwdriver Starter Set?

Attributes

Handle: Fixed Style: Set Delivery weight: 1.383kg Shipping height: 150mm Shipping width: 180mm Shipping length: 208mm UPC : 050806009226

Item details

Made in USA



Product no.: 080451000
BROWNELLS FIXED-BLADE GUNSMITH'S SCREWDRIVER MASTER SET 050806009011 Fixed-Blade Gunsmith's Screwdriver Master Set?
289.9 GBP 0 £289.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Handle: Fixed Style: Set
Product no.: 080451210
BROWNELLS FIXED-BLADE SCREWDRIVER COMPLETE SET 050806009233 We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way! THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set. SETS AVAILABLE We've packaged the Screwdrivers four ways: the Starter Set™ has the 10 Screwdrivers highlighted in gray in the chart below. The Completer Set™ adds the remaining 10 and turns a Starter Set™ into the Master Set™. The Master Set™ has all 20 Screwdrivers, plus the properly radiused Bit Shaping Stone, and a bottle of Brownells Best Penetrating Oil™. To create the The Super Master Set™ we took the Master Set and added 6 Allen head fixed blade screwdrivers and 3 Phillips "Anti-Cam" screwdrivers. NONE of the four sets include the Bench Block - It's sold as a separate item and makes a great addition to your set, now or later. As with all our tools and supplies, they are guaranteed to please you, the most demanding craftsman in the world - the working gunsmith.
169.9 GBP 0 £169.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Handle: Fixed Style: Set
Product no.: 080454000
BROWNELLS FIXED-BLADE GUNSMITH'S SCREWDRIVER SUPER MASTER SET 050806009363 Fixed-Blade Gunsmith's Screwdriver Super Master Set
419.9 GBP 0 £419.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Handle: Fixed Style: Set

Discover the Brownells Fixed-Blade Screwdriver Starter Set 🔧, featuring durable handles and precision shanks for all your DIY needs!

Hollow-Ground Radius Gives More Strength
We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way! THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set. SETS AVAILABLE We've packaged the Screwdrivers four ways: the Starter Set™ has the 10 Screwdrivers highlighted in gray in the chart below. The Completer Set™ adds the remaining 10 and turns a Starter Set™ into the Master Set™. The Master Set™ has all 20 Screwdrivers, plus the properly radiused Bit Shaping Stone, and a bottle of Brownells Best Penetrating Oil™. To create the The Super Master Set™ we took the Master Set and added 6 Allen head fixed blade screwdrivers and 3 Phillips "Anti-Cam" screwdrivers. NONE of the four sets include the Bench Block - It's sold as a separate item and makes a great addition to your set, now or later. As with all our tools and supplies, they are guaranteed to please you, the most demanding craftsman in the world - the working gunsmith.   

SPECS: 2½" (6.3cm) long shanks. 3¾" (9.5cm) long x 1"(2.5cm) dia. handle. Each screwdriver packed in individual plastic tube. Brownells Best Penetrating Oil included in each Set.

 

Stock #
Screwdriver #
Shank Dia.
Blade Thickness
#080-451-001
1
.120
.030
#080-451-002
2
.120
.040
#080-451-003
3
.150
.030
#080-451-004
4
.150
.040
#080-451-005
5
.180
.030
#080-451-006
6
.180
.040
#080-451-007
7
.210
.030
#080-451-008
8
.210
.040
#080-451-009
9
.240
.030
#080-451-010
10
.240
.040
#080-451-011
11
.270
.035
#080-451-012
12
.270
.045
#080-451-013
13
.300
.035
#080-451-014
14
.300
.045
#080-451-015
15
.300
.055
#080-451-016
16
.340
.040
#080-451-017
17
.340
.050
#080-451-018
18
.360
.040
#080-451-019
19
.360
.050
#080-451-020
20
.360
.060

 

Back to top