Help and contact
United Kingdom
(0) Basket
Newsletter
EGW
SAVAGE M12 FTR RND BACK SA F-CLASS 3" EXT PICATINNY SCOPE MOUNT
94.9
94.9
2
GBP
Product no.: 296000439
EGW SAVAGE M12 FTR SA RND REC 1-PC 3" EXT PIC BASE 0MOA SINGLE
Mfr Part: 41040 841370105434 This Savage base will work with any short action round back Savage rifle without an ejection port. It has an extra 3"" over the front of the receiver. Savages without an accu-trigger will require our flat back mount (listed separately). EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. 41030 Mount Fits: Savage Model 10 Short Action Round Rear Receiver Savage Model 11 Short Action Round Rear Receiver Savage Model 12 Short Action Round Rear Receiver Savage Model 14 Short Action Round Rear Receiver Savage Model 16 Short Action Round Rear Receiver Savage Model 110 Short Action Round Rear Receiver Stevens Model 200 Short Action Round Rear Receiver 41040 mount fits: Savage Model 12 FTR Short Action Round Rear Receiver Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount.
EGW SAVAGE M12 FTR SA RND REC 1-PC 3" EXT PIC BASE 0MOA SINGLE
Mfr Part: 41040 841370105434 This Savage base will work with any short action round back Savage rifle without an ejection port. It has an extra 3"" over the front of the receiver. Savages without an accu-trigger will require our flat back mount (listed separately). EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. 41030 Mount Fits: Savage Model 10 Short Action Round Rear Receiver Savage Model 11 Short Action Round Rear Receiver Savage Model 12 Short Action Round Rear Receiver Savage Model 14 Short Action Round Rear Receiver Savage Model 16 Short Action Round Rear Receiver Savage Model 110 Short Action Round Rear Receiver Stevens Model 200 Short Action Round Rear Receiver 41040 mount fits: Savage Model 12 FTR Short Action Round Rear Receiver Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount.
94.9
GBP
0
£94.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Color: Black
Make: Savage Arms, Savage
Model: F-Class
Number of Bases: 1-Piece
Style: Picatinny Rail
Product no.: 296000440
EGW SAVAGE M12 FTR SA RND REC 1-PC 3" EXT PIC BASE 0MOA EJECT
Mfr Part: 41030 841370105427 This Savage base will work with any short action round back Savage rifle without an ejection port. It has an extra 3"" over the front of the receiver. Savages without an accu-trigger will require our flat back mount (listed separately). EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. 41030 Mount Fits: Savage Model 10 Short Action Round Rear Receiver Savage Model 11 Short Action Round Rear Receiver Savage Model 12 Short Action Round Rear Receiver Savage Model 14 Short Action Round Rear Receiver Savage Model 16 Short Action Round Rear Receiver Savage Model 110 Short Action Round Rear Receiver Stevens Model 200 Short Action Round Rear Receiver 41040 mount fits: Savage Model 12 FTR Short Action Round Rear Receiver Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount.
EGW SAVAGE M12 FTR SA RND REC 1-PC 3" EXT PIC BASE 0MOA EJECT
Mfr Part: 41030 841370105427 This Savage base will work with any short action round back Savage rifle without an ejection port. It has an extra 3"" over the front of the receiver. Savages without an accu-trigger will require our flat back mount (listed separately). EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. 41030 Mount Fits: Savage Model 10 Short Action Round Rear Receiver Savage Model 11 Short Action Round Rear Receiver Savage Model 12 Short Action Round Rear Receiver Savage Model 14 Short Action Round Rear Receiver Savage Model 16 Short Action Round Rear Receiver Savage Model 110 Short Action Round Rear Receiver Stevens Model 200 Short Action Round Rear Receiver 41040 mount fits: Savage Model 12 FTR Short Action Round Rear Receiver Please check your mounting screw diameter and hole spacing before placing your order to ensure you select the correct mount.
94.9
GBP
0
£94.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Color: Black
Make: Savage Arms, Savage
Model: F-Class
Number of Bases: 1-Piece
Style: Picatinny Rail
🎯 Enhance your F-Class shooting with the EGW Savage M12 FTR Picatinny Scope Mount! 🛠️ Durable, USA-made 1-piece rail for precision. Get yours now! 🔍🔫
Why order from us?
Welcome!
to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.
Whether you're looking to maintain, repair, or upgrade, we've got what you need!
For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.
Massive Selection
From the essentials to the unique, find everything under one roof.
Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.
Browse our collection and discover why we're the trusted name in shooting sports & hunting.
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK
Part of the Brownells Europe Group
Classical view
Mobile view
