Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

BROWNELLS
FIXED BLADE GUNSMITH'S SCREWDRIVERS™

080451018
Crisp, Hollow-Ground Radius Gives Much More Strength, True, Precision-Ground, Hollow-Ground Blades, Excellent Fit,Superb Control, Sizes to Fit Nearly Every Gunscrew - The New Standard By Which To Judge All Others
  THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.

SPECS: 2½" (6.3cm) long shanks. 3¾" (9.5cm) long x 1"(2.5cm) dia. handle. Each screwdriver packed in individual plastic tube.

19.9 22.9 20 GBP
Product no.: 080451018
BROWNELLS #18 FIXED-BLADE SCREWDRIVER .36 SHANK .040 BLADE THICKNESS THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .040

Top takeaways

  1. The screwdriver features a precision-ground, hollow-ground tip for maximum strength and a perfect fit to prevent damage to screws.
  2. It has a long, parallel shank that is the same diameter as the blade width, allowing for regrindings and access to narrow recesses.
  3. Custom-designed handles provide a comfortable grip and control, with a consistent hand-fit across all 20 screwdrivers in the set.

Attributes

Blade Thickness: .040 Delivery weight: 0.113kg

Item details

Made in USA



Product no.: 080451001
BROWNELLS #1 FIXED-BLADE SCREWDRIVER .120 SHANK .030 BLADE THICKNESS *Screwdriver #1: .120 Shank, .030 Blade Thickness
21.9 GBP 8 £21.90 *
Delivery time approx. 7-14 days.
8 pcs. in the USA warehouse
Specs: Blade Thickness: .030
Product no.: 080451002
BROWNELLS #2 FIXED-BLADE SCREWDRIVER .120 SHANK .040 BLADE THICKNESS *#2 Screwdriver
19.9 GBP 4 £19.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs:
Product no.: 080451007
BROWNELLS #7 FIXED-BLADE SCREWDRIVER .210 SHANK .030 BLADE THICKNESS
Mfr Part: 7SCREWDRIVER 7SCREWDRIVER Screwdriver #7: .210 Shank, .030 Blade Thickness
19.9 GBP 2 £19.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Blade Thickness: .030
Product no.: 080451013
BROWNELLS #13 FIXED-BLADE SCREWDRIVER .30 SHANK .035 BLADE THICKNESS Screwdriver #13: .300 Shank, .035 Blade Thickness
19.9 GBP 2 £19.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Blade Thickness: .035
Product no.: 080451015
BROWNELLS #15 FIXED-BLADE SCREWDRIVER .30 SHANK .055 BLADE THICKNESS Screwdriver #15: .300 Shank, .055 Blade Thickness
19.9 GBP 1 £19.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Blade Thickness: .055
Product no.: 080451016
BROWNELLS #16 FIXED-BLADE SCREWDRIVER .34 SHANK .040 BLADE THICKNESS Screwdriver #16: .340 Shank, .040 Blade Thickness
19.9 GBP 2 £19.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Blade Thickness: .040
Product no.: 080451003
BROWNELLS #3 FIXED-BLADE SCREWDRIVER .150 SHANK .030 BLADE THICKNESS Screwdriver #3: .150 Shank, .030 Blade Thickness
22.9 GBP 0 £22.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .030
Product no.: 080451004
BROWNELLS #4 FIXED-BLADE SCREWDRIVER .150 SHANK .040 BLADE THICKNESS *Screwdriver #4: .150 Shank, .040 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .040
Product no.: 080451005
BROWNELLS #5 FIXED-BLADE SCREWDRIVER .180 SHANK .030 BLADE THICKNESS
Mfr Part: 5SCREWDRIVER 5SCREWDRIVER Screwdriver #5: .180 Shank, .030 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .030
Product no.: 080451006
BROWNELLS #6 FIXED-BLADE SCREWDRIVER .180 SHANK .040 BLADE THICKNESS
Mfr Part: 6SCREWDRIVER 6SCREWDRIVER *Screwdriver #6: .180 Shank, .040 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .040
Product no.: 080451008
BROWNELLS #8 FIXED-BLADE SCREWDRIVER .210 SHANK .040 BLADE THICKNESS *Screwdriver #8: .210 Shank, .040 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .040
Product no.: 080451009
BROWNELLS #9 FIXED-BLADE SCREWDRIVER .240 SHANK .030 BLADE THICKNESS
Mfr Part: 9SCREWDRIVER 9SCREWDRIVER THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .030
Product no.: 080451010
BROWNELLS #10 FIXED-BLADE SCREWDRIVER .240 SHANK .04 BLADE THICKNESS *Screwdriver #10: .240 Shank, .040 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .040
Product no.: 080451011
BROWNELLS #11 FIXED-BLADE SCREWDRIVER .27 SHANK .035 BLADE THICKNESS
Mfr Part: 11SCREWDRIVER Screwdriver #11: .270 Shank, .035 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .035
Product no.: 080451012
BROWNELLS #12 FIXED-BLADE SCREWDRIVER .27 SHANK .045 BLADE THICKNESS
Mfr Part: 12SCREWDRIVER *Screwdriver #12: .270 Shank, .045 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .045
Product no.: 080451014
BROWNELLS #14 FIXED-BLADE SCREWDRIVER .30 SHANK .045 BLADE THICKNESS *Screwdriver #14: .300 Shank, .045 Blade Thickness
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .045
Product no.: 080451017
BROWNELLS #17 FIXED-BLADE SCREWDRIVER .34 SHANK .050 BLADE THICKNESS *#17 Screwdriver
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs:
Product no.: 080451019
BROWNELLS #19 FIXED-BLADE SCREWDRIVER .36 SHANK .050 BLADE THICKNESS
Mfr Part: 19SCREWDRIVER THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .050
Product no.: 080451020
BROWNELLS #20 FIXED-BLADE SCREWDRIVER .36 SHANK .060 BLADE THICKNESS THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.
19.9 GBP 0 £19.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Blade Thickness: .060

🔩 Enhance your gunsmithing with the precision-crafted #18 Brownells Fixed-Blade Screwdriver! 🛠️ Perfect fit, max strength & control. Shop now for top-notch tools! 🔍

Crisp, Hollow-Ground Radius Gives Much More Strength, True, Precision-Ground, Hollow-Ground Blades, Excellent Fit,Superb Control, Sizes to Fit Nearly Every Gunscrew - The New Standard By Which To Judge All Others
  THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.

SPECS: 2½" (6.3cm) long shanks. 3¾" (9.5cm) long x 1"(2.5cm) dia. handle. Each screwdriver packed in individual plastic tube.

In stock
£22.90 *
5
Reordered
£9.90 *
3
Newsletter