My Account
(Sign in)

Your basket is empty.

Basket

01788 815115

Newsletter

MAGPUL AR-15/16 PMAG RANGER® FLOORPLATE 3 PACK

PMAG Ranger Floorplate, Black, 3-Pak

Product no.: 100003501 873750001906 100003501

Description
Ratings (14)

Fast, Easy Mag Changes In High Stress Situations

Replacement floorplate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round PMAGs for fast, secure tactical magazine changes. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer overmolded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks and available in Black, Dark Earth, and O.D. Green.

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

More...

Customer ratings for PMAG Ranger Floorplate, Black, 3-Pak

Number of ratings: 14
From brownells.com: 14
Average rating: 4.8

Typical MAGPUL Quality (14/01/2010)

Easy to install and gives you a little something extra to grab

Easy access (09/12/2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01/12/2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09/09/2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11/09/2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02/10/2009)

The Magpul PMAG Ranger plates are a quick an effective solution for not only protecting your mags but also making them more effective. The angle on the bottom of the Ranger plate puts you at nearly the perfect angle for shooting while proned out on the ground. The loop also increases speed of mag exchanges and makes ripping the mag much smoother. I use them on all of my mags!

Should be standard equipment (17/11/2009)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (06/12/2010)

These worked great. Easy to install.

saves your mag if you drop em a lot (08/08/2011)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (27/05/2013)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (29/01/2016)

These fit perfectly on the Gen 3 magazines. It actually takes 5 seconds to remove floor plate and install the Ranger plate (unless you let the spring escape). My shooting days with the M16 goes back to the late 1960's and continue thru the present. The MagPul Gen3 with Ranger plate is great.

Correction (13/07/2016)

This is the correct floor plate for the Gen 2 PMAG and won't fit on the Gen 3 Magazine. (Model # MAG561 is the Gen 3 PMAG plate.) It takes all of 5 seconds (unless you let the spring escape) to remove the original plate and install this one. In addition to all the speed elements, this allows for effortless removal of magazines from tightly packed pouches of all types. It is well worth it to equip all your Gen 2 PMAGs with this plate.

Awesome Product (24/09/2017)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (03/03/2018)

Itâs a good solid product, but I bought these for some 10 round hunting mags and they donât fit. They work just fine on my 30 and 40 round mags. The way the 10 rounders are molded at the rail for the base plate doesnât line up with the Rangers and the way theyâre molded at the rail. I didnât see anywhere clearly stating they would not work with 10 round Pmags, and these are the 3rd Gen mags too. If I missed it, my fault, but it is certainly not clearly stated anywhere obvious. For that reason this product gets 4/5 stars. If youâre buying them for bigger mags, you should consider this a 5/5.

Disappointed and considering returning them as they arenât working out for what I wanted them for, but Iâll probably just put them on some 40 round mags.

Read 14 more ratings on brownells.com

16.1 16.1 1 GBP

100003501
PMAG Ranger Floorplate, Black, 3-Pak
Mfr Part: MAG212BLK 873750001906 Replacement floorplate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round PMAGs for fast, secure tactical magazine changes. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer overmolded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks and available in Black, Dark Earth, and O.D. Green.

16.1 GBP 0 £16.10 *

Notify on availability

Out of stock, backorder available

Specs: Color: Black Make: AR-15

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Attributes

Color: Black Make: AR-15

Item details

Made in USA
US export classification: I(h)

Description
Ratings (14)

Fast, Easy Mag Changes In High Stress Situations

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

More...

Customer ratings for PMAG Ranger Floorplate, Black, 3-Pak

Number of ratings: 14
From brownells.com: 14
Average rating: 4.8

Typical MAGPUL Quality (14/01/2010)

Easy to install and gives you a little something extra to grab

Easy access (09/12/2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01/12/2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09/09/2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11/09/2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02/10/2009)

Should be standard equipment (17/11/2009)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (06/12/2010)

These worked great. Easy to install.

saves your mag if you drop em a lot (08/08/2011)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (27/05/2013)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (29/01/2016)

Correction (13/07/2016)

Awesome Product (24/09/2017)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (03/03/2018)

Read 14 more ratings on brownells.com

Customers also bought

AR-15 PMAG GEN M3 Magazine 223/5.56 30rd Polymer Black 1pk
AR-15 30RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£18.85 * £18.75 - £1,814.55*

Magazines

4.1 (20)

Sale

AR-15 PMAG GEN M3 Magazine 223/5.56 30rd Polymer Black 1pk
AR-15 30RD PMAG GEN M3 WINDOW MAGAZINE 223/5.56

MAGPUL

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£22.15 * £21.95 - £2,150.75*

(Select Items on Sale!)

Old price £23.65

Magazines

5 (5)

AR-15 PMAG GEN M3 Magazine 223/5.56 20rd Polymer Black 1pk
AR-15 20RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£19.90 * £19.90 - £193.10*

Magazines

5 (4)

AR-15 PMAG Gen M2 MOE Mag 223/5.56 30rd Polymer Blk
AR-15 30RD PMAG GEN M2 MOE MAGAZINE 223/5.56

MAGPUL

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£16.10 * £16.10 - £1,755.65*

Magazines

4.8 (64)

Enhanced Recoil Pad
AR-15/M16 TACTICAL RECOIL PADS

MAGPUL

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£20.45 * £20.10 - £20.45*

Rifle

5 (5)

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations:

Prices inclusive of duty & VAT.

Classical view

Mobile view