Your basket is empty.

Basket

01788 815115

Newsletter

LEE PRECISION PERFECT POWDER MEASURE

Perfect Powder Measure

Best for reloading rifle cases, can also be used for pistol cases Throws charges from 2 to over 100 grains Includes a sturdy steel stand for bench mounting Micrometer More...

Product no.: 100010145 734307900588 100010145

Description
Ratings (8)

Best for reloading rifle cases, can also be used for pistol cases Throws charges from 2 to over 100 grains Includes a sturdy steel stand for bench mounting Micrometer adjustable

More...

Customer ratings for Perfect Powder Measure

Number of ratings: 8
From brownells.com: 8
Average rating: 3.6

Pass (01/09/2012)

It leaks powder!
It's not too bad for rifle powders. Maybe drops a grain or two on your bench. But gets smaller pistol powders all over the place.

This is a great measure (17/09/2012)

This measure is great. it has a shut off so you can just twist the drum, throw the rest of the powder then empty the drum, no spills. Mine throws consistently +/- 0.1, it is more accurate than my chargemaster. Also, I cut the solid stop away to make it more accurate. By doing it, it allows the drum to completely close so powder doesnt bridge. But word of warning - cutting the stop away renders the measure unusable on a progressive press, but I dont have one, so not an issue for me. I bought one for my dad as well and his leaked at first, but i took it apart, washed it with soap and water, let it dry and coated the inside parts with powder graphite, no more leaks.

It ain't perfect but it may be the best (26/08/2013)

The dictionary definition of perfect is: "accurate, exact, or correct in every detail" and this does NOT describe the Lee "Perfect" Powder Measure.

That being said, based on reviews, it probably is the best available, especially at the price.

And that probably describes most of Lee Precision's reloading equipment and products. I use nothing but Lee and have for over 20 years. I think it is by far the best value on the market today.

I have used my Lee Perfect Powder Measure since I started reloading in 1992 and I've always had difficulty in getting consistent measures of powder thus requiring that I weigh every load. That, of course, slows down the entire reloading process. I've found that loads can vary as much as +/- 2 grains but usually are between +/-.05 and 1 grain. Since I rarely load maximum loads, this does not usually present a safety problem but it can cause a wide varience in in muzzle velocity and accuracy. At a particular setting I have never gotten more than four straight loads that were exactly the same.

Still, when you read the reviews of other similar products...some significantly more expensive...the Lee Perfect Powder Measure stands up well.

It would be wonderful (and fast) to be able to drop load after load with confidence that each one would perfectly match the last one or at a minimum be within +/- a half a grain. That doesn't seem to be possible with any powder measure. So, I continue with my Lee, weighing each load and getting consistent muzzle velocities as a result.

The stand used for bench mounting is strong but flexes noticably when the handle is pulled but it's held up for thousands of loads and is still going strong.

It is a quality product and it's easy to use and adjust. I would recommend it to any reloader.

Not so perfect, but still a good deal (05/10/2013)

I've used mine for almost 5 years. It works and is relatively accurate. I would say within +/- 2 about 80% of the time. Part of that is the human factor of inconsistent throws. One wouldn't think that how you throw the lever would cause a variation, but it does. So, I go for a lower output and then trickle the rest. For the money, it's a good deal. I don't think any other manual dispenser would do much better.

great value (06/11/2013)

Works perfect on most powders, wide charge im loadin 4.0gr 9mm and 30-06 with 52gr, only adjust the knob and there you go, also very accurate, i dont tap, knock the body, there is when you get diferent measures. smooth, no lick, a must have.
greeting from Argentina

Does what it's designed to do but..... (11/07/2014)

It's hard for me to criticize any LEE product. I started loading in 1967 after I fired my first box of store bought .45ACP target wadcutters. I bought the origonal LEE loader and loaded those same 50 pieces of brass no telling how many times. I still have them and the box they came in (just for old times sake) That old LEE loader was slow but it felt well made. Today, except for special situations I buy only LEE loading dies. I bought two of the current "perfect measures" just because they were LEE products and as far as I can tell they both accurately dispense charges. Problem is they are cramped and clumsy to operate and nothing you do will make them feel good when using them. I lubed the rotors with powdered graphite, ran hoppers of the dirtiest powder I had (Bullseye) through them, lightened up the tension screw 1/8 turn and made "maybe" a 10% improvement. Bottom line, I wish LEE made something between this $25.00 measure and my $250.00 Harrell with ball bearings! PS: Mine are very accurite IF I DO NOT double/tripple tap the up or dowh stroke.

