Enhance your shooting experience with the RUGER PC CARBINE VORTEX VIPER/VENOM SIGHT MOUNT.
The EGW RUGER PC CARBINE VORTEX VIPER/VENOM SIGHT MOUNT is designed to provide a secure and reliable platform for your red dot sights, ensuring optimal accuracy and performance.
Product Specifications:
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.811"
- Overall Width: .99"
- Mounting Hardware:
- (2) 6-32 Button Head Screws
- (2) 6-32 Flat Head Screws
- (1) 6-32 Set Screw
- Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter
Installation Instructions:
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Included Hardware:
- 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
- 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws that are included with this mount require a 5/64'' allen wrench for installation.
*Note: EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. You can take our mount off and replace your rear sight at any time. Mounting hardware included.