EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Ruger M77 Short Action Hunter Ruger M77 Short Action Long Range Hunter Ruger M77 Short Action Long Range Target
More...
94.994.92GBP
Product no.: 296000754 EGW RUGER M77 HAWKEYE SA 1-PIECE PICATINNY BASE 0 MOA Mfr Part: 80460841370112142 EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Ruger M77 Short Action Hunter Ruger M77 Short Action Long Range Hunter Ruger M77 Short Action Long Range Target
EGW's Picatinny rail for the Ruger M77 Hawkeye is fully machined and designed for flexibility in mounting scopes and accessories, with a center channel to maintain use of factory iron sights and reduce weight.
For installation, EGW advises using 20 inch lbs of torque and a drop of blue loctite, and offers rails with 0 MOA for up to 500 yards shooting and 20 MOA for 500-1000 yards.
The mount is made in the USA from aluminum, finished with Type III anodizing for durability, and is compatible with Ruger M77 Short Action models.
Attributes
Action Type:
Short
Colour:
Black
Elevation:
0 MOA
Make:
Ruger
Material:
Aluminum
Model:
M77 Hawkeye Compact
Number of Bases:
1-Piece
Style:
Picatinny Rail
Delivery weight: 0.084kg
Item details
Made in USA
Product no.: 296000755 EGW RUGER M77 HAWKEYE SA 1-PIECE PICATINNY BASE 20 MOA Mfr Part: 80462841370117406 EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Ruger M77 Short Action Hunter Ruger M77 Short Action Long Range Hunter Ruger M77 Short Action Long Range Target
EGW's Picatinny scope mount is designed for Ruger M77 Hawkeye short-action rifles, offering flexibility with full-length cross slots for mounting scopes and accessories.
The mount features a 20 MOA elevation ideal for long-range shooting and is made from durable anodized aluminum.
Before installation, EGW advises verifying hole spacing on the rifle receiver matches their mount dimensions, and recommends using 20 inch lbs of torque and blue loctite for secure attachment.
Attributes
Action Type:
Short
Colour:
Black
Elevation:
20 MOA
Make:
Ruger
Material:
Aluminum
Model:
M77 Hawkeye Compact
Number of Bases:
1-Piece
Style:
Picatinny Rail
Delivery weight: 0.086kg
Item details
Made in USA
🎯 Enhance your Ruger M77 with the EGW Hawkeye SA Picatinny Scope Mount! Durable aluminum, 0 MOA elevation 🇺🇸 Made in USA. Get precision now! 🔍🛠️
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Ruger M77 Short Action Hunter Ruger M77 Short Action Long Range Hunter Ruger M77 Short Action Long Range Target