Machined Billet Housing Drops In For Precise, Consistent Trigger Pull
Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. Ship wt. 2 lb.
More...
Customer ratings for VOLQUARTSEN FITS .22 LONG RIFLE, SILVER
Number of ratings: 7
From brownells.com: 7
Average rating: 4.4
Great Drop-in Trigger(28/02/2013)
No instructions, but trigger module installs just like the Timney Trigger Module except this one has no allenhead screws to install or adjust. Volquartsen may have instructions on their website, but I could not find any. Anyway, an easy install and a super light, smooth trigger for a Ruger 10/22! Brownells Tech Support is always helpful too. I would not hesitate to recommend this trigger to anyone wanting to dramatically improve their stock Ruger 10/22 trigger.
GREAT TRIGGER(10/07/2013)
SUPER EASY to install, GOOD RESULTS should have replaced it earlier.
Excellent Drop-in(18/04/2010)
This will give you the nicest trigger you have ever experienced in a 10/22. Light, crisp, no overtravel. Huge upgrade and well worth the money
Dramaticaly over priced & dissapointing(22/09/2010)
I was very excited to receive this part because it completed a bench rest gun I was building. before I got this part, I was using a Standard trigger group from Ruger with a trigger job & extended mag release. Once I used the Volquarsen trigger group, I realized it didn't do anything my standard trigger group didn't do. Trigger pull wasn't any better, accuracy wasn't better, and IMHO it didn't look any better. In addition, a few of the pins holding the group together were very loose and kept falling out. lastly, the ejector had to be filled down in order for the gun to function reliably. Not what I expected on a drop in unit.
I would recommend anyone wanting a nice trigger group for a 10/22 simply buy a new Ruger factory group, add an extended mag release and have a competent gunsmith do a trigger job on it.
fantastic(01/10/2011)
It arrived, it fit easily and it created a trigger easily as good as many of my bolt action target rifles. AMAZING
Not cheap but it is just so good, I would have at least 5000 rounds through mine now and it has never changed, crisp and light with a short return for fast follow up. Totally reliable.
I have bought a number of products from Volquartsen and their production quality has always been great. I hesitated on this item as it is expensive but it is truly woht the $ once installed.
Excellent drop in replacement..(06/04/2012)
Perfect fit and crisp break, one of the best triggers I have. I will buy another one.
I was surprised(29/03/2013)
How I use the product: I have been building and shooting the 10/22 for several years. I recently purchased the Volquartsen trigger to build a target rifle. I have been able to easily shoot 250 yards and hit my targets. I was able to do so with the stock trigger but the new unit has taken my shooting and accuracy to an entire new level. Before I was using luck to hit my target in regards to the trigger consistency; now I have a sure thing each and every time I pull the trigger. Consistency is an important thing for me and this trigger delivers it each and every pull.
Things that are great about the product: I have been looking for a new trigger for many months if not years and I recently decided to purchase the Volquartsen trigger for my 10/22. I was somewhat concerned about the negative review posted on this site but chose to follow my gut and purchase it anyways. Once it arrived I immediately stripped down my rifle and put this one in. The unit was a direct replacement from the factory unit it replaced. I was even able to use my Tactical Solutions extended magazine release one this new unit. The trigger pull is a night and day difference. Major improvements compared to the factory set up. I experienced a light, clean and smooth trigger break that had little to no creep straight out of the box. This unit does have adjustments to reduce the creep even more, but I have found it unnecessary due to great settings already. I also found the new trigger to be wider for my finger to allow better finger to trigger feel and placement. This was a nice feature to enhance the comfort of the shooter. The auto bolt release is another nice feature they've added. The factory bolt release was a chore (at times) to release, Volquartsen upgraded this so a simple pull back of the bolt and it will close and function normally. This isn't a huge time saver but it is nice none the less. Overall this is a great product and I WILL purchase another one on my next build!
Things that are not so great about the product: I had little to say about the negatives on this product. Like any quality trigger, you're going to spend some money. The one issue I did have: the pins that hold the internals (springs, hammer, etc.) in were somewhat loose and attempted to fall out while the unit was out of the gun and tipped on its side. This was not an issue once installed on the gun but found it noteworthy for my review.
Product no.: 930000003 VOLQUARTSEN FITS .22 LONG RIFLE, SILVER Mfr Part: VCTP-1-S-10810162010911 Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 930000001 VOLQUARTSEN FITS .22 LONG RIFLE, BLACK Mfr Part: VCTP-1-B-10810162010904 Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
374.9GBP11£374.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 430103485 VOLQUARTSEN TG2000 DROP-IN REPLACEMENT TRIGGER FOR RUGER 10/22 FDE Mfr Part: VCTP-1-FDE-10810162017798 Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 430103497 VOLQUARTSEN TG2000 DROP-IN REPLACEMENT TRIGGER FOR RUGER 10/22 OD GREEN Mfr Part: VCTP-1-OD-10810162013615 Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your RUGER® 10/22® with the precision Volquartsen Trigger Guard for a crisp pull and enhanced performance. 🎯 Perfect fit for .22 long rifle!
