United Kingdom
EGW
SAVAGE FLAT BACK LONG ACTION PICATINNY SCOPE MOUNT
54.9
54.9
2
GBP
Product no.: 296000788
EGW SAVAGE FLAT BACK LONG ACTION 1-PIECE PICATINNY BASE 0 MOA
Mfr Part: 41400 841370105601 This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
EGW SAVAGE FLAT BACK LONG ACTION 1-PIECE PICATINNY BASE 0 MOA
Mfr Part: 41400 841370105601 This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
Specs:
Action Type: Long
Color: Black
Elevation: 0 MOA
Make: Savage Arms
Material: Aluminum
Model: 110, 112, 116, 111, 114
Number of Bases: 1-Piece
Style: Picatinny Rail
Product no.: 296000789
EGW SAVAGE FLAT BACK LONG ACTION 1-PIECE PICATINNY BASE 20 MOA
Mfr Part: 41402 841370105618 This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
EGW SAVAGE FLAT BACK LONG ACTION 1-PIECE PICATINNY BASE 20 MOA
Mfr Part: 41402 841370105618 This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
Specs:
Action Type: Long
Color: Black
Elevation: 20 MOA
Make: Savage Arms
Material: Aluminum
Model: 110, 112, 116, 111, 114
Number of Bases: 1-Piece
Style: Picatinny Rail
🎯 Upgrade your Savage Long Action rifle with the EGW 0 MOA Picatinny Scope Mount! Precision machined for a perfect fit. Shop now for enhanced accuracy! 🔫🛠️
Customer Promise
Our promise to you
The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.
If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.
Trade Associations:
Welcome!
Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!
If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.
Your Brownells UK Team
Trade Associations:
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories
Classical view
Mobile view
Newsletter