Reloading Equipment

Turning & Expander Mandrels

In stock

£59.90 *

4.8

AREA 419 3" DROP TUBE
FUNNEL DROP TUBE

AREA 419

In stock

£21.90 *

Powder Funnels

The Area 419 Funnel Drop Tube aids in filling cases beyond normal limits, especially with extruded powders.
It is designed to help handloaders achieve more precise powder charges by reducing air pockets in the case.
The drop tube is made from 6061-T6 aluminum, measures 3 inches, and is compatible with Area 419's powder funnel system.

BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
SWAGE GAGE™ PRIMER POCKET GAUGE

BROWNELLS

In stock

£19.90 *

The Swage Gage Primer Pocket Gauge allows you to check the depth and diameter of primer pockets for small or large primers.
Using the "Go" end, you can determine if the primer pocket depth is correct, the crimp is properly removed, and if the pocket is not too loose.
If the "No Go" end fits into the primer pocket, it indicates that the pocket is too loose to securely hold a primer, and the brass should be discarded.

4.2

L.E. WILSON 22 HORNET FIRED CASE HOLDER
RIFLE CASE HOLDERS

L.E. WILSON

In stock

£18.90 * £17.90 - £26.90*

(Select Items on Sale!)

Old price £24.60

Trimmer Case Holders | Case Trimmers

3.8

LYMAN .223 REM CASE LENGTH/HEADSPACE GAUGE
RIFLE CASE LENGTH/HEADSPACE GAUGES

LYMAN

In stock

£39.90 * £38.90 - £39.90*

(Select Items on Sale!)

Old price £47.40

LEE PRECISION 6.5MM CREEDMOOR 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

Lyman's .223 Rem Case Length/Headspace Gauge is crucial for checking bottleneck rifle cases to ensure safety and accuracy by maintaining proper headspace.
The gauge allows reloaders to quickly verify that resized cases meet the minimum and maximum allowable headspace dimensions.
Any rifle case with excessive headspace detected by the gauge should be considered unsafe and must be disposed of immediately.

LEE PRECISION

In stock

£74.90 * £64.90 - £74.90*

Rifle Dies

The set includes a full length-resizing die, a collet neck sizing die, an Easy Adjust Dead Length Bullet seating die, and a Factory Crimp die for maximum versatility and precision.
No case lube is needed, and the design ensures that cases last almost indefinitely while providing factory-like accuracy and dependability.
Accessories include a shell holder, powder measure, and Lee load data to facilitate reloading with all common powder brands.

4.2

SINCLAIR INTERNATIONAL BULLET SORTING STAND WITH DIGITAL INDICATOR
SINCLAIR BULLET SORTING STAND

LEE PRECISION LEE DELUXE QUICK TRIM
DELUXE QUICK TRIM CASE TRIMMER

In stock

£159.90 * £16.90 - £159.90*

Bullet Comparators

3.7

LEE PRECISION

In stock

£31.90 *

Case Trimmers

The Lee Deluxe Quick Trim case trimmer accurately trims and chamfers brass cases without the need for calipers or manual adjustments.
Features a click adjustable stop for precise trim length control in .001 inch increments, allowing users to customize case length.
Comes with a quick trim die for easy installation in a press and includes a snap on chip catcher for cleanliness.

4.5

SINCLAIR INTERNATIONAL 30 CALIBER (0.308") COMPARATOR INSERT
BULLET COMPARATOR INSERTS

RCBS TRIM PRO-2 MANUAL CASE TRIMMER KIT
TRIM PRO 2 CASE TRIMMER

In stock

£12.90 * £8.90 - £12.90*

Bullet Comparators | Bullet Comparator Inserts

The Sinclair Bullet Comparator Inserts are designed to fit the Sinclair Comparator and Bump Gage Body for precise bullet and cartridge measurements.
Constructed from stainless steel with a tapered design, these inserts minimize wobble and more accurately replicate the chamber throat.
They allow for consistent measurement of bullet ogive-to-base and loaded round ogive-to-cartridge-base, offering more reliability than overall length measurements.

RCBS

In stock

£199.90 *

Case Trimmers

The Trim Pro-2 Manual Case Trimmer Kit features a spring-loaded universal shell holder for secure case alignment and improved accuracy.
It is designed for precision with .001" accuracy and includes both course and fine trim length adjustments with micrometer markings.
The kit comes with pilots for various calibers and can accommodate case head diameters from .250" to .625" and case lengths from 5.7x28mm to .338 Lapua Magnum.

Achieve precision reloading with FORSTER Full Length Sizing Die for .308 Win 🎯 High-quality steel for concentric rounds. Shop now and refine your rifle dies collection! 🔩✨

FORSTER PRODUCTS, INC. FULL LENGTH SIZING DIE, 308 WIN
FULL LENGTH SIZING DIES

FORSTER PRODUCTS, INC.

In stock

£74.90 * £59.90 - £309.90*

Rifle Dies

Forster Full Length Sizing Dies are made from high-quality steel and machined to precise tolerances, ensuring concentric rounds for reloaders.
The dies feature a unique Forster Cross Bolt Die Locking Ring for secure locking without thread damage and an E-Z Out Expander button for improved neck concentricity.
Specifically designed for the .308 Winchester cartridge, these dies provide support and alignment during the resizing process to maintain case integrity.