Machined Billet Housing Drops In For Precise, Consistent Trigger Pull
Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.
SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. Ship wt. 2 lb.
More...
Customer ratings for VOLQUARTSEN FITS .22 LONG RIFLE, SILVER
Number of ratings: 7
From brownells.com: 7
Average rating: 4.4
Great Drop-in Trigger(28/02/2013)
No instructions, but trigger module installs just like the Timney Trigger Module except this one has no allenhead screws to install or adjust. Volquartsen may have instructions on their website, but I could not find any. Anyway, an easy install and a super light, smooth trigger for a Ruger 10/22! Brownells Tech Support is always helpful too. I would not hesitate to recommend this trigger to anyone wanting to dramatically improve their stock Ruger 10/22 trigger.
GREAT TRIGGER(10/07/2013)
SUPER EASY to install, GOOD RESULTS should have replaced it earlier.
Excellent Drop-in(18/04/2010)
This will give you the nicest trigger you have ever experienced in a 10/22. Light, crisp, no overtravel. Huge upgrade and well worth the money
Dramaticaly over priced & dissapointing(22/09/2010)
I was very excited to receive this part because it completed a bench rest gun I was building. before I got this part, I was using a Standard trigger group from Ruger with a trigger job & extended mag release. Once I used the Volquarsen trigger group, I realized it didn't do anything my standard trigger group didn't do. Trigger pull wasn't any better, accuracy wasn't better, and IMHO it didn't look any better. In addition, a few of the pins holding the group together were very loose and kept falling out. lastly, the ejector had to be filled down in order for the gun to function reliably. Not what I expected on a drop in unit.
I would recommend anyone wanting a nice trigger group for a 10/22 simply buy a new Ruger factory group, add an extended mag release and have a competent gunsmith do a trigger job on it.
fantastic(01/10/2011)
It arrived, it fit easily and it created a trigger easily as good as many of my bolt action target rifles. AMAZING
Not cheap but it is just so good, I would have at least 5000 rounds through mine now and it has never changed, crisp and light with a short return for fast follow up. Totally reliable.
I have bought a number of products from Volquartsen and their production quality has always been great. I hesitated on this item as it is expensive but it is truly woht the $ once installed.
Excellent drop in replacement..(06/04/2012)
Perfect fit and crisp break, one of the best triggers I have. I will buy another one.
I was surprised(29/03/2013)
How I use the product: I have been building and shooting the 10/22 for several years. I recently purchased the Volquartsen trigger to build a target rifle. I have been able to easily shoot 250 yards and hit my targets. I was able to do so with the stock trigger but the new unit has taken my shooting and accuracy to an entire new level. Before I was using luck to hit my target in regards to the trigger consistency; now I have a sure thing each and every time I pull the trigger. Consistency is an important thing for me and this trigger delivers it each and every pull.
Things that are great about the product: I have been looking for a new trigger for many months if not years and I recently decided to purchase the Volquartsen trigger for my 10/22. I was somewhat concerned about the negative review posted on this site but chose to follow my gut and purchase it anyways. Once it arrived I immediately stripped down my rifle and put this one in. The unit was a direct replacement from the factory unit it replaced. I was even able to use my Tactical Solutions extended magazine release one this new unit. The trigger pull is a night and day difference. Major improvements compared to the factory set up. I experienced a light, clean and smooth trigger break that had little to no creep straight out of the box. This unit does have adjustments to reduce the creep even more, but I have found it unnecessary due to great settings already. I also found the new trigger to be wider for my finger to allow better finger to trigger feel and placement. This was a nice feature to enhance the comfort of the shooter. The auto bolt release is another nice feature they've added. The factory bolt release was a chore (at times) to release, Volquartsen upgraded this so a simple pull back of the bolt and it will close and function normally. This isn't a huge time saver but it is nice none the less. Overall this is a great product and I WILL purchase another one on my next build!
Things that are not so great about the product: I had little to say about the negatives on this product. Like any quality trigger, you're going to spend some money. The one issue I did have: the pins that hold the internals (springs, hammer, etc.) in were somewhat loose and attempted to fall out while the unit was out of the gun and tipped on its side. This was not an issue once installed on the gun but found it noteworthy for my review.