Customer ratings for BROWNELLS STEEL PILOT FOR .416 MUZZLE
Number of ratings: 10
From brownells.com: 10
Average rating: 4.1
Too big for S&W 625(15/09/2010)
Larger then the 45-1 and that needs to be fit to work with the 625 cylinder
Almost a perfict fit(15/09/2010)
This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.
Too small for S&W 610(15/09/2010)
Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.
Yes this works with Mosins(03/08/2013)
I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.
It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.
Good quality product(13/11/2009)
The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.
This fits Mosin Nagant Rifles(10/08/2013)
Good quality pilot, no wobble when used in the proper size bore.
I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.
If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.
Good quality product.(06/11/2009)
The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.
Good quality product.(06/11/2009)
The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.
Good quality product.(08/11/2009)
The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.
Good quality product(13/11/2009)
The pilot has the look of good quality. It also fits both the muzzle and cutter real well.
Product no.: 080686416 BROWNELLS STEEL PILOT FOR .416 MUZZLE050806018174 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686007 BROWNELLS STEEL PILOT FOR 7MM MUZZLE050806017870 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686023 BROWNELLS STEEL PILOT FOR .22 CENTERFIRE MUZZLE050806017894 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686213 BROWNELLS STEEL PILOT FOR .22 RF MUZZLE (.213")050806017955 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686243 BROWNELLS STEEL PILOT FOR 6MM/.243 MUZZLE050806017979 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686270 BROWNELLS STEEL PILOT FOR .270 MUZZLE050806018006 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686322 BROWNELLS STEEL PILOT FOR .32-20 MUZZLE050806018051 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686384 BROWNELLS STEEL PILOT FOR .38-40 MUZZLE050806018129 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686400 BROWNELLS STEEL PILOT FOR .40/10MM MUZZLE050806018136 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686401 BROWNELLS STEEL PILOT FOR .40/10MM CYLINDER050806018143 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686440 BROWNELLS STEEL PILOT FOR .44 MUZZLE050806018181 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686441 BROWNELLS STEEL PILOT FOR .44 CYLINDER050806018198 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686208 BROWNELLS STEEL PILOT FOR .17 CF MUZZLE (.165")050806017917 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686209 BROWNELLS STEEL PILOT FOR .17 HMR MUZZLE (.166")050806017924 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686210 BROWNELLS STEEL PILOT FOR .17 HIGH STD./HM2 MUZZLE (.167")050806017931 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686480 BROWNELLS STEEL PILOT FOR .480 RUGER MUZZLE050806018266 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686207 BROWNELLS STEEL PILOT FOR .177 AIRGUN MUZZLE (.173")050806017900 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686459 BROWNELLS STEEL PILOT FOR .45 BP MUZZLE050806018259 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686481 BROWNELLS STEEL PILOT FOR .480 RUGER CYLINDER050806018273 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686022 BROWNELLS STEEL PILOT FOR .22 RF MUZZLE (.215")050806017887 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686257 BROWNELLS STEEL PILOT FOR .257 MUZZLE050806017986 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686264 BROWNELLS STEEL PILOT FOR 6.5MM/.264 MUZZLE050806017993 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686308 BROWNELLS STEEL PILOT FOR .30 MUZZLE050806018013 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686311 BROWNELLS STEEL PILOT FOR .311 MUZZLE050806018020 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Product no.: 080686320 BROWNELLS STEEL PILOT FOR .32 MUZZLE050806018037 Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.
Customer ratings for BROWNELLS STEEL PILOT FOR .416 MUZZLE
Number of ratings: 10
From brownells.com: 10
Average rating: 4.1
Too big for S&W 625(15/09/2010)
Larger then the 45-1 and that needs to be fit to work with the 625 cylinder
Almost a perfict fit(15/09/2010)
This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.
Too small for S&W 610(15/09/2010)
Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.
Yes this works with Mosins(03/08/2013)
I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.
It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.
Good quality product(13/11/2009)
The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.
This fits Mosin Nagant Rifles(10/08/2013)
Good quality pilot, no wobble when used in the proper size bore.
I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.
If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.
Good quality product.(06/11/2009)
The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.
Good quality product.(06/11/2009)
The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.
Good quality product.(08/11/2009)
The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.
Good quality product(13/11/2009)
The pilot has the look of good quality. It also fits both the muzzle and cutter real well.