Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.045" Overall Length of Mount: 7.458" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
More...
94.994.92GBP
Product no.: 296000606 EGW MONTANA RIFLE 1999 LONG ACTION HD SCOPE BASE 0 MOA Mfr Part: 81110841370117222 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.045" Overall Length of Mount: 7.458" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The scope base is precision machined from 7075 T6 aircraft grade aluminum, finished in matte black, and is compatible with both Picatinny and Weaver scope rings.
Features include a full-length Picatinny rail, a 0 MOA elevation, and it comes with mounting hardware and instructions for installation, ensuring flexibility and ease of use.
Manufactured in the USA by EGW, the scope base is designed for the Montana Rifle Co. 1999 Long Action with a durable hard coat anodized finish for longevity.
Attributes
Action Type:
Long
Colour:
Matte Black
Elevation:
0 MOA
Make:
Montana Rifle Co.
Material:
Aluminum
Model:
1999
Number of Bases:
1-Piece
Style:
Picatinny Rail
Delivery weight: 0.227kg
Item details
Made in USA
Product no.: 296000607 EGW MONTANA RIFLE 1999 LONG ACTION HD SCOPE BASE 20 MOA Mfr Part: 81112841370117239 Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.045" Overall Length of Mount: 7.458" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The scope base is precision machined from 7075 T6 aircraft-grade aluminum, ensuring durability and compatibility with Picatinny or Weaver scope rings.
Features a 20 MOA elevation, with full-length Picatinny cross slots for flexible accessory mounting, and comes with mounting hardware.
Designed and manufactured in the USA by EGW, the base is finished with a hard coat anodized for longevity and is compatible with Montana Rifle Co. Model 1999 Long Action.
Attributes
Action Type:
Long
Colour:
Matte Black
Elevation:
20 MOA
Make:
Montana Rifle Co.
Material:
Aluminum
Model:
1999
Number of Bases:
1-Piece
Style:
Picatinny Rail
Delivery weight: 0.104kg
Item details
Made in USA
🎯 Enhance your long-range shooting with the EGW Montana Rifle 1999 Long Action HD Scope Base! Precision machined, matte black finish, and full Picatinny compatibility. 🛒 Get yours now!
Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.045" Overall Length of Mount: 7.458" This mount comes standard with a bevel on both sides making it ambidextrous. *The center spread is the distance between the two middle holes, center to center, on your receiver. These bases sit at approximately 0.35” high. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002". After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish. Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package! From manufacturing to packaging, EGW’s products are made with pride in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).