Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

EGW
MONTANA RIFLE 1999 SHORT ACTION HD SCOPE BASES

296000604
Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 3.65" Overall Length of Mount: 6.670" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
94.9 94.9 2 GBP
Product no.: 296000604
EGW MONTANA RIFLE 1999 SHORT ACTION HD SCOPE BASE 0 MOA
Mfr Part: 81100 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 3.65" Overall Length of Mount: 6.670" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
94.9 GBP 0 £94.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Action Type: Short Color: Matte Black Elevation: 0 MOA Make: Montana Rifle Co. Material: Aluminum Model: 1999 Number of Bases: 1-Piece Style: Picatinny Rail

Top takeaways

  1. The scope base is precision machined from solid 7075 T6 aircraft grade aluminum, ensuring durability and compatibility with Picatinny or Weaver scope rings.
  2. Features include a matte black finish, full-length Picatinny cross slots, and comes with #6-48 X 1/4 screws and a T-10 bit for installation.
  3. Designed and manufactured in the USA by EGW, the scope base is 0 MOA and is compatible with Montana Rifle Co. 1999 short action models.

Attributes

Action Type: Short Colour: Matte Black Elevation: 0 MOA Make: Montana Rifle Co. Material: Aluminum Model: 1999 Number of Bases: 1-Piece Style: Picatinny Rail Delivery weight: 0.227kg Shipping height: 25mm Shipping width: 102mm Shipping length: 229mm

Item details

Made in USA




Product no.: 296000605
EGW MONTANA RIFLE 1999 SHORT ACTION HD SCOPE BASE 20 MOA
Mfr Part: 81102 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 3.65" Overall Length of Mount: 6.670" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
94.9 GBP 0 £94.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Action Type: Short Color: Matte Black Elevation: 20 MOA Make: Montana Rifle Co. Material: Aluminum Model: 1999 Number of Bases: 1-Piece Style: Picatinny Rail

Top takeaways

  1. Made from solid 7075 T6 aircraft-grade aluminum with a matte black finish, compatible with Picatinny or Weaver scope rings.
  2. Includes #6-48 X 1/4 screws, T-10 bit, and features a center spread of 3.65", with a bevel on both sides for ambidextrous use.
  3. Designed for Montana Rifle Co. 1999 model with a short action type and a 20 MOA elevation, manufactured by EGW in the USA.

Attributes

Action Type: Short Colour: Matte Black Elevation: 20 MOA Make: Montana Rifle Co. Material: Aluminum Model: 1999 Number of Bases: 1-Piece Style: Picatinny Rail Delivery weight: 0.093kg Shipping height: 19mm Shipping width: 89mm Shipping length: 229mm

Item details

Made in USA

Upgrade your Montana Rifle 1999 with our HD Scope Bases! Durable aluminum, matte black finish, and compatible with Picatinny rings. 🔭

Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 3.65" Overall Length of Mount: 6.670" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Back to top