Provides A Factory Quality Fit With Hardly Any Work
Classic, American Walnut forends are sanded and given a three-coat, Danish oil finish to provide excellent weather resistance and durability. Quality, straight-grained wood looks sharp and is easy to touch up if the forend is nicked or dinged.
SPECS: Walnut, straight grain, no figure. Accepts original hardware. Matches factory length of pull. Browning A-5 forend fits 12 gauge, 5-shot. Remington 11 forend is 12 gauge only; drilled for the detent & spring. Do not come pre drilled.
More...
Customer ratings for WOOD PLUS FOREND FITS REM. 11, 12 GA.
Number of ratings: 3
From brownells.com: 2
Average rating: 2
horrible quaility (10/09/2014)
center-line of dimensions of this stock are so far off extensive modification is needed to create proper clearance for the recoil operating parts to function correctly.
Poor Quality(17/01/2017)
This forend is very poor quality. I was in a time crunch so I did not return it. The wood is machined off center. The left side is much thicker than the right. It looks like the raw material was oversize. Then it was put in the jig for machining, all the extra material was pushed to the left. Probably the jig was loaded from the left and clamped from the left so all the extra material ended up on the left. Had to machine away extra wood so the forend would fit in the receiver. Because of the off center machining, the forend matches the receiver width on the right but hangs out wider on the left. Ugly.
Had to machine the groove for the barrel so the forend does not hit the barrel.
Requires fitting, rather plain, but a decent replacement forend.(30/01/2016)
This comes with a plastic fitting that the barrel ring sits against which prevents it from damaging the wood itself when returning forward. It requires fitting to your gun, and you need to be careful doing so as it is still vulnerable to splitting at the rear end.
🔫 Upgrade your Remington with a high-quality Walnut Forend from Wood Plus! Fits Rem. 11, 12 GA. Perfect match for your shotgun's look & feel. Shop now! 🌟
Provides A Factory Quality Fit With Hardly Any Work
Classic, American Walnut forends are sanded and given a three-coat, Danish oil finish to provide excellent weather resistance and durability. Quality, straight-grained wood looks sharp and is easy to touch up if the forend is nicked or dinged.
SPECS: Walnut, straight grain, no figure. Accepts original hardware. Matches factory length of pull. Browning A-5 forend fits 12 gauge, 5-shot. Remington 11 forend is 12 gauge only; drilled for the detent & spring. Do not come pre drilled.
More...
Customer ratings for WOOD PLUS FOREND FITS REM. 11, 12 GA.
Number of ratings: 3
From brownells.com: 2
Average rating: 2
horrible quaility (10/09/2014)
center-line of dimensions of this stock are so far off extensive modification is needed to create proper clearance for the recoil operating parts to function correctly.
Poor Quality(17/01/2017)
This forend is very poor quality. I was in a time crunch so I did not return it. The wood is machined off center. The left side is much thicker than the right. It looks like the raw material was oversize. Then it was put in the jig for machining, all the extra material was pushed to the left. Probably the jig was loaded from the left and clamped from the left so all the extra material ended up on the left. Had to machine away extra wood so the forend would fit in the receiver. Because of the off center machining, the forend matches the receiver width on the right but hangs out wider on the left. Ugly.
Had to machine the groove for the barrel so the forend does not hit the barrel.
Requires fitting, rather plain, but a decent replacement forend.(30/01/2016)
This comes with a plastic fitting that the barrel ring sits against which prevents it from damaging the wood itself when returning forward. It requires fitting to your gun, and you need to be careful doing so as it is still vulnerable to splitting at the rear end.