Your basket is empty.

Basket

01788 815115

Newsletter

VANG COMP SYSTEMS
REMINGTON 870/11-87 12GA STAINLESS STEEL FOLLOWER

100002463

Description
Ratings (10)

Strong, Dependable Replacement For Factory Followers

High-visibility stainless steel follower replaces the factory follower in Remington 870 and 11-87 shotguns. These are turned from a solid piece of stainless-steel bar-stock. This multitasking replacement for your factory-installed magazine follower travels smoother in your magazine tube due to its reduced bearing surface. Won’t break under spring pressure, won’t rust and holds up to years of shooting. Bright stainless steel makes it easy to see how many rounds are left in the magazine tube. Ribbed side and drilled out center hole reduce weight without jeopardizing overall strength. These followers are a slotted design. Available in 12 gauge.

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

More...

Customer ratings for VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS

Number of ratings: 10
From brownells.com: 10
Average rating: 4.9

Vang Comp Follower (04/03/2010)

Got this for my M930spx, Got rid of the cheapo plastic safety and the plastic follower with the VC stainless one. Just takes the doubt out of your combat weapon. A few less things for Murphy to mess with.

S/S Follower for Mossberg 590A1! (27/11/2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27/08/2011)

Excellent product. The SS follower was easy to replace the factory follower. The quality difference between the original factory follower and this follower is significant. The original was plastic, bright yellow, and flimsy in the tactical 870 I purchased. At the time of purchase I didn't know the tactical 870 was built on the express line of 870's. This replacement is just one of the many additions that needs to be done in order to make the express a more reliable gun.

Very nice. Very high quality. (23/09/2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27/06/2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24/04/2013)

I installed this a few days ago and it is smoother to load shells. You will have to grind off the two demples in the mag tube before incerting the follower. This was no problem using a dremel type tool.

Great Replacement (05/05/2013)

The old original follower was black plastic, could not see it, this one is bright SS, you can tell instantly when the tube is empty.

Excellent Follower (23/05/2015)

Overall this follower is great and highly recommended. It functions so much smoother than the original plastic garbage that comes with the 870. It is important to note that if your 870 have the dimples on the magazine tube, they need to be removed before you can use this follower (by either grinding them off or pressing them out with the proper tool). It is also important to note that this follower will hang up if you're using a tube extension and there is any kind of gap between the guns tube and the extensions tube. If you use a 2 piece tube extension design (tube and nut separate pieces like the Remington branded extensions) be sure to screw your extension all the way down until it contacts the guns tube and then torque the nut. Tube extensions with the nut built onto them (Nordic, Carlsons, Choat, etc) may have problems with this follower (or any other aftermarket follower). If you're not comfortable working on guns, then have a qualified gunsmith fit this part and remove the tube dimples for you.

Not much to say, it just works. (15/11/2016)

Not much to say about this one. It just works. Vang comp is now offering followers that are slotted for dimpled 870s. I have the brownells stainless follower in one 870 and this one in another. I prefer the vang comp because of the hole that is easy to feel when wearing gloves but they are both quality and reliable.

Great product (23/04/2017)

Have this follower in my 870 for sometime with zero issues. Quality, fit and finish is what I expect from Hans Vang and he has not let me

Down. It's a great product, easy to see and feel if wearing gloves, very smooth in the feed tube. You can't go wrong upgrading from

Cheap plastic follower that the Remington 870 comes with to the Vang.

Read 10 more ratings on brownells.com

19.9 19.9 1 GBP

Product no.: 100002463
VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS
Mfr Part: NONE High-visibility stainless steel follower replaces the factory follower in Remington 870 and 11-87 shotguns. These are turned from a solid piece of stainless-steel bar-stock. This multitasking replacement for your factory-installed magazine follower travels smoother in your magazine tube due to its reduced bearing surface. Won’t break under spring pressure, won’t rust and holds up to years of shooting. Bright stainless steel makes it easy to see how many rounds are left in the magazine tube. Ribbed side and drilled out center hole reduce weight without jeopardizing overall strength. These followers are a slotted design. Available in 12 gauge.

19.9 GBP 0 £19.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Gauge: 12 Gauge Make: Remington Model: 11-87, 870

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

High-visibility stainless steel follower designed for Remington 870 and 11-87 12 gauge shotguns, enhancing reliability and ease of counting remaining rounds.
Constructed from solid stainless-steel bar-stock for durability, resistance to rust, and immunity to breakage under spring pressure.
Features a ribbed side and drilled center to reduce weight without compromising strength, and a slotted design for smoother travel in the magazine tube.

Attributes

Gauge: 12 Gauge Make: Remington Model: 11-87,870 Delivery weight: 0.005kg

Item details

Made in USA

Upgrade your Remington 870/11-87 with a Stainless Steel Follower from VANG COMP SYSTEMS 🌟 Enhanced visibility & durability for 12GA shotguns. Get yours now! 🔫

Description
Ratings (10)

Strong, Dependable Replacement For Factory Followers

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

More...

Customer ratings for VANG COMP SYSTEMS REMINGTON 870/11-87 12 GAUGE FOLLOWER, STAINLESS

Number of ratings: 10
From brownells.com: 10
Average rating: 4.9

Vang Comp Follower (04/03/2010)

S/S Follower for Mossberg 590A1! (27/11/2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27/08/2011)

Very nice. Very high quality. (23/09/2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27/06/2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24/04/2013)

Great Replacement (05/05/2013)

The old original follower was black plastic, could not see it, this one is bright SS, you can tell instantly when the tube is empty.

Excellent Follower (23/05/2015)

Not much to say, it just works. (15/11/2016)

Great product (23/04/2017)

Read 10 more ratings on brownells.com

Customers also bought
Alternative items

🔄 Upgrade your reloading setup with the FORSTER #3 Collet for Original & Power Case Trimmer! Perfect for 30-40 Krag & 30 Carbine. Shop now for precision case trimming! 🔧

FORSTER PRODUCTS, INC. COLLET #3 FOR ORIGINAL & POWER CASE TRIMMER
ORIGINAL CASE TRIMMER COLLETS

FORSTER PRODUCTS, INC.

In stock

£21.90 *

Case Trimmer Collets

OUTDOOR CONNECTION RAZOR SLING
RAZOR™ SLING

OUTDOOR CONNECTION

In stock

£19.90 *

Slings

MAGPUL 870 SGA BUTTSTOCK, BLACK
SHOTGUN SGA BUTTSTOCKS

MAGPUL

Reordered

£139.90 *

Buttstocks

4.9

MTM CASE-GARD CAST BULLET BOX PISTOL 9MM LUGER-45 ACP 160 GREEN
PISTOL CAST BULLET BOX

MTM CASE-GARD

In stock

£9.90 *

Ammo Boxes

BUTLER CREEK OBJECTIVE LENS COVER #46,47 2.43-2.461" (61.7-62.5MM)
MULTI-FLEX FLIP-OPEN OBJECTIVE LENS COVERS

BUTLER CREEK

In stock

£17.90 *

Scope Lens Covers

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: