Your basket is empty.

Basket

01788 815115

Newsletter

JERRY FISHER
SCRAPERS

310150001

Description
Ratings (3)

Used For Over 20 Years By One Of The Best

Famous stockmaker Jerry Fisher says: "In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have tried a few. Just hold like a pencil and work from right to left, or left to right, depending on the direction of the wood grain." Precision-ground from tough alloy tool steel, sharpened and ready to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes.

SPECS: Large, 1" (2.5cm) and ¾" (19.0mm). Small, 5/8" (15.9mm) and ½" (12.7mm). Octagon, 1" (2.5cm) and 11/16" (17.5mm).

More...

Customer ratings for JERRY FISHER SMALL FISHER SCRAPER

Number of ratings: 3
From brownells.com: 3
Average rating: 4.7

Good Tool for Scraping any Flat Wood (11/12/2014)

I have used Jerry Fisher scrapers for 30 years.

This flat scaper allows you to work any flat surface in the inletting. It ca also be used to clean up edge in places like a shadow line cheeck piece.

Excellent tool - worth the money. (27/12/2009)

I found this scraper to be a first class tool for bedding a shotgun barrel. Simple to use, sharp and effective. Did the complete job without need for resharpening.
Nice to find a tool that does the job so well and is such a pleasure to use.

SPECTACULAR PRODUCT (12/03/2011)

First ..I am a first time user and a first time maker of a fore end for a Schutzen fore end. I started out with a 3/4 " burr placed in a drill press to set the initial path of the burr . I found the that I would have to set the fore end piece in a drill press vice so that the wood would slide in the vice. I also the found that I even had to tip the piece to engage the burr into the wood (English Walnut) This at least, set the path for the beginning of the inletting for a tapered barrel. (swamped barrel) After taking a bounty paper towel (no interest...just love them )I was able to take the inletting black, also from Brownells (I think the gold would have been too light ..I am 70 years old so....)Coating the barrel with the black and the spinning it into the the new started barrel grouve I found that this scraper while just removing the highlighted black area ...many many times produced a barrel grouve inlett that was not only perfect but put my inlet actually a little low, Perfect, now I could sand or scrape off to make the top surface perfect with the appropriate depth. This was great because I lost control of the tool (my error) the top surface was then perfect. I purchased the other barrel inletting tools in anticapation of problems...don't bother...just buy the scraper...in fact buy them both ...large and small. I only purchased the small ...I could have used the large in the swamped barrel but I managed to do fine. I do not have a financial interest in this company , but I wish I did. I hope this may be beneficial to you in your inletting. Bill

Read 3 more ratings on brownells.com

32.9 32.9 3 GBP

Product no.: 310150001
JERRY FISHER SMALL FISHER SCRAPER
Mfr Part: NONE Famous stockmaker Jerry Fisher says: "In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have tried a few. Just hold like a pencil and work from right to left, or left to right, depending on the direction of the wood grain." Precision-ground from tough alloy tool steel, sharpened and ready to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes.

32.9 GBP 0 £32.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Jerry Fisher endorses this as the best inletting scraper he's used in 20 years of stockmaking.
The scrapers are precision-ground from alloy tool steel, come sharpened, and include instructions.
Set includes three tools with six different sized heads, varying from 1" (2.5cm) to ½" (12.7mm).

Attributes

Delivery weight: 0.023kg

Item details

Made in USA

Product no.: 310150002
JERRY FISHER LARGE FISHER SCRAPER
Mfr Part: NONE Famous stockmaker Jerry Fisher says: "In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have tried a few. Just hold like a pencil and work from right to left, or left to right, depending on the direction of the wood grain." Precision-ground from tough alloy tool steel, sharpened and ready to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes.

32.9 GBP 53 £32.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Product no.: 310150003
JERRY FISHER OCTAGON FISHER SCRAPER
Mfr Part: NONE Famous stockmaker Jerry Fisher says: "In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have tried a few. Just hold like a pencil and work from right to left, or left to right, depending on the direction of the wood grain." Precision-ground from tough alloy tool steel, sharpened and ready to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes.

32.9 GBP 54 £32.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

🛠️ Upgrade your stockmaking with the Jerry Fisher Small Fisher Scraper! Precision-ground for expert wood grain handling. 🌟 Get the perfect finish - Shop now! ✂️🪵

Description
Ratings (3)

Used For Over 20 Years By One Of The Best

SPECS: Large, 1" (2.5cm) and ¾" (19.0mm). Small, 5/8" (15.9mm) and ½" (12.7mm). Octagon, 1" (2.5cm) and 11/16" (17.5mm).

More...

Customer ratings for JERRY FISHER SMALL FISHER SCRAPER

Number of ratings: 3
From brownells.com: 3
Average rating: 4.7

Good Tool for Scraping any Flat Wood (11/12/2014)

I have used Jerry Fisher scrapers for 30 years.

This flat scaper allows you to work any flat surface in the inletting. It ca also be used to clean up edge in places like a shadow line cheeck piece.

Excellent tool - worth the money. (27/12/2009)

SPECTACULAR PRODUCT (12/03/2011)

Read 3 more ratings on brownells.com

Customers also bought
Alternative items

BROWNELLS 6X3/8" STEEL FLAT HEAD WOOD SCREWS BLUED 12 PACK
UNPLATED STEEL FLAT HEAD WOOD SCREW KIT

BROWNELLS

In stock

£9.90 * £9.90 - £79.90*

Wood Screws

BROWNELLS 4 OZ. ACRAGLAS GEL NON-FLAMMABLE KIT
ACRAGLAS GEL 2 GUN BEDDING KITS

BROWNELLS

In stock

£39.90 *

Stock Bedding & Adhesives

🔥 Shape & smooth with precision using the versatile Half-Round Vulcanite File from Grobet! Ideal for wood, plastics & soft metals. Get yours now! ✨🛠️

GROBET FILE CO. OF AMERICA INC 1/2 ROUND VULCANITE FILE
HALF-ROUND VULCANITE FILE

GROBET FILE CO. OF AMERICA INC

In stock

£64.90 *

Wood Files

4.5

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: