Weigand Combat

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£59.90 *

Weigand Combat 77/22®, SILVER
RUGER® SCOPEMOUNT®

The WEIG-A-TINNY Mini Revolver Scope Mount is designed to attach mini type red dot sights such as Burris Fast Fire III and Vortex Mini Style Sights to Taurus revolvers with adjustable sights.
The mount features a Self Fitting Lug TM Patent Pending design that fits itself when installed and keeps the center sight lug tight, preventing the mount from shifting even when shooting full-house, magnum loads.
The scope mount is made of aluminum, has a silver matte anodized finish, weighs 1 ounce, and comes with an attaching screw. It fits many Taurus revolvers with adjustable sights, but not fixed sight models, and does not support red dot sights weighing over 3.5 ounces.

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£84.90 * £69.90 - £84.90*

Weigand Combat RUGER® M77 MK II L/A X BLACK MOUNT
RUGER M77 MK II L/A X BLKMOUNT

4.7

In stock Delivery time approx. 2-3 days.
1 pcs. in the local warehouse
4 pcs. in the USA warehouse

£109.90 *

Weigand Combat SUPER REDHAWK® .44 MAG MOUNT
SUPER REDHAWK® MOUNT

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£74.90 *

Weigand Combat RUGER M77 MK II SHORT ACTION MOUNT - BLACK
S/A SCOPE MOUNT, RUGER M77 MK II

The SUPER REDHAWK® MOUNT WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT is a strong and lightweight aluminum mount that attaches to the Ruger® factory ring cuts without drilling and tapping. It is available in silver and black anodized finishes.
The mount uses three steel recoil pins to prevent "scope flyoff" and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. It fits .44 Magnum, .454 Casull, and Ruger™ .480 models with the removal of the rear sight.
The Super Redhawk™ .44 Mag version of the mount can be installed without removing the front and rear sights. The Super Redhawk‡ Casull version uses the rear sight notch as a recoil lug to allow the frame and mount to take maximum recoil.

In stock Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse

£99.90 *

Weigand Combat BLACK S&W MOUNT
S&W K, L, & N Frame Scope Mount

In stock Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse

£54.90 *

Weigand Combat WEIG-A-TINNY MINI REVOLVER SCOPE MOUNT FOR S&W SILVER
WEIG-A-TINNY MINI REVOLVER SCOPE MOUNT FOR SMITH & WESSON

In stock Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

£54.90 *

Weigand Combat RUGER ®MK I, MK II™, MK III™, 22/45™ SCOPE MOUNT, BLACK
RUGER® MARK I/II™/III™ DRILL & TAP SCOPEMOUNT

The WEIG-A-TINNY Mini Revolver Scope Mount is designed for Smith & Wesson revolvers manufactured after 1992, including K, L, N, and X frame revolvers that come drilled and tapped from the factory.
The scope mount replaces the rear sight and is made of aluminum with an oversize recoil lug that prevents shifting even when shooting full-house, magnum loads.
The mount accepts all Weaver-style rings and Picatinny accessories and comes with screws that are 6-48 thread. It is 2-1/2" long, weighs .9 ounces, and is available in silver.

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£41.90 * £41.90 - £43.90*

Weigand Combat RUGER® MK I, MK II™, 22/45™1-PIECE BASE, SILVER
SCOPE MOUNT RUGER® MK I/ MK II™/ 22/45™ NO GUNSMITHING

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£74.90 * £69.90 - £74.90*

Weigand Combat EXTRACTOR TENSION GAUGE SET
EXTRACTOR TENSION GAUGE SET

4.6

Weigand Combat NO DRILL & TAP MOUNT FOR RUGER SUPER BLACKHAWK BLACK
NO DRILL & TAP SCOPE MOUNT FOR RUGER™ SUPER BLACKHAWK™

In stock Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

£41.90 *

Extractor Tools

4.8

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£99.90 *

Weigand Combat EXTRACTOR TENSIONING TOOL
1911 EXTRACTOR TENSIONING TOOL

A no drill and tap scope mount for Ruger Blackhawk and Super Blackhawk revolvers that fits on any length barrel. It is not compatible with .45 Colt Caliber or 30 Carbine, Flat Top model, Hunter Model, or 357 Maximum.
The mount features a rugged two-piece construction with a billet aluminum underlug secured with two brass set screws to reduce marring of the barrel surface. Tightening the Allen screws secures the underlug to the barrel, and the scope mount is attached to the underlug and rear sight elevation hole for a no drill and tap installation.
The underlug and body are made from 6061-T6 Aluminum, and the entire assembly weighs only 2.4 ounces. The scope mount is attached to the underlug with 2, 6-40 screws and to the revolver with 1, 6-48 screw. All screws necessary for installation are included.

Weigand Combat WEIG-A-TINNY MINI REVOLVER SCOPE MOUNT FOR RUGER SILVER
WEIG-A-TINNY MINI REVOLVER SCOPE MOUNT FOR RUGER™

In stock Delivery time approx. 7-14 days.
7 pcs. in the USA warehouse

£64.90 *

Extractor Tools

Easily adjusts extractor tension with precise measurements, using the Weigand Extractor Tension Gauges for optimum extraction and feeding reliability.
Designed to put just the right bend in the extractor without over-bending, this tool is perfect for use with 1911 Government, Commander, and Officers models.
This aluminum tool has a natural finish and is 2¾" long, making it easy to carry in your range bag and keep your extractor performing at its best.

4.9

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£54.90 *

Weigand Combat 77/22® PICATINNY SCOPE BASE
77/22® TACTICAL PICATINNY SCOPE MOUNT

The WEIG-A-TINNY Mini Revolver Scope Mount is a versatile base that allows you to attach a scope to your Ruger revolver in just minutes.
It uses the existing rear sight elevation screw hole and sight spring pocket for mounting and can accept all Weaver-style attaching points and Picatinny accessories.
However, it does not fit flush on all revolver models, and Weigand Combat recommends not using sights weighing over 3.5 ounces with this scope mount. It also does not fit certain Ruger revolver models, including the SP-101, Super Redhawk, and Blackhawk "Flat Top" models.

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£84.90 *

Weigand Combat SILVER RUGER® MOUNT
RUGER® REDHAWK®/BLACKHAWK® DRILL & TAP MOUNT

The 77/22 Tactical Picatinny Scope Mount by Weigand Combat is a machined aluminum mount designed to give a rugged and stable platform for optics on your rifle's receiver.
Made to Picatinny specifications, this mount features eleven cross slots for optimum scope placement and accepts Picatinny or Weaver-style rings. The screw holes line up precisely with the factory receiver scope base hole pattern for quick and simple installation.
The mount is 5 1/8 inches long and 1/2 inch tall from the top of the receiver, with a black matte anodized finish. It is designed for use with the Ruger 77/22 model and comes with screws included.

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£54.90 *