Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
More...
Customer ratings for REDDING 6.5 CREEDMOOR BODY DIE
Number of ratings: 5
From brownells.com: 5
Average rating: 5
Works great(22/05/2011)
I was originally looking for a Redding full length die with a bushing sizer for the neck, this die is a great alternative and lets me bump the shoulder back in a standard 7mm IHMSA chambering.
Addendum (15/04/2017)
Sorry didn't want to mislead anyone . Polishing the expander to .3065 will give a 2 thousands neck tension . If you polish to .3075 equals 1 thousands neck tension .
Simply works(15/04/2017)
I use these in every caliber of rifle I own. I bump the shoulders back with the Redding dies then size the necks with a lee collet die . Then use a k&m expander mandrel / Sinclair works too that I polish down to .3065 .this expands so I have one thousands neck tension . Then seat the bullets using LE Wilson seater die . Using LAPUA brass and match bullets my TIR is always less then 1 thousands . So runout is less the 1/2 thousands.i know bushing dies work for others but to be honest I've never needed to try that route .
This is an awesome body die from Redding(21/04/2018)
I like this body die so much I bought several for different rifles. They are easy to set up, accurate, and repeatable. I am able to minimally size the body and bump the shoulder .002 with ease. The only thing I don't like is the free shipping method used. It is shipped via UPS then handed off to the post office for delivery. SLOW.
Would recommend this product(18/08/2012)
I use this die to set the shoulder back when my loaded ammo wont allow the bolt (AR) to close on the case, due to growing headspace. Great product when you have a tight chamber (Wylde)in a .223. Loaded 225 rounds and found out the shouilder needed to be pushed back. A quick trip thru a Redding body die and I was good to go.
Product no.: 749003788 REDDING 6.5X55MM SWEDISH MAUSER BODY DIE Mfr Part: 75132611760751325 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003790 REDDING 7MM REMINGTON MAGNUM BODY DIE Mfr Part: 75136611760751363 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003791 REDDING 30-06 SPRINGFIELD BODY DIE Mfr Part: 75148611760751486 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003797 REDDING 300 WSM BODY DIE Mfr Part: 75223611760752230 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003803 REDDING 300 WINCHESTER MAGNUM BODY DIE Mfr Part: 75153611760751530 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003808 REDDING 22-250 REMINGTON BODY DIE Mfr Part: 75106611760751066 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003815 REDDING 223 REMINGTON BODY DIE Mfr Part: 75111611760751110 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749010749 REDDING 6MM DASHER BODY DIE Mfr Part: 75648611760756481 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 100011711 REDDING 330 DAKOTA BODY DIE Mfr Part: 75803611760750007 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749015876 REDDING 28 NOSLER BODY DIE Mfr Part: 75790611760757907 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749018633 REDDING 6.5 PRC BODY DIE Mfr Part: 75487611760754876 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749019256 REDDING 300 PRC BODY DIE Mfr Part: 75776611760757761 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749003794 REDDING 222 REMINGTON BODY DIE Mfr Part: 75109611760751097 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749004481 REDDING BODY DIE 7MM REM SAUM Mfr Part: 75280611760752803 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749005226 REDDING BODY DIE 30 BR Mfr Part: 75524611760755248 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749005221 REDDING BODY DIE 7MM IHMSA Mfr Part: 75240611760752407 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749004477 REDDING BODY DIE 17 REM Mfr Part: 75217611760752179 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Product no.: 749018632 REDDING 224 VALKYRIE BODY DIE Mfr Part: 75387611760753879 Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set.
More...
Customer ratings for REDDING 6.5 CREEDMOOR BODY DIE
Number of ratings: 5
From brownells.com: 5
Average rating: 5
Works great(22/05/2011)
I was originally looking for a Redding full length die with a bushing sizer for the neck, this die is a great alternative and lets me bump the shoulder back in a standard 7mm IHMSA chambering.
Addendum (15/04/2017)
Sorry didn't want to mislead anyone . Polishing the expander to .3065 will give a 2 thousands neck tension . If you polish to .3075 equals 1 thousands neck tension .
Simply works(15/04/2017)
I use these in every caliber of rifle I own. I bump the shoulders back with the Redding dies then size the necks with a lee collet die . Then use a k&m expander mandrel / Sinclair works too that I polish down to .3065 .this expands so I have one thousands neck tension . Then seat the bullets using LE Wilson seater die . Using LAPUA brass and match bullets my TIR is always less then 1 thousands . So runout is less the 1/2 thousands.i know bushing dies work for others but to be honest I've never needed to try that route .
This is an awesome body die from Redding(21/04/2018)
I like this body die so much I bought several for different rifles. They are easy to set up, accurate, and repeatable. I am able to minimally size the body and bump the shoulder .002 with ease. The only thing I don't like is the free shipping method used. It is shipped via UPS then handed off to the post office for delivery. SLOW.
Would recommend this product(18/08/2012)
I use this die to set the shoulder back when my loaded ammo wont allow the bolt (AR) to close on the case, due to growing headspace. Great product when you have a tight chamber (Wylde)in a .223. Loaded 225 rounds and found out the shouilder needed to be pushed back. A quick trip thru a Redding body die and I was good to go.