With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
SPECS: Blued steel. Slotted head drive type. Kit contains 12 each of 20 screws, 240 total. Refills sold 12 per Pak. ½" = 12.7mm, 7/8" = 22.2mm, ¾" = 12.7mm 1" = 2.5cm.
More...
Customer ratings for BROWNELLS 5-44X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK
Number of ratings: 5
From brownells.com: 5
Average rating: 3.4
Good assortment(31/03/2010)
The selection in this set is great, it should cover most of what a gunsmith needs and the lengths seem to be sufficient for most applications. The filister heads are pretty tall, so I find them perfect for use in the cases where I have to turn and re-shape the heads to match original screws. However, the head diameters are a bit on the small side (I might be wrong, but they seem to be about the same size as Allen heads), so you can't use these in applications that require a larger head (like some grips, etc). It's still a good value, it's great to have an assortment like this at hand, instead of getting stuck right in the middle of a project because a certain screw is missing, and then pay $5 for one OEM screw.
It would be a perfect kit if the heads were larger and I would personally prefer untreated screws instead of black oxide, but I still give it an easy 4 stars. Of course, a metric kit would be great too...
everything but what I need(02/11/2010)
a lot of screws. price could be better. I went to attach a fore end to an encore muzzle loader and found I didn't have the right screws. "no problem" I thought, "I will just crack open that handy screw kit from brownells". LO and behold not a single one of them was big enough. This makes 3 out of 3 products i have gotten from brownells in the past couple months that has disappointed me. Seriously reconsidering my suppliers...
good to have on hand. Good buy .(29/01/2011)
I keep this kit in my shop and I use it all of the time. It can save your bacon if you lose a screw.
Good to have around.(18/03/2016)
I find the head just a little smaller than what normal guns use. But when you need a screw quickly and can't wait for one to come in, this fits the bill. I metric version of this would be nice, since there are a lot more metric guns out there now. Would give it five stars except for the size of the heads.
Not as pictured(14/10/2017)
The box shipped was some off brand and odd size that I have only seen in Lowes - not the small plastic box pictured. I have about 25 of the small plastic boxes in my shop for bits and pieces and the shelves are set up for this size. Had to go out and buy another box and make up the label, but otherwise great!
Quality screws, long enough for just about any use.
Product no.: 080050544 BROWNELLS 5-44X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: TP332-516050806012240 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
14.9GBP341£14.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The kit includes 12 each of 20 sizes of Fillister Head Screws, totaling 240 screws, suitable for various applications and customizable by cutting to shorter lengths.
These screws are designed with a slotted head drive type and are made of blued steel to prevent rusting, with a recommendation to use OXPHO-BLUE for additional rust protection and color after trimming.
Brownells offers this comprehensive screw kit, which provides a substantial savings and convenience over sourcing individual screws from specialized suppliers.
Product no.: 080050348 BROWNELLS 3-48X1" FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS348-1BO050806012196 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
Product no.: 080050448 BROWNELLS 4-48X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS448-1050806012226 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
Product no.: 080050836 BROWNELLS 8-36X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS836-1BO050806012288 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
Product no.: 080050032 BROWNELLS 10-32X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS1032-1BO050806012127 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
14.9GBP239£14.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080050256 BROWNELLS 2-56X1" FILLISTER HEAD SCREWS 12 PACK Mfr Part: NONE050806012172 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
13.9GBP805£13.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080050356 BROWNELLS 3-56X7/8" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS832-1BO050806012202 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
13.9GBP148£13.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080050440 BROWNELLS 4-40X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS836-1BO050806012219 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
13.9GBP386£13.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080050540 BROWNELLS 5-40X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK Mfr Part: FILMS540-1BO050806012233 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
14.9GBP228£14.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080000838 BROWNELLS 6-48X3/4" FILLISTER HEAD SCREW 12 PACK Mfr Part: FILMS648-34BO050806006805 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
13.9GBP703£13.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080050264 BROWNELLS 2-64X7/8" FILLISTER HEAD SCREWS 12 PACK050806012189 With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
With this kit you can stop searching for those hard-to-find screws that are stocked by only a few specialized manufacturing supply houses . . . we have done the looking for you. You can have that “just right” screw right at your fingertips, in a handy, very complete kit . . . and at quite a substantial savings. The kit contains 12 each of the 20 popular size screws from No. 0 wire gauge to No. 12 wire gauge in long enough lengths to fit many difficult jobs, yet they can be cut off and fitted where a shorter length is required.Slotted head drive type. We strongly suggest that after the screws are cut and trimmed, they be dipped in OXPHO-BLUE to give them a blue color as well as prevent rusting which could otherwise ruin a fine job.
SPECS: Blued steel. Slotted head drive type. Kit contains 12 each of 20 screws, 240 total. Refills sold 12 per Pak. ½" = 12.7mm, 7/8" = 22.2mm, ¾" = 12.7mm 1" = 2.5cm.
More...
Customer ratings for BROWNELLS 5-44X1" SLOTTED FILLISTER HEAD SCREWS 12 PACK
Number of ratings: 5
From brownells.com: 5
Average rating: 3.4
Good assortment(31/03/2010)
The selection in this set is great, it should cover most of what a gunsmith needs and the lengths seem to be sufficient for most applications. The filister heads are pretty tall, so I find them perfect for use in the cases where I have to turn and re-shape the heads to match original screws. However, the head diameters are a bit on the small side (I might be wrong, but they seem to be about the same size as Allen heads), so you can't use these in applications that require a larger head (like some grips, etc). It's still a good value, it's great to have an assortment like this at hand, instead of getting stuck right in the middle of a project because a certain screw is missing, and then pay $5 for one OEM screw.
It would be a perfect kit if the heads were larger and I would personally prefer untreated screws instead of black oxide, but I still give it an easy 4 stars. Of course, a metric kit would be great too...
everything but what I need(02/11/2010)
a lot of screws. price could be better. I went to attach a fore end to an encore muzzle loader and found I didn't have the right screws. "no problem" I thought, "I will just crack open that handy screw kit from brownells". LO and behold not a single one of them was big enough. This makes 3 out of 3 products i have gotten from brownells in the past couple months that has disappointed me. Seriously reconsidering my suppliers...
good to have on hand. Good buy .(29/01/2011)
I keep this kit in my shop and I use it all of the time. It can save your bacon if you lose a screw.
Good to have around.(18/03/2016)
I find the head just a little smaller than what normal guns use. But when you need a screw quickly and can't wait for one to come in, this fits the bill. I metric version of this would be nice, since there are a lot more metric guns out there now. Would give it five stars except for the size of the heads.
Not as pictured(14/10/2017)
The box shipped was some off brand and odd size that I have only seen in Lowes - not the small plastic box pictured. I have about 25 of the small plastic boxes in my shop for bits and pieces and the shelves are set up for this size. Had to go out and buy another box and make up the label, but otherwise great!
Quality screws, long enough for just about any use.