Attributes
- Model:
Commander
,Government
,Officers
- Weapon type:
1911
- Delivery weight: 0.068kg
- Shipping height: 10mm
- Shipping width: 79mm
- Shipping length: 145mm
- UPC: 050806020207
Product no.: 080745120
050806020207 Surface ground and hardened tool steel bars in ten thicknesses - Recommended by agency armorers and top pistolsmiths as the most accurate way to remove vertical slide “play” from the 1911 Auto, its variations and copies. May be slower than the quick-and-dirty methods, but gives an infinitely more accurate and professional job. Basic procedure as follows: Measure gun’s slide rail thickness; place closest-sized Slide Fitting Bar in frame “way”; tap frame rail with light hammer to close the “ways” space down to match the slide rail thickness. Complete instructions included.Delivery time approx. 7-14 days.
The 1911 Slide Fitting Bars from BROWNELLS are essential tools for any serious gunsmith or firearm enthusiast looking to remove slide "play" accurately and professionally. Designed specifically for the 1911 Auto and its variations, these surface ground and hardened tool steel bars are recommended by agency armorers and top pistolsmiths.
While this method may take more time than quick-and-dirty techniques, it provides a far more accurate and professional outcome. The basic procedure involves measuring the gun’s slide rail thickness, placing the closest-sized Slide Fitting Bar in the frame “way”, and tapping the frame rail with a light hammer to align the “ways” space with the slide rail thickness.
Upgrade your gunsmithing tools with the 1911 Slide Fitting Bars from BROWNELLS and ensure your firearm operates with the utmost precision.
Commander,
Government,
Officers
1911
Work well, IF you know what your doing 15/02/2015
I've used these extensively to lower frame rails on 1911's. They work, BUT It requires patience and proper setup and tooling. Your frame has to be well supported with an aluminum mag well spacer and locked up in some type of non marring vice. As for peening the rails, A well polished tip on a wide punch can do the job but for a truly professional look I suggest you invest in the speciality peening wedges made just for this. If you decide to use a ball peen hammer, make sure the surface on the flat side is mirror polished. If you do the above, take your time you'll do fine.
nice 28/10/2010
These are tools for the professional; well made, precision ground and essential for propper fit. if you know what you are doing, these are the cats meow.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.