Help and contact
(0) Basket
Newsletter
LEE PRECISION
CLASSIC BULLET SIZING KIT
29.9
31.9
26
GBP
Product no.: 430108498
LEE PRECISION .266" CLASSIC BULLET SIZE KIT
Mfr Part: 92067 734307920678 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .266" CLASSIC BULLET SIZE KIT
Mfr Part: 92067 734307920678 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.266
Product no.: 100010171
LEE PRECISION 0.452" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90055 734307900557 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.452" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90055 734307900557 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.452
Product no.: 100010172
LEE PRECISION 0.457" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90057 734307900571 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.457" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90057 734307900571 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.457
Product no.: 100010173
LEE PRECISION 0.430" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90062 734307900625 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.430" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90062 734307900625 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.430
Product no.: 100100596
LEE PRECISION 0.356" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90046 734307900465 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.356" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90046 734307900465 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.356
Product no.: 100100597
LEE PRECISION 0.357" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90047 734307900472 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.357" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90047 734307900472 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.357
Product no.: 100100598
LEE PRECISION 0.358" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90048 734307900489 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.358" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90048 734307900489 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.358
Product no.: 100100600
LEE PRECISION 0.429" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90054 734307900540 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.429" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90054 734307900540 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.429
Product no.: 100100602
LEE PRECISION 0.401" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90060 734307900601 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.401" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90060 734307900601 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.401
Product no.: 100100603
LEE PRECISION 0.451" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90061 734307900618 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.451" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90061 734307900618 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.451
Product no.: 100053239
LEE PRECISION 0.224" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90049 734307900496 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.224" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90049 734307900496 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.224
Product no.: 100053245
LEE PRECISION 0.309" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90038 734307900380 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.309" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90038 734307900380 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.309
Product no.: 100053246
LEE PRECISION 0.311" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90039 734307900397 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.311" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90039 734307900397 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.311
Product no.: 100053244
LEE PRECISION 0.308" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90037 734307900373 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.308" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90037 734307900373 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.308
Product no.: 430108500
LEE PRECISION .255" CLASSIC BULLET SIZE KIT
Mfr Part: 90036 734307900366 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .255" CLASSIC BULLET SIZE KIT
Mfr Part: 90036 734307900366 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.255
Product no.: 430108501
LEE PRECISION .427" CLASSIC BULLET SIZE KIT
Mfr Part: 90053 734307900533 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .427" CLASSIC BULLET SIZE KIT
Mfr Part: 90053 734307900533 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.427
Product no.: 430108504
LEE PRECISION .243" CLASSIC BULLET SIZE KIT
Mfr Part: 90083 734307900830 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .243" CLASSIC BULLET SIZE KIT
Mfr Part: 90083 734307900830 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.243
Product no.: 430108495
LEE PRECISION .510" CLASSIC BULLET SIZE KIT
Mfr Part: 90188 734307901882 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .510" CLASSIC BULLET SIZE KIT
Mfr Part: 90188 734307901882 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.510
Product no.: 430108497
LEE PRECISION .323" CLASSIC BULLET SIZE KIT
Mfr Part: 90686 734307906863 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .323" CLASSIC BULLET SIZE KIT
Mfr Part: 90686 734307906863 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.323
Product no.: 430108502
LEE PRECISION .329" CLASSIC BULLET SIZE KIT
Mfr Part: 90934 734307909345 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .329" CLASSIC BULLET SIZE KIT
Mfr Part: 90934 734307909345 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.329
Product no.: 430108496
LEE PRECISION .459" CLASSIC BULLET SIZE KIT
Mfr Part: 91672 734307916725 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .459" CLASSIC BULLET SIZE KIT
Mfr Part: 91672 734307916725 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.459
Product no.: 430108494
LEE PRECISION .458" CLASSIC BULLET SIZE KIT
Mfr Part: 91682 734307916824 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .458" CLASSIC BULLET SIZE KIT
Mfr Part: 91682 734307916824 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.458
Product no.: 430108505
LEE PRECISION .460" CLASSIC BULLET SIZE KIT
Mfr Part: 91829 734307918293 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .460" CLASSIC BULLET SIZE KIT
Mfr Part: 91829 734307918293 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.460
Product no.: 430108499
LEE PRECISION .376" CLASSIC BULLET SIZE KIT
Mfr Part: 91856 734307918569 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .376" CLASSIC BULLET SIZE KIT
Mfr Part: 91856 734307918569 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.376
Product no.: 100053247
LEE PRECISION 0.314" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90044 734307900441 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION 0.314" DIAMETER CLASSIC BULLET SIZING KIT
Mfr Part: 90044 734307900441 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.314
Product no.: 430108503
LEE PRECISION .285" CLASSIC BULLET SIZE KIT
Mfr Part: 90171 734307901714 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
LEE PRECISION .285" CLASSIC BULLET SIZE KIT
Mfr Part: 90171 734307901714 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.
Specs:
Diameter (in): 0.285
Size your cast bullets easily with the LEE Precision .266" Classic Bullet Sizing Kit! 🎯 Perfect for single stage presses.
In stock
£11.90
£9.90 - £12.90
In stock
£11.90
£11.90 - £16.90
Classical view
Mobile view