Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom
850027445410 430105402
The ESD Magwell enhances your reloading with a purpose-driven flare. Every curve, every angle, and every feature on the ESD Magwell is intentional and aligns with ESD’s mission to enhance a shooter’s capabilities using human-centered design. Featuring symmetrical side cutouts for stripping magazines, the ESD Magwell allows for easy removal of flush-fitting magazines as well as those that have an extension. Additionally, a third cut-out is located on the front of the ESD Magwell. This third cut-out is especially useful in low light/ no light conditions and serves as a reference point for the shooter and allows them to focus on the task at hand rather than worrying about fumbling a magazine during a reload. It can also be used as an additional access point for stripping magazines. This product currently fits only Glock double-stack Gen 5 pistols chambered in 9mm and .40. Generation 3 and 4 magwells are in development and will be released at a later time. NOTE: Glock 19's plug angle is different from full-frame Glocks and requires some modification to work.
149.9 149.9 3 GBP
Product no.: 430105402
EDGAR SHERMAN DESIGN MAGWELL FOR GLOCK GEN 5 HANDGUN, OLIVE DRAB GREEN
Mfr Part: ESD-MW-G5-ODG 850027445410 The ESD Magwell enhances your reloading with a purpose-driven flare. Every curve, every angle, and every feature on the ESD Magwell is intentional and aligns with ESD’s mission to enhance a shooter’s capabilities using human-centered design. Featuring symmetrical side cutouts for stripping magazines, the ESD Magwell allows for easy removal of flush-fitting magazines as well as those that have an extension. Additionally, a third cut-out is located on the front of the ESD Magwell. This third cut-out is especially useful in low light/ no light conditions and serves as a reference point for the shooter and allows them to focus on the task at hand rather than worrying about fumbling a magazine during a reload. It can also be used as an additional access point for stripping magazines. This product currently fits only Glock double-stack Gen 5 pistols chambered in 9mm and .40. Generation 3 and 4 magwells are in development and will be released at a later time. NOTE: Glock 19's plug angle is different from full-frame Glocks and requires some modification to work.
149.9 GBP 4 £149.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Finish: Olive Drab Green Make: Glock Model: Gen 5

Top takeaways

  1. The ESD Magwell features a purpose-driven design with symmetrical side cutouts and a front cut-out to aid in magazine stripping and reloading, especially in low light conditions.
  2. This magwell is specifically designed for Glock double-stack Gen 5 pistols chambered in 9mm and .40, with future models for Gen 3 and 4 in development.
  3. The product requires some modification for use with Glock 19 due to the different plug angle compared to full-frame Glocks.

Attributes

Finish: Olive Drab Green Make: Glock Model: Gen 5 Delivery weight: 0.454kg

Item details

Made in USA
US export classification: 0A501.y.1



Product no.: 430105400
EDGAR SHERMAN DESIGN MAGWELL FOR GLOCK GEN 5 HANDGUN BLACK
Mfr Part: ESD-MW-G5-BLK 850027445274 The ESD Magwell enhances your reloading with a purpose-driven flare. Every curve, every angle, and every feature on the ESD Magwell is intentional and aligns with ESD’s mission to enhance a shooter’s capabilities using human-centered design. Featuring symmetrical side cutouts for stripping magazines, the ESD Magwell allows for easy removal of flush-fitting magazines as well as those that have an extension. Additionally, a third cut-out is located on the front of the ESD Magwell. This third cut-out is especially useful in low light/ no light conditions and serves as a reference point for the shooter and allows them to focus on the task at hand rather than worrying about fumbling a magazine during a reload. It can also be used as an additional access point for stripping magazines. This product currently fits only Glock double-stack Gen 5 pistols chambered in 9mm and .40. Generation 3 and 4 magwells are in development and will be released at a later time. NOTE: Glock 19's plug angle is different from full-frame Glocks and requires some modification to work.
149.9 GBP 0 £149.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Finish: Black Make: Glock Model: Gen 5
Product no.: 430105401
EDGAR SHERMAN DESIGN MAGWELL FOR GLOCK GEN 5 HANDGUN, FLAT DARK EARTH
Mfr Part: ESD-MW-G5-FDE 850027445403 The ESD Magwell enhances your reloading with a purpose-driven flare. Every curve, every angle, and every feature on the ESD Magwell is intentional and aligns with ESD’s mission to enhance a shooter’s capabilities using human-centered design. Featuring symmetrical side cutouts for stripping magazines, the ESD Magwell allows for easy removal of flush-fitting magazines as well as those that have an extension. Additionally, a third cut-out is located on the front of the ESD Magwell. This third cut-out is especially useful in low light/ no light conditions and serves as a reference point for the shooter and allows them to focus on the task at hand rather than worrying about fumbling a magazine during a reload. It can also be used as an additional access point for stripping magazines. This product currently fits only Glock double-stack Gen 5 pistols chambered in 9mm and .40. Generation 3 and 4 magwells are in development and will be released at a later time. NOTE: Glock 19's plug angle is different from full-frame Glocks and requires some modification to work.
149.9 GBP 0 £149.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Finish: Flat Dark Earth Make: Glock Model: Gen 5

🎯 Enhance your Glock Gen 5's reloading efficiency with ESD Magwell in Olive Drab Green! Perfect for low-light conditions. 🌟 Get yours now and experience precision! 💥

The ESD Magwell enhances your reloading with a purpose-driven flare. Every curve, every angle, and every feature on the ESD Magwell is intentional and aligns with ESD’s mission to enhance a shooter’s capabilities using human-centered design. Featuring symmetrical side cutouts for stripping magazines, the ESD Magwell allows for easy removal of flush-fitting magazines as well as those that have an extension. Additionally, a third cut-out is located on the front of the ESD Magwell. This third cut-out is especially useful in low light/ no light conditions and serves as a reference point for the shooter and allows them to focus on the task at hand rather than worrying about fumbling a magazine during a reload. It can also be used as an additional access point for stripping magazines. This product currently fits only Glock double-stack Gen 5 pistols chambered in 9mm and .40. Generation 3 and 4 magwells are in development and will be released at a later time. NOTE: Glock 19's plug angle is different from full-frame Glocks and requires some modification to work.