3.7

LYMAN MAGNUM INERTIA BULLET PULLER
MAGNUM INERTIA BULLET PULLER

LYMAN

In stock

£33.90 *

Bullet Pullers

3.4

SINCLAIR INTERNATIONAL UNIFORMER SCREWDRIVER ADAPTOR
SINCLAIR UNIFORMER SCREWDRIVER ADAPTOR

SINCLAIR INTERNATIONAL 30 CALIBER (0.307") CARBIDE EXPANDER MANDREL
CARBIDE EXPANDER MANDRELS

In stock

£14.90 *

Uniformers

Turning & Expander Mandrels

In stock

£59.90 *

Sinclair Carbide Neck Expander Mandrels are made from solid carbide for precision and lubricity, reducing galling and material transfer.
The mandrels are designed .001" smaller than bullet diameter for optimal neck tension and concentricity when used before neck turning or bullet seating.
Compatible with the Sinclair Expander Die and Neck Turning Tools, these mandrels are specifically made for 30 Caliber with a diameter of 0.307 inches.

RCBS CASE LUBE KIT
CASE LUBE KIT

RCBS

In stock

£38.90 *

Case Lube

LYMAN HANDGUN AMMO CHECKER
AMMO CHECKERS MULTIPLE CALIBERS

LYMAN

In stock

£54.90 * £54.90 - £64.90*

FORSTER PRODUCTS, INC. ORIGINAL CASE TRIMMER KIT W/ PILOTS & COLLETS
ORIGINAL CASE TRIMMER KIT

Lyman's Ammo Checkers ensure ammunition quality and consistency, fitting a variety of handgun and rifle calibers.
Made from 6061 T6 aircraft grade aluminum, these gauges conform to SAAMI minimum chamber dimensions.
They provide a quick "no-go" gauge to prevent misfeeds by confirming if rounds will fit in the firearm's chamber.

🎯 Achieve precision reloading with the Forster Original Case Trimmer Kit! Includes 6 pilots & 3 collets for most calibers. Shop now for a top-notch trimming experience! 🔍✂️

FORSTER PRODUCTS, INC.

In stock

£169.90 *

Case Trimmers

The Forster Original Case Trimmer Kit includes six pilots (22, 24, 25, 27, 28, & 30) and three collets (1, 2, & 3) suitable for most rifle and pistol calibers.
It functions like a miniature lathe with a superior shell holder design based on a Brown & Sharpe type collet.
The trimmer allows for expansion by adding accessories, but requires a separate Forster Trimmer Cutter w/Shaft 17 cal for use with .17 cal Pilot.

SINCLAIR INTERNATIONAL 30 CALIBER (0.306") TIN TURNING MANDREL
TIN COATED TURNING MANDRELS

Turning & Expander Mandrels

In stock

£26.90 * £21.90 - £26.90*

The Sinclair TiN Turning Mandrels offer increased abrasion resistance and lubricity compared to Stainless Steel Mandrels.
These mandrels have a Titanium Nitride coating that enhances tool life up to 10 times over standard steel mandrels.
Designed for 30 Caliber with a 0.306" diameter, the mandrels are useful for aligning the case during neck turning and setting neck tension.

SINCLAIR INTERNATIONAL 22 CALIBER CHAMBER LENGTH GAGE
Sinclair Chamber Length Gage

In stock

£9.90 * £8.90 - £9.90*

LEE PRECISION 7.62X39MM PACESETTER 3-DIE SET
PACESETTER RIFLE THREE-DIE SETS

The Sinclair Chamber Length Gauge allows handloaders to measure the actual chamber length from the bolt face to the chamber's neck end, helping determine excess case length.
It is made of soft 12L14 steel to avoid chamber damage and comes with step-by-step instructions, providing reusability for consistent measurements.
Not suitable for thin-necked cases like the 22 Hornet or 218 Bee, nor tight-necked chambers, except the G-243T, and should not be used in handguns or certain rifles.

3.4

LEE PRECISION

In stock

£49.90 * £48.90 - £59.90*

Rifle Dies | Handgun Dies

3.5

Show 20 more results (Page 2)

1 - 20 of 789 results

Page: 1 2 3 4 5 ... 40 < >

Reset all filters
Restrict search

E-mail address / User name

Password

Forgot your password?
Register

Why order from us?

Unrivaled Product Selection

You want it? We got it!

Expert Customer Advice

Via Phone, Chat & Email

US Goods to your doorstep

No customs, no problems

100 days Returns

Shop with a peace of mind

Offers, Promotions & Exclusive Products

Through our weekly newsletter

Shamelessly Honest

We encourage critical product review

Fair Pricing

We pursue a sustainable pricing policy

We won't leave you stranded

Our entire team is made up of passionate gun enthusiasts

Categories Preview

Reloading Equipment - Case Cleaning

SINCLAIR INTERNATIONAL 6.5MM-30 CALIBER CASE NECK BRUSH
SINCLAIR CASE NECK BRUSHES

SINCLAIR INTERNATIONAL

In stock

£6.90 * £6.90 - £33.90*

Case Cleaning Products

LEE PRECISION LEE UNIVERSAL DECAP PIN
REPLACEMENT DECAP PIN FOR LEE® UNIVERSAL DECAPPING DIE

LEE PRECISION

In stock

£6.90 *

Decapping Dies & Accessories

The Lee Universal Decapping die is designed for decapping cases without needing lube or cleaning.
It is guaranteed unbreakable by LEE PRECISION and can remove crimped-in primers.
Suitable for cases up to .550” but not recommended for .17-.20 caliber cases.

