The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
More...
Customer ratings for MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 4 BLACK
Number of ratings: 4
From brownells.com: 4
Average rating: 2.8
Be Careful(02/10/2017)
Will not work if you're using Glock backstraps, unless you are willing to modify.
Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.
DANGER/RIP OFF(30/09/2018)
There are three things wrong with this product that kills any usefulness. 1) Once installed, it will eliminate any ability to strip a stuck mag. The magpul part fills the magwell so that there is no room to gab the floor plate to assist in removing the mag. You will be at the total mercy of the mag free falling. 2) once installed, you will not be able to use any aftermarket mag floor plates, not even minimal ones from Vickers 3) It is not compatible with backstraps. You can file and file away to get it to fit, but chances are that you will do a poor job and it will have thrown away $20.
Mines defective!(18/06/2017)
This unit was super easy to install, it took me less than 15 seconds. The build quality appears good, until you insert a magazine. It does NOT go in easy! You literally have to slam it in hard for the magazine to properly catch,10 magazines later my palm couldn't take it no more! The next morning I called Magpul, they're sending me a replacement unit, but they claim this is normal, ??? If the new unit works, then I will update my review.
Another GREAT product from Magpul(29/06/2017)
It's a great mag-well! I installed them on all of my Gen-3's. They take about 30 seconds to install. They do make it easier and faster to do slide-lock (emergency) reloads. My only issue was that, some of my Gen-3's were a bit older and had a cutout on the front strap of the frame. I didn't care for the gap, so I contacted Glock USA and inquired into getting new frames, without the cutout. I followed their instructions, and in less than 10 days I had new replacement frames, without the cutout. I have to say, I was very impressed with Glock's service! All is good now!
Product no.: 100900005 MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 4 BLACK Mfr Part: MAG932-BLK840815117537 The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
34.9GBP113£34.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Magpul GL Enhanced Magazine Well is compatible with standard capacity Glock factory magazines, Magpul GL magazines, and various aftermarket floorplates and extensions.
Reduced capacity (10 rd) factory Glock magazines may not fit well due to dimensional differences.
Some large aftermarket floorplates might interfere with the magazine well.
Made in USA
US export classification: 0A501.y.1
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100900004 MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK Mfr Part: MAG908-BLK840815117520 The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
34.9GBP75£34.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
More...
Customer ratings for MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 4 BLACK
Number of ratings: 4
From brownells.com: 4
Average rating: 2.8
Be Careful(02/10/2017)
Will not work if you're using Glock backstraps, unless you are willing to modify.
Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.
DANGER/RIP OFF(30/09/2018)
There are three things wrong with this product that kills any usefulness. 1) Once installed, it will eliminate any ability to strip a stuck mag. The magpul part fills the magwell so that there is no room to gab the floor plate to assist in removing the mag. You will be at the total mercy of the mag free falling. 2) once installed, you will not be able to use any aftermarket mag floor plates, not even minimal ones from Vickers 3) It is not compatible with backstraps. You can file and file away to get it to fit, but chances are that you will do a poor job and it will have thrown away $20.
Mines defective!(18/06/2017)
This unit was super easy to install, it took me less than 15 seconds. The build quality appears good, until you insert a magazine. It does NOT go in easy! You literally have to slam it in hard for the magazine to properly catch,10 magazines later my palm couldn't take it no more! The next morning I called Magpul, they're sending me a replacement unit, but they claim this is normal, ??? If the new unit works, then I will update my review.
Another GREAT product from Magpul(29/06/2017)
It's a great mag-well! I installed them on all of my Gen-3's. They take about 30 seconds to install. They do make it easier and faster to do slide-lock (emergency) reloads. My only issue was that, some of my Gen-3's were a bit older and had a cutout on the front strap of the frame. I didn't care for the gap, so I contacted Glock USA and inquired into getting new frames, without the cutout. I followed their instructions, and in less than 10 days I had new replacement frames, without the cutout. I have to say, I was very impressed with Glock's service! All is good now!