Attributes
- Diameter (in):
0.358
- Delivery weight: 0.318kg
- Shipping height: 142mm
- Shipping width: 84mm
- Shipping length: 84mm
- UPC: 734307900489
Product no.: 100100598
Mfr. No.: 90048
734307900489 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.Delivery time approx. 7-14 days.
Introducing the CLASSIC BULLET SIZING KIT by LEE PRECISION, designed to streamline the bullet sizing process for enthusiasts and professionals alike.
Special Note: This kit is intended for use on single stage presses only. The push through punch replaces a shell holder in the ram, and a top punch is not necessary when using this kit.
To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox. Then, push a gas check onto the base of the bullet and set it on the punch. As the bullet is pushed through the sizing die, it will be sized and the gas check crimped on.
For optimal results with cast bullets, choose a sizing kit that is .001" larger than the groove diameter.
0.358
45 sizer 20/12/2013
I inherited a few thousand 45 bullets, lead, various weights, designs and mfgs, and most would not fit. Rather than melt them down and start over, I bought one of these in .452. Still haven't shot all, but after sizing, I've had no trouble in revolver or auto. Fine accuracy from 200 gr through 230.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.