LYMAN 1200 PRO TUMBLER 230 V
1200 PRO TUMBLERS

LYMAN

In stock

£169.90 * £169.90 - £279.90*

Case Tumblers & Accessories

The 1200 Pro Tumbler is Lyman's best-selling entry-level tumbler with an affordable price.
Features a built-in sifter lid for easy media separation, eliminating the need for a separate sifter purchase.
Equipped with a heavy-duty, thermally protected motor, it can clean up to 350 .38 Special cases per cycle with a 2 lbs. media capacity.

FLITZ TUMBLER MEDIA ADDITIVE 16OZ
TUMBLER/MEDIA ADDITIVE

FLITZ

In stock

£34.90 *

Tumbling Media & Additives

Flitz TUMBLER MEDIA ADDITIVE enhances the brightness and shine of metals by removing oxidation, tarnish, lead buildup, and other contaminants.
It can be combined with corn cob or walnut shells to reduce tumbling time by half compared to using media alone.
The additive is ecologically safe, free of ammonia, and will not damage primers or cause brass to become brittle.

LYMAN TURBO BRITE BRASS POLISH 20 OZ.
TURBO BRITE BRASS POLISH 20 OZ.

LYMAN

In stock

£36.90 *

Tumbling Media & Additives

RCBS SMALL CASE NECK BRUSH 22-25 CALIBER
CASE NECK BRUSHES

RCBS

In stock

£8.90 * £7.90 - £8.90*

Case Cleaning Products

RCBS case neck brushes are designed to clean dirt and powder residue from inside case necks while lubricating for expansion.
The small case neck brush is suitable for .22 to .25 caliber and is compatible with the no-roll design of the RCBS Accessory Handle 2.
There are three sizes of nylon bristle brushes available, with the small brush specifically for .22 to .25 caliber cases.

Case Cleaning - More...

Reloading Equipment - Case Preparation

SINCLAIR INTERNATIONAL 17 - 338 CALIBER EXPANDER DIE BODY
GENERATION II EXPANDER DIES

SINCLAIR INTERNATIONAL

In stock

£59.90 *

Turning & Expander Mandrels

4.8

L.E. WILSON 338 LAPUA MAGNUM CASE HOLDER
RIFLE CASE HOLDERS

L.E. WILSON

In stock

£18.90 * £17.90 - £26.90*

(Select Items on Sale!)

Old price £24.60

Trimmer Case Holders | Case Trimmers

3.8

LEE PRECISION LEE DELUXE QUICK TRIM
DELUXE QUICK TRIM CASE TRIMMER

LEE PRECISION

In stock

£31.90 *

Case Trimmers

The Lee Deluxe Quick Trim case trimmer accurately trims and chamfers brass cases without the need for calipers or manual adjustments.
Features a click adjustable stop for precise trim length control in .001 inch increments, allowing users to customize case length.
Comes with a quick trim die for easy installation in a press and includes a snap on chip catcher for cleanliness.

4.5

✂️ Achieve precision case trimming with the Sinclair Stainless Ultimate Trimmer! 🌟 Perfect for reloaders. Get consistent results every time. Learn more now! 🔍🎯

SINCLAIR INTERNATIONAL ULTIMATE STAINLESS CASE TRIMMER WITH STAND
STAINLESS ULTIMATE TRIMMER

SINCLAIR INTERNATIONAL

In stock

£214.90 *

Case Trimmers

The Sinclair Stainless Ultimate Trimmer is a highly accurate stainless steel version of the Wilson Case Trimmer, exclusive to Sinclair International.
It features a unique case holder system that holds cases by the body taper, ensuring consistent trim lengths by aligning cases square to the cutter.
The trimmer integrates a Sinclair Micrometer head for precise adjustment, with no need for pilots or collets.

4.7

SINCLAIR INTERNATIONAL 30 CALIBER (0.307") STAINLESS EXPANDER MANDREL
STAINLESS STEEL EXPANDER MANDRELS

SINCLAIR INTERNATIONAL

In stock

£16.90 * £16.90 - £18.90*

Turning & Expander Mandrels

The mandrels are crafted from high-grade stainless steel for precision in neck turning tools.
Expander mandrels are sized 0.001" larger than turning mandrels to ensure a perfect fit for the neck turning process.
Compatible with both NT-3000 and NT-1000 neck turning tools, as well as most older models.

3.7

SINCLAIR INTERNATIONAL 30 CALIBER (0.306") TIN TURNING MANDREL
TIN COATED TURNING MANDRELS

SINCLAIR INTERNATIONAL

In stock

£26.90 * £21.90 - £26.90*

Turning & Expander Mandrels

The Sinclair TiN Turning Mandrels offer increased abrasion resistance and lubricity compared to Stainless Steel Mandrels.
These mandrels have a Titanium Nitride coating that enhances tool life up to 10 times over standard steel mandrels.
Designed for 30 Caliber with a 0.306" diameter, the mandrels are useful for aligning the case during neck turning and setting neck tension.

Case Preparation - More...

Reloading Equipment - Measuring Tools

BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
SWAGE GAGE™ PRIMER POCKET GAUGE

BROWNELLS

In stock

£19.90 *

Case Gauges & Headspace Tools

The Swage Gage Primer Pocket Gauge allows you to check the depth and diameter of primer pockets for small or large primers.
Using the "Go" end, you can determine if the primer pocket depth is correct, the crimp is properly removed, and if the pocket is not too loose.
If the "No Go" end fits into the primer pocket, it indicates that the pocket is too loose to securely hold a primer, and the brass should be discarded.

4.2

LYMAN .223 REM CASE LENGTH/HEADSPACE GAUGE
RIFLE CASE LENGTH/HEADSPACE GAUGES

LYMAN

In stock

£39.90 * £38.90 - £39.90*

(Select Items on Sale!)

Old price £47.40

Case Gauges & Headspace Tools

Lyman's .223 Rem Case Length/Headspace Gauge is crucial for checking bottleneck rifle cases to ensure safety and accuracy by maintaining proper headspace.
The gauge allows reloaders to quickly verify that resized cases meet the minimum and maximum allowable headspace dimensions.
Any rifle case with excessive headspace detected by the gauge should be considered unsafe and must be disposed of immediately.

SINCLAIR INTERNATIONAL 30 CALIBER (.308") BULLET COMPARATOR
SINCLAIR BULLET SORTING STAND

SINCLAIR INTERNATIONAL

In stock

£19.90 * £16.90 - £159.90*

Bullet Comparators

3.7

SINCLAIR INTERNATIONAL 30 CALIBER (0.308") COMPARATOR INSERT
BULLET COMPARATOR INSERTS

SINCLAIR INTERNATIONAL

In stock

£12.90 * £8.90 - £12.90*

Bullet Comparators | Bullet Comparator Inserts

The Sinclair Bullet Comparator Inserts are designed to fit the Sinclair Comparator and Bump Gage Body for precise bullet and cartridge measurements.
Constructed from stainless steel with a tapered design, these inserts minimize wobble and more accurately replicate the chamber throat.
They allow for consistent measurement of bullet ogive-to-base and loaded round ogive-to-cartridge-base, offering more reliability than overall length measurements.

LYMAN HANDGUN AMMO CHECKER
AMMO CHECKERS MULTIPLE CALIBERS

LYMAN

In stock

£54.90 * £54.90 - £64.90*

Case Gauges & Headspace Tools

Lyman's Ammo Checkers ensure ammunition quality and consistency, fitting a variety of handgun and rifle calibers.
Made from 6061 T6 aircraft grade aluminum, these gauges conform to SAAMI minimum chamber dimensions.
They provide a quick "no-go" gauge to prevent misfeeds by confirming if rounds will fit in the firearm's chamber.

SINCLAIR INTERNATIONAL XL BULLET COMPARATOR & BUMP GAGE BODY
SINCLAIR INSERT STYLE BULLET COMPARATOR

SINCLAIR INTERNATIONAL

In stock

£35.90 * £19.90 - £35.90*

Bullet Comparators

3.1

Measuring Tools - More...

Reloading Equipment - Meplat Uniforming

WHIDDEN GUNWORKS 338 CALIBER BULLET POINTING SLEEVE
Whidden Bullet Pointing Sleeve

WHIDDEN GUNWORKS

In stock

£69.90 *

The Whidden Bullet Pointing Sleeve is used to profile bullet tips to reduce drag and improve ballistic coefficient (BC).
Compatible with standard presses, it allows for quick pointing of bullets, similar to sizing brass.
Designed for .338 caliber bullets and can be used with additional sleeves for different calibers.

WHIDDEN GUNWORKS #2 BULLET POINTING DIE INSERT
WHIDDEN POINTING DIE INSERTS

WHIDDEN GUNWORKS

Not available

£74.90 *

WHIDDEN POINTING DIE INSERTS improve bullet ballistic coefficient (BC) by smoothing the transition between the ogive and the tip.
Developed with ballistician Bryan Litz, these inserts are used with the correct pointing sleeve for specific bullet designs.
#2 Die Inserts are specifically designed for bullets with shorter, blunter ogives.

Meplat Uniforming - More...

Reloading Equipment - Powder Handling

AREA 419 3" DROP TUBE
FUNNEL DROP TUBE

AREA 419

In stock

£21.90 *

Powder Funnels

The Area 419 Funnel Drop Tube aids in filling cases beyond normal limits, especially with extruded powders.
It is designed to help handloaders achieve more precise powder charges by reducing air pockets in the case.
The drop tube is made from 6061-T6 aluminum, measures 3 inches, and is compatible with Area 419's powder funnel system.

SATERN 30 CALIBER POWDER FUNNEL
ALUMINUM POWDER FUNNELS

SATERN

In stock

£22.90 * £19.90 - £33.90*

Powder Funnels

4.1

AREA 419 375 CALIBER FUNNEL HEAD
CALIBER SPECIFIC FUNNEL HEADS

AREA 419

In stock

£22.90 * £21.90 - £22.90*

Powder Funnels

The Area 419 caliber-specific funnel heads are precision-machined for reloading cartridges, ensuring a perfect fit for .375 caliber cases.
These funnel heads are designed to prevent powder spillage by matching the bullet diameter, allowing for trouble-free powder transfer.
There are 11 different caliber options available, catering to various handloading requirements and preferences.

