Help and contact
United Kingdom
(0) Basket
Newsletter
EGW
SAVAGE LONG ACTION FLAT BACK HD PICATINNY SCOPE MOUNT
94.9
94.9
2
GBP
Product no.: 296000748
EGW SAVAGE 110-116 FLAT BACK LA 1-PIECE PICATINNY BASE 0 MOA
Mfr Part: 80335 841370113910 EGW Savage bases will work with any long action flat back Savage rifle with an ejection port. It is also compatible with the Stevens Long actions. The flat back on this mount will accommodate receivers with flat rears, and guns that do not have an accu-trigger. Savages with an accu-trigger will require our round back mount (listed separately). This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver Stevens Model 200 Long Action Flat Rear Receiver
EGW SAVAGE 110-116 FLAT BACK LA 1-PIECE PICATINNY BASE 0 MOA
Mfr Part: 80335 841370113910 EGW Savage bases will work with any long action flat back Savage rifle with an ejection port. It is also compatible with the Stevens Long actions. The flat back on this mount will accommodate receivers with flat rears, and guns that do not have an accu-trigger. Savages with an accu-trigger will require our round back mount (listed separately). This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver Stevens Model 200 Long Action Flat Rear Receiver
Specs:
Action Type: Long
Color: Black
Elevation: 0 MOA
Make: Savage Arms
Material: Aluminum
Model: 110, 112, 116, 111, 114
Number of Bases: 1-Piece
Style: Picatinny Rail
Product no.: 296000749
EGW SAVAGE 110-116 FLAT BACK LA 1-PIECE PICATINNY BASE 20 MOA
Mfr Part: 80336 841370113927 EGW Savage bases will work with any long action flat back Savage rifle with an ejection port. It is also compatible with the Stevens Long actions. The flat back on this mount will accommodate receivers with flat rears, and guns that do not have an accu-trigger. Savages with an accu-trigger will require our round back mount (listed separately). This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver Stevens Model 200 Long Action Flat Rear Receiver
EGW SAVAGE 110-116 FLAT BACK LA 1-PIECE PICATINNY BASE 20 MOA
Mfr Part: 80336 841370113927 EGW Savage bases will work with any long action flat back Savage rifle with an ejection port. It is also compatible with the Stevens Long actions. The flat back on this mount will accommodate receivers with flat rears, and guns that do not have an accu-trigger. Savages with an accu-trigger will require our round back mount (listed separately). This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver Stevens Model 200 Long Action Flat Rear Receiver
Specs:
Action Type: Long
Color: Black
Elevation: 20 MOA
Make: Savage Arms
Material: Aluminum
Model: 110, 112, 116, 111, 114
Number of Bases: 1-Piece
Style: Picatinny Rail
🔭 Upgrade your Savage Long Action rifle with the EGW HD Picatinny Scope Mount! Durable, made in the USA, and perfect for 0-500yds. Get started now! 🎯
Why order from us?
Welcome!
to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.
Whether you're looking to maintain, repair, or upgrade, we've got what you need!
For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.
Massive Selection
From the essentials to the unique, find everything under one roof.
Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.
Browse our collection and discover why we're the trusted name in shooting sports & hunting.
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK
Part of the Brownells Europe Group
Classical view
Mobile view
