28,000 PSI-Flows At 475\ F. The Best All-Round Solder For Gunsmithing
Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
Customer ratings for BROWNELLS HI-FORCE 44™ SOLDER 1LB WIRE
Number of ratings: 1
From brownells.com: 1
Average rating: 4
reattaching ribs(24/05/2012)
The only thing that could improve this is offering it slightly wider. I run it through the rolling mill about 1/2 the time to get it a little wider. This and the Comet flux has made this job far easier than I thought possible - sort of no sweat sweating. Be ready to snug up the jig as it flows and give the part plenty of time too cool before loosening.
Product no.: 080649100 BROWNELLS HI-FORCE 44™ SOLDER 1LB WIRE Mfr Part: 1380620196 Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
Brownells Hi-Force 44 Solder is a non-toxic alloy with 4% silver, ideal for joining steel, stainless steel, nickel, brass, and copper.
It melts and flows at approximately 475° F, providing a strong bond with 14,000 to 28,000 PSI tensile strength without the need for oxyacetylene setups.
The solder is resistant to black oxide formation and can withstand immersion in hot bluing tanks without damage to the joint.
Product no.: 080649325 BROWNELLS HI-FORCE 44™ SOLDER 1/4LB RIBBON Mfr Part: NONE Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
🔥 Get the ultimate bond with BROWNELLS HI-FORCE 44™ Solder! Ideal for metals, this 1lb wire solder flows smoothly at 475°F. No toxic fumes, high PSI strength. Shop now! 💪🛠️
28,000 PSI-Flows At 475\ F. The Best All-Round Solder For Gunsmithing
Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
Customer ratings for BROWNELLS HI-FORCE 44™ SOLDER 1LB WIRE
Number of ratings: 1
From brownells.com: 1
Average rating: 4
reattaching ribs(24/05/2012)
The only thing that could improve this is offering it slightly wider. I run it through the rolling mill about 1/2 the time to get it a little wider. This and the Comet flux has made this job far easier than I thought possible - sort of no sweat sweating. Be ready to snug up the jig as it flows and give the part plenty of time too cool before loosening.