LYMAN POWDER PAL FUNNEL PAN
POWDER PAL FUNNEL PAN

LYMAN

In stock

£14.90 *

Powder Funnels

LYMAN GEN6 COMPACT POWDER SYSTEM
GEN6 COMPACT TOUCH SCREEN POWDER SYSTEM

LYMAN

In stock

£339.90 *

Powder Measures & Dispensers

The GEN6 Compact Touch Screen Powder System is highly accurate to one tenth of a grain and can dispense smokeless powder at a rate of two grains per second.
Designed for convenience, it features a compact size that uses 50% less bench space and has a touch screen that can be accessed by both right and left-handed users.
The system includes advanced technology such as a quick-drain to change powders, anti-static/anti-drift capabilities, and an electronic interference shield to prevent disruption from devices like cell phones.

2.8

AREA 419 BILLET POWDER CUP
BILLET POWDER CUP

AREA 419

In stock

£89.90 *

Powder Measures & Dispensers

The Area 419 Billet Powder Cup is designed to contain splashed powder for a safer reloading environment.
Made from 6061 billet aluminum, the cup has a capacity of over 750 grains of powder and weighs just over 700 grains.
It measures 2 inches in diameter and height, with a 3-inch handle, and fits under a powder dispenser to catch stray grains.

Powder Handling - More...

Reloading Equipment - Priming Tools

🌟 Achieve precision in handloading with the Sinclair Stainless Steel Priming Tool! Crafted for a lifetime of use. No plastic parts. 🛠️ Perfect for both large & small primers. Learn more! 🔍

SINCLAIR INTERNATIONAL STAINLESS STEEL PRIMING TOOL
SINCLAIR PRIMING TOOL

SINCLAIR INTERNATIONAL

In stock

£129.90 * £19.90 - £129.90*

Priming Tool Accessories | Hand Tools

The Sinclair Priming Tool is crafted from high-quality materials such as stainless steel and aircraft-grade aluminum, ensuring durability and a lifetime of trouble-free use.
It is designed for precision with features like a tool head that locks the case head square to the priming punch, and it provides excellent leverage while being sensitive enough to feel the primer seating.
The tool includes housings and punches for both large and small primers but requires separate purchase of Sinclair Priming Tool Shellholders, and contains no plastic parts to wear or break.

4.5

LEE PRECISION LEE RAM PRIME
RAM PRIME PRIMING UNIT

LEE PRECISION

In stock

£24.90 *

Priming Tool Accessories

🎯 Enhance your reloading setup with the CO-AX Primer Seater by FORSTER PRODUCTS! No shellholders needed, safe & efficient. 🛠️ Get the best seating now!

FORSTER PRODUCTS, INC. SMALL PRIMER FEED TUBE
CO-AX PRIMER SEATER

FORSTER PRODUCTS, INC.

In stock

£17.90 * £15.90 - £144.90*

Benchmount Tools

The CO-AX Primer Seater features automatic shellholder jaws for secure case handling without needing additional shellholders.
Primers are stacked sideways in the feed tubes for safety, with open fronts for easy supply monitoring.
Includes a machined tool base with a built-in primer flip tray and comes with both large and small primer tubes for rifle and pistol cases.

3.5

RCBS ROCK CHUCKER SUPREME AUTO PRIMING UNIT
ROCK CHUCKER SUPREME AUTO PRIME

RCBS

Reordered

£94.90 *

Benchmount Tools

Converts single-at-a-time priming to a tube-fed system, eliminating manual primer handling.
Includes a safety shield and has a 100 primer capacity, enhancing the speed of the single-stage reloading process.
Comes with large and small primer pickup, feed tubes, and primer seat plugs for versatility.

RCBS SQUARE PRIMER FLIPPER TRAY
SQUARE PRIMER FLIPPER TRAY

RCBS

In stock

£12.90 *

Priming Tool Accessories

The SQUARE PRIMER FLIPPER TRAY is designed for holding and storing primers, with a ridged surface for easy orientation.
It is compatible with large Federal primer boxes and has a capacity for up to 300 small rifle primers.
RCBS recommends loading only 100 primers at a time for optimal use.

LYMAN E-ZEE PRIME HAND PRIMING TOOL
E-ZEE PRIME HAND PRIMING TOOL

LYMAN

In stock

£69.90 *

Hand Tools

Lyman's E-ZEE Prime Hand Priming Tool is tray-fed with separate trays for large and small primers, featuring shut-off gates to prevent spillage.
The tool is designed for hand priming with an ergonomic handle to prevent fatigue and provide leverage while maintaining the necessary "feel" for proper primer seating.
Compatible with standard shellholders from Lyman and other popular brands, allowing for versatility in use.

2.5

Priming Tools - More...

Reloading Equipment - Reloading Dies

LEE PRECISION 6.5MM CREEDMOOR 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

LEE PRECISION

In stock

£74.90 * £64.90 - £74.90*

Rifle Dies

The set includes a full length-resizing die, a collet neck sizing die, an Easy Adjust Dead Length Bullet seating die, and a Factory Crimp die for maximum versatility and precision.
No case lube is needed, and the design ensures that cases last almost indefinitely while providing factory-like accuracy and dependability.
Accessories include a shell holder, powder measure, and Lee load data to facilitate reloading with all common powder brands.

