Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

The Brownells Roll Pin Punch Set features 19 durable steel punches and a bench block, ensuring precise installation and removal of roll pins without damage.

BROWNELLS STANDARD ROLL PIN PUNCH BENCH SET

050806109407 080000651
Variations
Filters:
Variations:

Variations:

ROLL PIN PUNCH SET - STANDARD ROLL PIN PUNCH BENCH SET
199.9 GBP 0 £199.90 *
Backorderable
Material: Steel Style: Set, Roll Pin Quantity: 20 Product no.: 080000651
Backorderable
199.9 GBP 0 £199.90 *
ROLL PIN PUNCH SET - STANDARD ROLL PIN BENCH BLOCK ONLY
21.9 GBP 0 £21.90 *
Backorderable
Product no.: 080000650
Backorderable
21.9 GBP 0 £21.90 *
21.9 199.9 2 GBP
199.9 GBP £199.90

Prices inclusive of duty & VAT.

Product no.: 080000651

050806109407 We combined 19 of our most popular roll pin punches and added a handy bench block to come up with the perfect punch set for the busy shop or department armor. Easily start, remove, and install spring pins and roll pins in firearms without damage to the pin or firearm. Features (5) holder punches, (7) starter punches, and (7) standard punches that can easily handle any job out there. Made from solid steel, with parallel-ground shanks and knurled handles. Also includes a non-marring, nylon drift punch that won’t damage or scrape delicate surface finishes. Machined, Delrin® bench block holds and organizes all the punches for easy access. Holder punches cup and hold roll pins, keeping them aligned for easy starting without pinching or binding. Especially good on the tiny, hard-to-grab ones, or those in tight places. Features a 1/16" diameter punch that is notched to clear the M16/AR-15 rear sight, plus a 3.5mm diameter punch for holding the pin that retains the breech block on Sig handguns. Finish driving with a standard roll pin punch. Starter punches are used to start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft gives more control by putting your hand closer to the pin and prevents bending the longer, standard roll pin punches. Standard punches are used to finish drive the roll pin or spring pin after it’s started. Starter and standard roll pin punches feature a special tip that centers inside the hollow pin to help prevent slippage. Complete set includes bench block, also available separately.
Backorderable
1
2
3
4
5
6
7
8
9
10+
£199.90

Prices inclusive of duty & VAT.

1
2
3
4
5
6
7
8
9
10+

Backorderable, delivery time approx. 4-12 weeks from the USA warehouse.

Backorderable, delivery time approx. 4-12 weeks from the USA warehouse.

No charges until we ship
No charge:
Your credit card will not be charged when you place your order.

No commitments:
You are under no obligation until the goods are shipped. You can cancel your order at any time before shipping - free of charge.

Not until shipping:
Your credit card will only be charged once we ship your order. Not before.
  • Professional roll pin installation
  • Includes handy bench block
  • Durable solid steel construction
21.9 199.9 2 GBP
Description Specification Customers reviews Accessories

BROWNELLS STANDARD ROLL PIN PUNCH BENCH SET

199.9 GBP £199.90

Prices inclusive of duty & VAT.

1
2
3
4
5
6
7
8
9
10+
£199.90

Prices inclusive of duty & VAT.

1
2
3
4
5
6
7
8
9
10+

Backorderable, delivery time approx. 4-12 weeks from the USA warehouse.

Description:

Effortlessly Remove & Install Roll Pins Like a Pro

Introducing the ROLL PIN PUNCH SET from BROWNELLS, a comprehensive solution for all your roll pin needs. This set combines 19 of our most popular roll pin punches with a convenient bench block, making it the ideal choice for busy shops and department armourers.

Key Features:

  • Easily start, remove, and install spring pins and roll pins in firearms without damaging the pin or the firearm.
  • Includes (5) holder punches, (7) starter punches, and (7) standard punches to tackle any job.
  • Constructed from solid steel with parallel-ground shanks and knurled handles for a secure grip.
  • Features a non-marring, nylon drift punch that protects delicate surface finishes.
  • Machined Delrin® bench block holds and organizes all punches for easy access.
  • Holder punches cup and hold roll pins, ensuring they stay aligned for easy starting.
  • Specialized 1/16" diameter punch clears the M16/AR-15 rear sight; 3.5mm diameter punch holds the pin for the breech block on Sig handguns.

Enhanced Control and Precision

The short shaft design provides better control by bringing your hand closer to the pin, preventing the bending of longer standard roll pin punches. Starter punches initiate the removal of roll or spring pins without causing damage, while standard punches finish the drive after the pin has been started. Both starter and standard roll pin punches feature a special tip that centres within the hollow pin, helping to prevent slippage.

Complete Set and Specifications:

Each set includes a bench block and is also available separately. Here’s what you can expect:

  • Punches: Steel, knurled handle, matte black.
  • Nylon Punch: 4” (10cm) long x 5/16" (7.9mm) diameter.
  • Holder Punches: (1) of each diameter: 1/16" (1.6mm), 5/64" (2mm), 3/32" (2.4mm), 1/8" (3.2mm), 9/64" (3.5mm).
  • Working Length: 2½” (6.3cm) - 3” (7.6cm).
  • Starter Punches: (1) of each diameter: #1, 1/16"; #2, 4/64"; #3, 3/32"; #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm).
  • Working Length: ½” (3.2cm).
  • Standard Punches: (1) of each diameter: #1, 1/16"; #2, 5/64"; #3, 3/32"; #4, 1/8"; #5, 5/32"; #6, 3/16"; #7, 7/32".
  • Working Length: 15/16" (2.4cm) - 2½” (6.4cm).
  • Bench Block: Delrin, tan, 6-3/8" (16cm) long, 3” (7.6cm) wide, ¾” (1.9cm) high. Holds all 20 punches.

Upgrade your gunsmithing toolkit with the BROWNELLS ROLL PIN PUNCH SET and experience the difference in quality and precision!



Attributes

  • Material:
    Steel
  • Style:
    Roll Pin
    ,
    Set
  • Quantity: 20
  • Delivery weight: 0.794kg
  • Shipping height: 84mm
  • Shipping width: 112mm
  • Shipping length: 249mm
  • UPC: 050806109407

Item details

Made in USA

Customers reviews

Customer ratings (10)

2.7 / 5
Recommended

Brownells USA Works 30/03/2017

I needed to drill out the holes to accommodate all my punches, other than that it works.

Slightly recommend

Brownells USA Light Use Maybe 04/11/2016

I have used several types of punches to work on firearms. These punches, simply put did not stand up to regular use on rifles. Initially, they were fine, however in the period of about a year they began chipping and bending. If you are a light user of these types of punches they may last for quite some time, however I would not recommend them for professional use. They appear to have a nice finish and weight, I found the punch holder useful. To sum it up; you get what you pay for, especially in hardened type tools.

Variations:

ROLL PIN PUNCH SET - STANDARD ROLL PIN PUNCH BENCH SET
199.9 GBP 0 £199.90 *
Backorderable
Material: Steel Style: Set, Roll Pin Quantity: 20 Product no.: 080000651
Backorderable
199.9 GBP 0 £199.90 *
ROLL PIN PUNCH SET - STANDARD ROLL PIN BENCH BLOCK ONLY
21.9 GBP 0 £21.90 *
Backorderable
Product no.: 080000650
Backorderable
21.9 GBP 0 £21.90 *

Oops! Something went wrong.

We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.

Back to top