The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
More...
Customer ratings for SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Maximize bench space(27/07/2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02/05/2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.
🎯 Upgrade your reloading setup with the SINCLAIR INTERNATIONAL Wooden Press Stand! 🌟 Perfect for precision reloading. Get started now and enhance your experience! 🔧
The Sinclair wooden reloading press stand is designed to hold 7/8 inch to fourteen reloading presses for field/range use or for home use when permanent mounting isn't an option. Great for load testing at the range. The stand is constructed of solid birch plywood and reinforced with aluminum angles for structural support. The large footprint provides a stable base when clamped down with a c-clamp. Press stands are shipped completely assembled. Designed to accomodate the following presses: RCBS Rockchucker, Redding Boss and Big Boss, Hornady 007 presses, and similar sized presses. User must mark and drill mounting holes in top plate with normal drill bit. Mounting bolts are not included as we don't know what hole size you need for your press. The mounting plate has a drillable mounting surface of four and one half inch wide by five and one half inch deep.
More...
Customer ratings for SINCLAIR INTERNATIONAL SINCLAIR WOODEN PRESS STAND
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Maximize bench space(27/07/2011)
This stand maximizes bench space, allowing me to use both rifle and shotgun presses as well as a powder measure on the same tabletop. All of these are mounted on wooden bases. Also, having the press elevated is more comfortable. Extra tall presses can be accommodated by adding additional plywood on top of the stand.
Extreme Reloading (02/05/2015)
I have a Rock Chucker Supreme (RC IV) and it barely fits the stand. There's about 1mm of space left between the press base and the washers. The wooden stand that I received didn't have the hi-gloss finish as pictured, but has a dull sheen. Also, the arm on the press will hit the wooden base before the ram bottom out on the first notch, so you'll have to use the second notch, which tilts the wooden base 45 degrees for awkward reloading.