4.2

FORSTER PRODUCTS, INC. FULL LENGTH SIZING DIE, 308 WIN
FULL LENGTH SIZING DIES

FORSTER PRODUCTS, INC.

In stock

£74.90 * £59.90 - £309.90*

Rifle Dies

Forster Full Length Sizing Dies are made from high-quality steel and machined to precise tolerances, ensuring concentric rounds for reloaders.
The dies feature a unique Forster Cross Bolt Die Locking Ring for secure locking without thread damage and an E-Z Out Expander button for improved neck concentricity.
Specifically designed for the .308 Winchester cartridge, these dies provide support and alignment during the resizing process to maintain case integrity.

3.7

LEE PRECISION 7.62X39MM PACESETTER 3-DIE SET
PACESETTER RIFLE THREE-DIE SETS

LEE PRECISION

In stock

£49.90 * £48.90 - £59.90*

Rifle Dies | Handgun Dies

3.5

LEE PRECISION 30 CAL/7.5MM (.3055") UNDERSIZE MANDREL
COLLET NECK SIZER UNDERSIZE MANDRELS

LEE PRECISION

In stock

£9.90 *

Replacement Parts & Upgrades

LEE PRECISION LEE UNIVERSAL DECAPPING DIE
UNIVERSAL DECAPPING DIE

LEE PRECISION

In stock

£19.90 *

Decapping Dies & Accessories

4.7

🎯 Achieve precision reloading with the FORSTER 6.5 Creedmoor Ultra Micrometer Seater Die. Fine-tune your rounds with ease! 🔍 Shop now for top-quality dies.

FORSTER PRODUCTS, INC. 6.5 CREEDMOOR ULTRA MICROMETER SEATER DIE
ULTRA™ MICROMETER SEATER DIES

FORSTER PRODUCTS, INC.

In stock

£149.90 * £109.90 - £329.90*

Rifle Dies

Forster Ultra Micrometer Seater Dies provide exceptional concentricity in bullet seating with precise micrometer adjustments.
The dies are crafted from high-quality steel with a polished finish, ensuring durability and a fine finish.
Features a Cross Bolt Die Locking Ring for secure die locking without thread damage and allows easy bullet seating depth changes.

4.3

Reloading Dies - More...

Reloading Equipment - Reloading Presses

Upgrade your reloading setup with the Forster Co-Ax Press Short Handle! 🔄 Perfect for small rifle cartridges & handgun calibers. Easy to install & ergonomic grip. Get started now! 🔧

FORSTER PRODUCTS, INC. CO-AX PRESS HANDLE, SHORT
CO-AX PRESS SHORT HANDLE

FORSTER PRODUCTS, INC.

In stock

£28.90 *

Single Stage Presses

The CO-AX PRESS SHORT HANDLE is designed for the Forster Co-Ax® single stage press, providing less leverage which is ideal for small rifle cartridges, seating and priming operations, and most handgun calibers.
It is a response to Forster customers' feedback regarding the standard long handle, offering a more suitable option for certain reloading tasks.
The short handle is easy to install and comes with a comfortable ball fitting on the end for a better grip.

SINCLAIR INTERNATIONAL HAND DIE ARBOR PRESS
SINCLAIR ARBOR PRESS

SINCLAIR INTERNATIONAL

Reordered

£169.90 *

Single Stage Presses

The Sinclair Arbor Press is specifically designed for use with hand dies and does not require clamping for operation.
It features a solid stainless steel post and a stainless steel rack and pinion, ensuring quality and reliability for neck sizing and bullet seating.
The press includes a ratchet style height adjustment knob for easy head position changes and is also available as part of a hand die reloading kit.

2.8

🎯 Upgrade your reloading setup with the FORSTER CO-AX Press Model B5 with 'S' Jaws! 🔄 Perfect for precision single-stage presses. Get started now! 🔥

FORSTER PRODUCTS, INC. CO-AX PRESS WITH "S" JAWS, MODEL B5
CO-AX RELOADING PRESS

FORSTER PRODUCTS, INC.

In stock

£489.90 *

Single Stage Presses

4.7

🎯 Elevate your reloading setup with the MEC Marksman Press Base! Made in the USA for enhanced visibility & organization. 🇺🇸 Get started on a cleaner reloading space!

MEC RELOADING MARKSMAN PRESS BASE
MARKSMAN PRESS BASE

MEC RELOADING

In stock

£74.90 *

Reloading Press Accessories

The Marksman Press Base easily bolts to the MEC Marksman reloading press for quick installation.
It raises the press to improve visibility and clearance while also providing a place to hold reloading dies.
This accessory helps maintain a clean and organized reloading area and is made in the USA by MEC Reloading.

MEC RELOADING MARKSMAN SINGLE STAGE PRESS
MARKSMAN SINGLE STAGE RELOADING PRESS

MEC RELOADING

In stock

£364.90 *

Single Stage Presses

The Marksman single stage reloading press is made of durable ductile cast iron and offers high-quality reloading.
Features a patent-pending self-centering shell holder for enhanced accuracy and consistency in reloading.
Compatible with a wide range of dies and calibers, and can reload from .22 Hornet up to .416 Rigby, making it highly versatile.

