Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Customer ratings for SMITH ENTERPRISE M14 SCOPE MOUNT
Number of ratings: 3
From brownells.com: 3
Average rating: 3.3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
Product no.: 851000001 SMITH ENTERPRISE M14 SCOPE MOUNT Mfr Part: 2006 Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
The M14 Tactical Scope Mount is a fully-machined, hardened steel mount with a three-point mounting system for stable and secure scope attachment.
It easily attaches to the M14 or M1A without any rifle modifications and features a sight channel for iron sights use without scope removal.
Constructed from 4140 steel with a black nitride finish, the mount is hardened to Rc 60-62, measuring 5.38 inches long and 1.875 inches high, weighing 10.9 oz.
Attributes
Colour:
Black
Make:
Springfield
Material:
Steel
Model:
M14,M1A
Number of Bases:
1-Piece
Style:
Tactical Bases
Delivery weight: 0.363kg
Item details
Made in USA
🎯 Enhance your M14 with the Smith Enterprise Tactical Scope Mount! Hardened steel for stability, easy install, no rifle mods needed. Shop now for precision! 🔒🛒
Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Customer ratings for SMITH ENTERPRISE M14 SCOPE MOUNT
Number of ratings: 3
From brownells.com: 3
Average rating: 3.3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!