Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt bushing is too large to allow a spring plug to pull out from the front.
SPECS: Machined, Blue, matte finish. Govt.(1911) and .701" (17.8mm) O.D. Flange is .915" (23.24mm) wide and .129” thick. May require gunsmith fitting.
More...
Customer ratings for EGW MELT BUSHING WRENCH
Number of ratings: 1
From brownells.com: 1
Average rating: 5
Excellent fit! Drop in!(11/05/2014)
I have a Colt 1991A1 and this bushing is just phenomenal! It fits the slide snugly - but I do not need the special wrench - and I rolled up a piece of 220 grit emery cloth and just twisted it in the bushing about 6 times. Oiled it and wiped it out. Oiled it again and it fits perfectly! The gun looks great. I also added the Clark reverse plug and an ISMI flat wire spring. You do not need a two piece guide rod. The gun looks and function better than ever!
Product no.: 296000001 EGW MELT BUSHING WRENCH Mfr Part: 70502841370108619 Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt bushing is too large to allow a spring plug to pull out from the front.
The 1911 "MELT" Bushing by EGW features a large flange that eliminates sharp edges, requiring a two-piece guide rod set-up for disassembly.
It is specifically designed for 1911 Govt. models and may necessitate gunsmith fitting due to its precise dimensions.
The bushing has a machined, blue, matte finish with a flange measuring .915" wide and .129” thick, and an outer diameter of .701" (17.8mm).
Attributes
Make:
1911
Delivery weight: 0.027kg
Item details
Made in USA
Product no.: 296012100 EGW 1911 BLUE MELT BUSHING Mfr Part: 14311B841370103522 Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt bushing is too large to allow a spring plug to pull out from the front.
Large flange eliminates the sharp edges and step of conventional bushings. 1911 fits Govt. Melt Bushings require a two piece guide rod set-up to disassemble your gun. The spring will need to be taken out of the back as well. The flange on the melt bushing is too large to allow a spring plug to pull out from the front.
SPECS: Machined, Blue, matte finish. Govt.(1911) and .701" (17.8mm) O.D. Flange is .915" (23.24mm) wide and .129” thick. May require gunsmith fitting.
More...
Customer ratings for EGW MELT BUSHING WRENCH
Number of ratings: 1
From brownells.com: 1
Average rating: 5
Excellent fit! Drop in!(11/05/2014)
I have a Colt 1991A1 and this bushing is just phenomenal! It fits the slide snugly - but I do not need the special wrench - and I rolled up a piece of 220 grit emery cloth and just twisted it in the bushing about 6 times. Oiled it and wiped it out. Oiled it again and it fits perfectly! The gun looks great. I also added the Clark reverse plug and an ISMI flat wire spring. You do not need a two piece guide rod. The gun looks and function better than ever!