🔫 Get precision reloading with the LEE LOAD-ALL II, 12 Gauge Shotgun Presses! Includes 24 bushings, built-in primer catcher & easy gauge conversion. Shop now! 🎯

LEE PRECISION LEE LOAD-ALL II, 12 GAUGE
LOAD-ALL II SHOTGUN PRESSES

LEE PRECISION

In stock

£114.90 * £109.90 - £114.90*

Shotshell Presses

Includes twenty-four shot and powder bushings for free.
Features a built-in primer catcher with a convenient front-access door.
Allows for easy and economical gauge conversion, adjustable for 2 3/4" to 3" shells.

4.7

Reloading Presses - More...

Reloading Equipment - Shellholders & Shellplates

LEE PRECISION LEE AUTO PRIME SHELLHOLDER #2
AUTO PRIME SHELLHOLDERS

LEE PRECISION

In stock

£12.90 * £9.90 - £12.90*

Shellholders & Shellplates

RCBS SHELLHOLDER #3
SHELLHOLDERS

RCBS

In stock

£18.90 * £14.90 - £19.90*

Shellholders & Shellplates

REDDING BUSHING STORAGE BOX (15)
BUSHING STORAGE BOX (15)

REDDING

Reordered

£12.90 *

Shellholders & Shellplates

LYMAN #2 SHELLHOLDER
SHELLHOLDERS

LYMAN

In stock

£18.90 * £17.90 - £18.90*

Shellholders & Shellplates

The LYMAN #2 Shellholder fits a wide range of calibers including .22/250, .25-06 REM, .270 WIN, .308 WIN, and .30-06 among others.
LYMAN offers additional shellholders such as #12 and #13 for various other calibers, including 9MM Luger and 7MM REM Mag.
The product falls under the main category of Shellholders & Shellplates, essential for reloading presses and compatible with specific cartridges like 243 Winchester and 22-250 Remington.

LEE PRECISION LEE PRO 1000 SHELL PLATE #4
PRO 1000 SHELL PLATES

LEE PRECISION

In stock

£25.90 *

Shellholders & Shellplates

REDDING #4 COMPETITION SHELLHOLDER SET
COMPETITION SHELLHOLDER SETS

REDDING

In stock

£104.90 * £12.90 - £104.90*

Shellholders & Shellplates

Redding's Competition Shellholder Set includes five pieces with thicknesses ranging from +.002" to +.010" to adjust headspace accurately.
Each shellholder in the set is marked and finished with black oxide to differentiate from standard shellholders.
The set comes with a storage box that has space for the five shellholders plus one additional regular shellholder.

3.3

Shellholders & Shellplates - More...

Reloading Equipment - Stuck Case Removers

BROWNELLS .223 BROKEN SHELL EXTRACTOR
BROKEN SHELL EXTRACTOR

BROWNELLS

In stock

£29.90 * £29.90 - £49.90*

Stuck Case Removers

The BROKEN SHELL EXTRACTOR is a hardened steel tool designed to easily remove broken cases from firearms chambered for .223/5.56 NATO or .308/7.62 NATO cartridges.
It features an exclusive, adjustable threaded two-piece design that ensures the tool fully engages with the case mouth and prevents slipping or stripping.
Usage is straightforward: insert the extractor into the chamber with the broken case, close the bolt to engage, and then retract the bolt to eject the broken case along with the tool.

4.8

RCBS STUCK CASE REMOVER
STUCK CASE REMOVER

RCBS

In stock

£32.90 *

Stuck Case Removers

4.7

🔧 Remove jammed cases effortlessly with the FORSTER PRODUCTS Stuck Case Remover! Hardened for durability, it even handles cases with stuck rods. Learn more! 🔩🛠️

FORSTER PRODUCTS, INC. STUCK CASE REMOVER
STUCK CASE REMOVER

FORSTER PRODUCTS, INC.

In stock

£33.90 *

Stuck Case Removers

Forster's stuck case remover is designed to work on most sizing dies, including those with the decapping rod and expander ball stuck in the die.
The remover is simple and inexpensive, making it an accessible tool for reloaders facing stuck cases.
All components of the remover are hardened for durability, and it includes a washer to protect the top of the die during use.

REDDING STUCK CASE REMOVAL KIT
STUCK CASE REMOVAL KIT

REDDING

In stock

£41.90 *

Stuck Case Removers

SINCLAIR INTERNATIONAL STUCK CASE REMOVER
SINCLAIR STUCK CASE REMOVAL TOOL

SINCLAIR INTERNATIONAL

Reordered

£27.90 *

Old price £32.75

Stuck Case Removers

The Sinclair Stuck Case Removal Tool is designed to safely extract a stuck case from a sizing die without damaging the die.
To use the tool, remove the die from the press, back out the decapping pin, and then drill and tap the primer pocket and flash hole.
The tool works by screwing into the tapped hole and using a 3⁄16" hex head wrench to tighten a cap screw, which pulls the case out.

Stuck Case Removers - More...