VERY ACCURATE WORKS WELL (29/09/2015)

SET THE LEE PERFECT POWDER MEASURE UP ALONG SIDE MY OTHER( MUCH MORE EXPENSIVE) POWDER MEASURE ON THE BENCH AS A ALTERNATIVE TO AVOID HAVING TO CHANGE EVERYTHING FOR LOADING ANOTHER CALIBRE....THE BUILD QUALITY OF THE OTHER BRAND IS MUCH MORE ROBUST...APART FROM THAT BOTH WORK EQUALLY WELL DON'T FORGET THE PRICE VERATION YOU CAN BUY ABOUT FIVE LEES TO ONE OF THE OTHERS GREAT AS A BACK-UP......

Not suited for H110 (09/01/2018)

Looked great on paper, received as part of my 50th kit.

tried adjusting the tension screw and running a hopper full to coat as instructed but still leaks a lot. I've heard others mention it works better on other types of powder but this is pretty unusable for H110. Will have to look for another alternative.. shame b/c the remaining lee products all work fine

Read 8 more ratings on brownells.com

30.45 30.45 1 GBP

100010145
Perfect Powder Measure
Mfr Part: 90058 734307900588 Best for reloading rifle cases, can also be used for pistol cases Throws charges from 2 to over 100 grains Includes a sturdy steel stand for bench mounting Micrometer adjustable

30.45 GBP 38 £30.45 *

10+ In stock with Brownells USA. Delivery within 7-10 days

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Item details

Made in USA

Description
Ratings (8)

Best for reloading rifle cases, can also be used for pistol cases Throws charges from 2 to over 100 grains Includes a sturdy steel stand for bench mounting Micrometer adjustable

More...

Customer ratings for Perfect Powder Measure

Number of ratings: 8
From brownells.com: 8
Average rating: 3.6

Pass (01/09/2012)

It leaks powder!
It's not too bad for rifle powders. Maybe drops a grain or two on your bench. But gets smaller pistol powders all over the place.

This is a great measure (17/09/2012)

It ain't perfect but it may be the best (26/08/2013)

Not so perfect, but still a good deal (05/10/2013)

great value (06/11/2013)

Does what it's designed to do but..... (11/07/2014)

VERY ACCURATE WORKS WELL (29/09/2015)

Not suited for H110 (09/01/2018)

Read 8 more ratings on brownells.com

Customers also bought

36 Cal (.350") Lead Round Ball 100/Box
ROUND BALL MUZZLELOADING BULLETS

HORNADY

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£11.60 * £10.70 - £26.55*

Bullets

5 (2)

22 Long Rifle Go Gauge
HEADSPACE GAUGES

FORSTER

In stock 7 In stock with Brownells USA. Delivery within 7-10 days

£37.90 * £36.40 - £44.20*

Headspace Gauges

3.9 (13)

338 Lapua Priming Tool Head
SINCLAIR PRIMING TOOL

SINCLAIR INTERNATIONAL

In stock 7 In stock with Brownells USA. Delivery within 7-10 days

£13.00 * £9.45 - £86.80*

Priming Tool Accessories | Hand Tools

4.5 (27)

Bore Tech Proof-Positive Bore Stix, 7mm/30 Cal/8mm 40 inch
RIFLE CLEANING RODS

BORE TECH

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£81.80 * £80.95 - £87.85*

Cleaning Rods

4.8 (5)

7mm (0.284") 160gr Flat Base 50/Box
BARNES TRIPLE SHOCK X BULLETS

BARNES BULLETS

Out of Stock Backorder is currently not available

£45.05 * £24.20 - £81.45*

Rifle Bullets

4.9 (22)

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations:

Prices inclusive of duty & VAT.

Classical view

Mobile view