Reloading Equipment - Bullet Casting

LYMAN 10 LB CAST IRON LEAD POT
10 LB. CAST IRON LEAD POT

LYMAN

In stock

£41.90 *

Casting Furnaces & Accessories

The LYMAN 10 LB CAST IRON LEAD POT is designed for melting lead and features a 10 lb. capacity.
It includes an anti-drip pour spout, a flat bottom for stability, and a heavy-duty handle for safety.
Users should be aware of the health risks associated with lead exposure, including birth defects and cancer.

New

LEE PRECISION .510" CLASSIC BULLET SIZE KIT
CLASSIC BULLET SIZING KIT

LEE PRECISION

In stock

£29.90 * £29.90 - £31.90*

Lube & Sizer Dies | Handgun Moulds

BROWNELLS MARVELUX® BULLET CASTING FLUX 4LB
MARVELUX® BULLET CASTING FLUX

BROWNELLS

In stock

£64.90 * £17.90 - £224.90*

Solders & Flux | Casting Furnaces & Accessories

4.2

LYMAN SIZING DIE .452 DIAMETER
BULLET SIZING DIES

LYMAN

In stock

£47.90 *

Lube & Sizer Dies

Sizing dies have 90° hole spacing for easy bullet lubrication, even with hard lubricants.
Features a tapered mouth and hardened internal surface for perfect cylindrical bullet shaping.
Use of this product involves exposure to lead, which poses health risks.

LEE PRECISION 44 CALIBER (0.429") 200GR FN 6-CAVITY MOLD
6 CAVITY HANDGUN MOULDS

LEE PRECISION

In stock

£69.90 * £59.90 - £69.90*

Handgun Moulds | Rifle Moulds

The Lee Precision mould is designed for high volume production with durable steel bushings and alignment pins for precision.
It features a cam operated sprue plate to avoid pounding and has hard anodized wave washers for secure fastening.
The mould blocks are aluminum with CNC machined cavities for superior roundness and size control, but handles are not included.

BROWNELLS SUPERHARD BULLET CASTING ALLOY 5LB INGOT
SUPERHARD (70% LEAD, 30% ANTIMONY) BULLET CASTING ALLOY

BROWNELLS

In stock

£41.90 *

Lead Alloy

Brownells Superhard Bullet Casting Alloy consists of 70% Lead and 30% Antimony, designed to harden recovered lead.
The alloy ingots weigh approximately 5 pounds and melt at around 745° F, with the exact Brinell hardness not specified.
Superhard is made from virgin metals for a clean alloy addition and is sold in ingot form with approximate weights.

Bullet Casting - More...

Reloading Equipment - Benches

LEE PRECISION LEE RELOADING STAND
RELOADING STAND

LEE PRECISION

In stock

£344.90 *

Benches

The RELOADING STAND LEE PRECISION is ideal for reloaders with limited space, providing a sturdy, powder-coated steel stand at an optimal working height.
Features a three-leg design for stability on any surface, a thick steel top with the Lee Bench Plate System, and a lower steel shelf for additional storage.
Comes with one storage bin and has multiple mounting holes on each leg for extra bins, shelves, or racks to customize the stand to your needs.

LEE PRECISION LEE STEEL BASE BLOCK
BENCH PLATE STEEL BASE BLANK

LEE PRECISION

In stock

£24.90 *

Benches

The Lee Steel Bench Block is compatible with the Lee Bench Plate system and the Lee Reloading Stand.
It is made of thick steel with a black powder-coated finish and has integral tabs for secure placement.
The block includes mounting holes for all current Lee Presses and comes with hardware for mounting one press.

LEE PRECISION LEE BENCH PLATE
BENCH PLATE KIT

LEE PRECISION

Reordered

£54.90 *

Benches

Lee Bench Plate enables quick press removal without the need to unbolt it from the bench.
Includes a steel base block compatible with all current Lee metallic presses and special elevator bolt hardware.
Features a powder-coated, thick steel design that mounts securely to any bench or tabletop, enhancing bench top rigidity.

Benches - More...

Reloading Equipment - Reloading Kits

LEE PRECISION LEE BREECH LOCK CHALLENGER PRESS KIT
BREECH LOCK CHALLENGER KIT

LEE PRECISION

In stock

£249.90 *

Reloading Kits

The kit includes a Breech Lock Challenger Press with a quick-change bushing, along with a variety of tools such as the Perfect Powder Measure, Lee Safety Scale, and Auto-Prime XR.
Its "O" frame design has a 4 1/2" opening and utilizes the Breech Lock quick change die system for efficient operation.
Constructed from solid aluminum, the press is designed to work with standard 7/8"-14 threaded dies and features an effective spent primer tube for easy disposal.

3.7

LEE PRECISION LEE 4 HOLE TURRET PRESS KIT
VALUE 4-HOLE TURRET PRESS KIT

LEE PRECISION

In stock

£459.90 *

Reloading Kits

The LEE Precision Value 4-Hole Turret Press Kit enables quick production of top-quality handgun ammo and accommodates large rifle cases, with easy caliber changes.
Kit includes Turret Press, Auto Disk Powder Measure, Safety Scale, primer pocket cleaner, cutter, lock stud, chamfer tool, and requires Lee Dies for handgun reloading.
Press can be used as a single station with a disable feature for the auto index and requires additional purchases for rifle reloading of cartridges over 2.3125 inches.